* httpcaddyfile: Fix unexpectedly removed policy
When user set on_demand tls option in a catch-all (:443) policy,
we expect other policies to not have the on_demand enabled
See ex in tls_automation_policies_5.txt
Btw, we can remove policies if they are **all** empty.
* Update caddyconfig/httpcaddyfile/tlsapp.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyfile: Fix `import` replacing unrelated placeholders
See https://caddy.community/t/snippet-issue-works-outside-snippet/12231
So it turns out that `NewReplacer()` gives a replacer with some global defaults (like `{env.*}` and some system and time placeholders), which is not ideal when running `import` because we just want to replace `{args.*}` only, and nothing else.
* caddyfile: Add test
* caddyfile: reject recursive self-imports
* caddyfile: detect and reject cyclic imports of snippets and files
* caddyfile: do not be stickler about connected nodes not being connected already
* caddyfile: include missing test artifacts of cyclic imports
* address review comments
This change is aimed at enhancing the logging module within the
Caddyfile directive to allow users to configure logs other than the HTTP
access log stream, which is the current capability of the Caddyfile [1].
The intent here is to leverage the same syntax as the server log
directive at a global level, so that similar customizations can be added
without needing to resort to a JSON-based configuration.
Discussion for this approach happened in the referenced issue.
Closes https://github.com/caddyserver/caddy/issues/3958
[1] https://caddyserver.com/docs/caddyfile/directives/log
Allows conveniently setting the resolvers for the DNS challenge using a TLS subdirective, which applies to default issuers, rather than having to explicitly define the issuers and overwrite the defaults.
The HTTP Caddyfile adapter can now configure the PKI app, and the acme_server directive can now be used to specify a custom CA used for issuing certificates. More customization options can follow later as needed.
If `tls <email>` is used, we should apply that to all applicable default issuers, not drop them. This refactoring applies implicit ACME issuer settings from the tls directive to all default ACME issuers, like ZeroSSL.
We also consolidate some annoying logic and improve config validity checks.
Ref: https://caddy.community/t/error-obtaining-certificate-after-caddy-restart/11335/8
* caddyhttp: Implement handler abort; new 'abort' directive (close#3871)
* Move abort directive ordering; clean up redirects
Seems logical for the end-all of handlers to go at the... end.
The Connection header no longer needs to be set there, since Close is
true, and the static_response handler now does that.
This commits dds 3 separate, but very related features:
1. Automated server identity management
How do you know you're connecting to the server you think you are? How do you know the server connecting to you is the server instance you think it is? Mutually-authenticated TLS (mTLS) answers both of these questions. Using TLS to authenticate requires a public/private key pair (and the peer must trust the certificate you present to it).
Fortunately, Caddy is really good at managing certificates by now. We tap into that power to make it possible for Caddy to obtain and renew its own identity credentials, or in other words, a certificate that can be used for both server verification when clients connect to it, and client verification when it connects to other servers. Its associated private key is essentially its identity, and TLS takes care of possession proofs.
This configuration is simply a list of identifiers and an optional list of custom certificate issuers. Identifiers are things like IP addresses or DNS names that can be used to access the Caddy instance. The default issuers are ZeroSSL and Let's Encrypt, but these are public CAs, so they won't issue certs for private identifiers. Caddy will simply manage credentials for these, which other parts of Caddy can use, for example: remote administration or dynamic config loading (described below).
2. Remote administration over secure connection
This feature adds generic remote admin functionality that is safe to expose on a public interface.
- The "remote" (or "secure") endpoint is optional. It does not affect the standard/local/plaintext endpoint.
- It's the same as the [API endpoint on localhost:2019](https://caddyserver.com/docs/api), but over TLS.
- TLS cannot be disabled on this endpoint.
- TLS mutual auth is required, and cannot be disabled.
- The server's certificate _must_ be obtained and renewed via automated means, such as ACME. It cannot be manually loaded.
- The TLS server takes care of verifying the client.
- The admin handler takes care of application-layer permissions (methods and paths that each client is allowed to use).\
- Sensible defaults are still WIP.
- Config fields subject to change/renaming.
3. Dyanmic config loading at startup
Since this feature was planned in tandem with remote admin, and depends on its changes, I am combining them into one PR.
Dynamic config loading is where you tell Caddy how to load its config, and then it loads and runs that. First, it will load the config you give it (and persist that so it can be optionally resumed later). Then, it will try pulling its _actual_ config using the module you've specified (dynamically loaded configs are _not_ persisted to storage, since resuming them doesn't make sense).
This PR comes with a standard config loader module called `caddy.config_loaders.http`.
Caddyfile config for all of this can probably be added later.
COMMITS:
* admin: Secure socket for remote management
Functional, but still WIP.
Optional secure socket for the admin endpoint is designed
for remote management, i.e. to be exposed on a public
port. It enforces TLS mutual authentication which cannot
be disabled. The default port for this is :2021. The server
certificate cannot be specified manually, it MUST be
obtained from a certificate issuer (i.e. ACME).
More polish and sensible defaults are still in development.
Also cleaned up and consolidated the code related to
quitting the process.
* Happy lint
* Implement dynamic config loading; HTTP config loader module
This allows Caddy to load a dynamic config when it starts.
Dynamically-loaded configs are intentionally not persisted to storage.
Includes an implementation of the standard config loader, HTTPLoader.
Can be used to download configs over HTTP(S).
* Refactor and cleanup; prevent recursive config pulls
Identity management is now separated from remote administration.
There is no need to enable remote administration if all you want is identity
management, but you will need to configure identity management
if you want remote administration.
* Fix lint warnings
* Rename identities->identifiers for consistency
Previous commit improved the Caddyfile adapter so it doesn't unnecessarily add names to "skip" in "auto_https" when the server is already HTTP-only.
This commit updates the tests to reflect that change, while also fixing the Caddyfile formatting in many of the tests.
We also print the line number of the divergence between input and formatted version in Caddyfile adapt warnings - very useful for finding initial formatting problems.
This is probably an invasive change, but existing tests continue to pass.
It seems to make sense this way. There is likely an edge case I haven't
considered.
Allows user to disable OCSP stapling (including support in the Caddyfile via the ocsp_stapling global option) or overriding responder URLs. Useful in environments where responders are not reachable due to firewalls.
This changes the signature of UnmarshalGlobalFunc but this is probably OK since it's only used by this repo as far as we know.
We need this change in order to "remember" the previous value in case a global option appears more than once, which is now a possibility with the cert_issuer option since Caddy now supports multiple issuers in the order defined by the user.
Bonus: the issuer subdirective of tls now supports one-liner for "acme" when all you need to set is the directory:
issuer acme <dir>
* caddyfile: Introduce basic linting and fmt check
This will help encourage people to keep their Caddyfiles tidy.
* Remove unrelated tests
I am not sure that testing the output of warnings here is quite the
right idea; these tests are just for syntax and parsing success.
* httpcaddyfile: First pass at implementing server options
* httpcaddyfile: Add listener wrapper support
* httpcaddyfile: Sort sbaddrs to make adapt output more deterministic
* httpcaddyfile: Add server options adapt tests
* httpcaddyfile: Windows line endings lol
* caddytest: More windows line endings lol (sorry Matt)
* Update caddyconfig/httpcaddyfile/serveroptions.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Reword listener address "matcher"
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Deprecate experimental_http3 option (moved to servers)
* httpcaddyfile: Remove validation step, no longer needed
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* ci: Use golangci's github action for linting
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix most of the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the prealloc lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the misspell lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the varcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the errcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the bodyclose lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the deadcode lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the unused lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosec lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosimple lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the ineffassign lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert the misspell change, use a neutral English
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove broken golangci-lint CI job
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Re-add errantly-removed weakrand initialization
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* don't break the loop and return
* Removing extra handling for null rootKey
* unignore RegisterModule/RegisterAdapter
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* single-line log message
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Fix lint after a1808b0dbf209c615e438a496d257ce5e3acdce2 was merged
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert ticker change, ignore it instead
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Ignore some of the write errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove blank line
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Use lifetime
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* close immediately
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Preallocate configVals
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddytls/distributedstek/distributedstek.go
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* implement default values for header directive
closes#3804
* remove `set_default` header op and rely on "require" handler instead
This has the following advantages over the previous attempt:
- It does not introduce a new operation for headers, but rather nicely
extends over an existing feature in the header handler.
- It removes the need to specify the header as "deferred" because it is
already implicitely deferred by the use of the require handler. This
should be less confusing to the user.
* add integration test for header directive in caddyfile
* bubble up errors when parsing caddyfile header directive
* don't export unnecessarily and don't canonicalize headers unnecessarily
* fix response headers not passed in blocks
* caddyfile: fix clash when using default header in block
Each header is now set in a separate handler so that it doesn't clash
with other headers set/added/deleted in the same block.
* caddyhttp: New idle_timeout default of 5m
* reverseproxy: fix random hangs on http/2 requests with server push (#3875)
see https://github.com/golang/go/issues/42534
* Refactor and cleanup with improvements
* More specific link
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
Co-authored-by: Денис Телюх <telyukh.denis@gmail.com>
* caddytls: Support multiple issuers
Defaults are Let's Encrypt and ZeroSSL.
There are probably bugs.
* Commit updated integration tests, d'oh
* Update go.mod
* httpcaddyfile: Revise automation policy generation
This should fix a frustrating edge case where wildcard subjects are
used, which potentially get shadowed by more specific versions of
themselves; see the new tests for an example. This change is motivated
by an actual customer requirement.
Although all the tests pass, this logic is incredibly complex and
nuanced, and I'm worried it is not correct. But it took me about 4 days
to get this far on a solution. I did my best.
* Fix typo
We have users that have site blocks like *.*.tld with on-demand TLS
enabled. While *.*.tld does not qualify for a publicly-trusted cert due
to its wildcards, On-Demand TLS does not actually obtain a cert with
those wildcards, since it uses the actual hostname on the handshake.
This improves on that logic, but I am still not 100% satisfied with the
result since I think we need to also check if another site block is more
specific, like foo.example.tld, which might not have on-demand TLS
enabled, and make sure an automation policy gets created before the
more general policy with on-demand...
* httpcaddyfile: Ensure handle_path is sorted as equal to handle
* httpcaddyfile: Make mutual exclusivity grouping deterministic (I hope)
* httpcaddyfile: Add comment linking to the issue being fixed
* httpcaddyfile: Typo fix, comment clarity
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Update caddyconfig/httpcaddyfile/httptype.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
We recently introduced `if !cp.SettingsEmpty()` which conditionally
adds the connection policy to the list. If the condition evaluates to
false, the policy wouldn't actually be added, even if
hasCatchAllTLSConnPolicy was set to true on the previous line.
Now we set that variable in accordance with whether we actually add
the policy.
While debugging this I noticed that catch-all policies added early in
that loop (i.e. not at the end if we later determine we need one) are
not always at the end of the list. They should be, though, since they
are selected by which one matches first, and having a catch-all first
would nullify any more specific ones later in the list. So I added a
sort in consolidateConnPolicies to take care of that.
Should fix#3670 and
https://caddy.community/t/combining-on-demand-tls-with-custom-ssl-certs-doesnt-seem-to-work-in-2-1-1/9719
but I won't know for sure until somebody verifies it, since at least in
the GitHub issue there is not yet enough information (the configs are
redacted).
* httpcaddyfile: Flip `root` directive sort order
* httpcaddyfile: Sort directives with any matcher before those with none
* httpcaddyfile: Generalize reverse sort directives, improve logic
* httpcaddyfile: Fix "spelling" issue
* httpcaddyfile: Turns out the second change precludes the first
httpcaddyfile: Delete test that no longer makes sense
* httpcaddyfile: Shorten logic
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddytls: Add support for ZeroSSL; add Caddyfile support for issuers
Configuring issuers explicitly in a Caddyfile is not easily compatible
with existing ACME-specific parameters such as email or acme_ca which
infer the kind of issuer it creates (this is complicated now because
the ZeroSSL issuer wraps the ACME issuer)... oh well, we can revisit
that later if we need to.
New Caddyfile global option:
{
cert_issuer <name> ...
}
Or, alternatively, as a tls subdirective:
tls {
issuer <name> ...
}
For example, to use ZeroSSL with an API key:
{
cert_issuser zerossl API_KEY
}
For now, that still uses ZeroSSL's ACME endpoint; it fetches EAB
credentials for you. You can also provide the EAB credentials directly
just like any other ACME endpoint:
{
cert_issuer acme {
eab KEY_ID MAC_KEY
}
}
All these examples use the new global option (or tls subdirective). You
can still use traditional/existing options with ZeroSSL, since it's
just another ACME endpoint:
{
acme_ca https://acme.zerossl.com/v2/DV90
acme_eab KEY_ID MAC_KEY
}
That's all there is to it. You just can't mix-and-match acme_* options
with cert_issuer, because it becomes confusing/ambiguous/complicated to
merge the settings.
* Fix broken test
This test was asserting buggy behavior, oops - glad this branch both
discovers and fixes the bug at the same time!
* Fix broken test (post-merge)
* Update modules/caddytls/acmeissuer.go
Fix godoc comment
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Add support for ZeroSSL's EAB-by-email endpoint
Also transform the ACMEIssuer into ZeroSSLIssuer implicitly if set to
the ZeroSSL endpoint without EAB (the ZeroSSLIssuer is needed to
generate EAB if not already provided); this is now possible with either
an API key or an email address.
* go.mod: Use latest certmagic, acmez, and x/net
* Wrap underlying logic rather than repeating it
Oops, duh
* Form-encode email info into request body for EAB endpoint
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Bring `ensure_origin` and `origins` to caddyfile admin config
* Add unit test for caddyfile admin config update
* Add caddyfile adapt test for typical admin setup
* httpcaddyfile: Replace admin config error message when there's more arguments than needed
Replace d.Err() to d.ArgErr() since the latter provides similarly informative error message
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* push: Implement HTTP/2 server push (close#3551)
* push: Abstract header ops by embedding into new struct type
This will allow us to add more fields to customize headers in
push-specific ways in the future.
* push: Ensure Link resources are pushed before response is written
* Change header name from X-Caddy-Push to Caddy-Push
Catch-alls should always go last. Normally this is the case, but we have
a special case for comparing one wildcard-host site block to another
non-wildcard host site block; and a catch-all site block is also a
non-wildcard host site block, so now we have to special-case the
catch-all site block. Sigh.
This could be reproduced with a Caddyfile that has two site blocks:
":80" and "*.example.com", in that order.
* Adds global options for external account bindings
* Maybe other people use ctags too?
* Use nested block to configure external account
* go format files
* Restore acme_ca directive in test file
* Change Caddyfile config syntax for acme_eab
* Update test
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyconfig: WIP implementation of handle_path
* caddyconfig: Complete the implementation - h.NewRoute was key
* caddyconfig: Add handle_path integration test
* caddyhttp: Use the path matcher as-is, strip the trailing *, update test
* httpcaddyfile: Add shorthands for parameterized placeholders
httpcaddyfile: Now with regexp instead
httpcaddyfile: Allow dashes, gofmt
httpcaddyfile: Compile regexp only once
httpcaddyfile: Cleanup struct
httpcaddyfile: Optimize the replacers, pull out of the loop
httpcaddyfile: Add `{port}` shorthand
* httpcaddyfile: Switch `r.` to `re.`
* caddy: Add support for `d` duration unit
* Improvements to ParseDuration; add unit tests
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Make global options pluggable
* httpcaddyfile: Add a global options adapt test
* httpcaddyfile: Wrap err
Co-Authored-By: Dave Henderson <dhenderson@gmail.com>
* httpcaddyfile: Revert wrap err
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
https://caddy.community/t/cant-get-simple-alias-to-work/7911/8?u=matt
This removes an optimization where we amortized path matcher decoding.
The decoded matchers were index by... position... which obviously
changes during sorting. Duh.
Anyway, sorting is sliiightly slower now but the Caddyfile is not
really CPU-sensitive, so this is fine.
This can lead to nicer, smaller JSON output for Caddyfiles like this:
a {
tls internal
}
b {
tls foo@bar.com
}
i.e. where the tls directive only configures automation policies, and
is merely meant to enable TLS on a server block (if it wasn't implied).
This helps keeps implicit config implicit.
Needs a little more testing to ensure it doesn't break anything
important.
* httpcaddyfile: Exclude access logs written to files from default log
Even though any logs can just be ignored, most users don't seem to like
configuring an access log to go to a file only to have it doubly appear
in the default log.
Related to:
- #3294
- https://caddy.community/t/v2-logging-format/7642/4?u=matt
- https://caddy.community/t/caddyfile-questions/7651/3?u=matt
* caddyhttp: General improvements to access log controls (fixes#3310)
* caddyhttp: Move log config nil check higher
* Rename LoggerName -> DefaultLoggerName
Panic would happen if an automation policy was specified in a singular
server block that had no hostnames in its address. Definitely an edge
case.
Fixed a bug related to checking for server blocks with a host-less key
that tried to make an automation policy. Previously if you had only two
server blocks like ":443" and another one at ":80", the one at ":443"
could not create a TLS automation policy because it thought it would
interfere with TLS automation for the block at ":80", but obviously that
key doesn't enable TLS because it is on the HTTP port. So now we are a
little smarter and count only non-HTTP-empty-hostname keys.
Also fixed a bug so that a key like "https://:1234" is sure to have TLS
enabled by giving it a TLS connection policy. (Relaxed conditions
slightly; the previous conditions were too strict, requiring there to be
a TLS conn policy already or a default SNI to be non-empty.)
Also clarified a comment thanks to feedback from @Mohammed90
These functions are called at init-time, and their inputs are hard-coded
so there are no environmental or user factors that could make it fail
or succeed; the error return values are often ignored, and when they're
not, they are usually a fatal error anyway. To ensure that a programmer
mistake is not missed, we now panic instead.
Last breaking change 🤞
- Create two default automation policies; if the TLS app is used in
isolation with the 'automate' certificate loader, it will now use
an internal issuer for internal-only names, and an ACME issuer for
all other names by default.
- If the HTTP Caddyfile adds an 'automate' loader, it now also adds an
automation policy for any names in that loader that do not qualify
for public certificates so that they will be issued internally. (It
might be nice if this wasn't necessary, but the alternative is to
either make auto-HTTPS logic way more complex by scanning the names in
the 'automate' loader, or to have an automation policy without an
issuer switch between default issuer based on the name being issued
a certificate - I think I like the latter option better, right now we
do something kind of like that but at a level above each individual
automation policies, we do that switch only when no automation
policies match, rather than when a policy without an issuer does
match.)
- Set the default LoggerName rather than a LoggerNames with an empty
host value, which is now taken literally rather than as a catch-all.
- hostsFromKeys, the function that gets a list of hosts from server
block keys, no longer returns an empty string in its resulting slice,
ever.
We now store the parsed site/server block keys with the server block,
rather than parsing the addresses every time we read them.
Also detect conflicting schemes, i.e. TLS and non-TLS cannot be served
from the same server (natively -- modules could be built for it).
Also do not add site subroutes (subroutes generated specifically from
site blocks in the Caddyfile) that are empty.
Thus far the fuzzers have found a few crashers in the Caddyfile parser. However, the fuzzer have been stuck at import glob expansion after import glob expansion, which aren't reproducible.
Certificate selection used to be a module, but this seems unnecessary,
especially since the built-in CustomSelectionPolicy allows quite complex
selection logic on a number of fields in certs. If we need to extend
that logic, we can, but I don't think there are SO many possibilities
that we need modules.
This update also allows certificate selection to choose between multiple
matching certs based on client compatibility and makes a number of other
improvements in the default cert selection logic, both here and in the
latest CertMagic.
The hardest part of this was the conn policy consolidation logic
(Caddyfile only, of course). We have to merge connection policies that
we can easily combine, because if two certs are manually loaded in a
Caddyfile site block, that produces two connection policies, and each
cert is tagged with a different tag, meaning only the first would ever
be selected. So given the same matchers, we can merge the two, but this
required improving the Tag selection logic to support multiple tags to
choose from, hence "tags" changed to "any_tag" or "all_tags" (but we
use any_tag in our Caddyfile logic).
Combining conn policies with conflicting settings is impossible, so
that should return an error if two policies with the exact same matchers
have non-empty settings that are not the same (the one exception being
any_tag which we can merge because the logic for them is to OR them).
It was a bit complicated. It seems to work in numerous tests I've
conducted, but we'll see how it pans out in the release candidates.
If a site block has a key like "http://localhost:2016", then the log for
that site must be mapped to "localhost:2016" and not just "localhost"
because "localhost:2016" will be the value of the Host header of requests.
But a key like "localhost:80" does not include the port since the Host
header will not include ":80" because it is a standard port.
Fixes https://caddy.community/t/v2-common-log-format-not-working/7352?u=matt
See https://caddy.community/t/v2-match-any-path-but-files/7326/8?u=matt
If rewrites (or redirects, for that matter) match on file existence,
the file matcher would need to know the root of the site.
Making this change implies that root directives that depend on rewritten
URIs will not work as expected. However, I think this is very uncommon,
and am not sure I have ever seen that. Usually, dynamic roots are based
on host, not paths or query strings.
I suspect that rewrites based on file existence will be more common than
roots based on rewritten URIs, so I am moving root to be the first in
the list.
Users can always override this ordering with the 'order' global option.
* admin: Refactor /load endpoint out of caddy package
This eliminates the caddy package's dependency on the caddyconfig
package, which helps prevent import cycles.
* v2: adapter: register config adapters as Caddy modules
* v2: adapter: simplify adapter registration as adapters and modules
* v2: adapter: let RegisterAdapter be in charge of registering adapters as modules
* v2: adapter: remove underscrores placeholders
* v2: adapter: explicitly ignore the error of writing response of writing warnings back to client
* Implicitly wrap config adapters as modules
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* rewrite: strip_prefix, strip_suffix, uri_replace -> uri (closes#3140)
* Add period, to satisfy @whitestrake :) and my own OCD
* Restore implied / prefix
It's hard to say whether this was actually a bug, but the linked issue
shows why the old behavior was confusing. Basically, we infer that a
rewrite handler is supposed to act as an internal redirect, which likely
means it will no longer match the matcher(s) it did before the rewrite.
So if the rewrite directive shares a matcher with any adjacent route or
directive, it can be confusing/misleading if we consolidate the rewrite
into the same route as the next handler, which shouldn't (probably) match
after the rewrite is complete.
This is kiiiind of a hacky workaround to a quirky problem.
For edge cases like these, it is probably "cleaner" to just use handle
blocks instead, to group handlers under the same matcher, nginx-style.
* added sni tests
* set the default sni when there is no host to match
* removed invalid sni test. Disabled tests that rely on host headers.
* readded SNI tests. Added logging of config load times
* add integration tests
* removed SNI test
* remove integration test condition
* minor edit
* fix sni when using static certificates
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* pki: Initial commit of PKI app (WIP) (see #2502 and #3021)
* pki: Ability to use root/intermediates, and sign with root
* pki: Fix benign misnamings left over from copy+paste
* pki: Only install root if not already trusted
* Make HTTPS port the default; all names use auto-HTTPS; bug fixes
* Fix build - what happened to our CI tests??
* Fix go.mod
This is a breaking change primarily in two areas:
- Storage paths for certificates have changed
- Slight changes to JSON config parameters
Huge improvements in this commit, to be detailed more in
the release notes.
The upcoming PKI app will be powered by Smallstep libraries.
* remove the certificate tag tracking from global state
* refactored helper state, added log counter
* moved state initialisation close to where it is used.
* added helper state comment
Previously the formatter did not include support for
blocks inside other blocks. Hence the formatter could
not indent some files properly. This fixes it.
Fixes#3104
Signed-off-by: Vaibhav <vrongmeal@gmail.com>
This takes the config file as input and formats it.
Prints the result to stdout. Can write changes to
file if `--write` flag is passed.
Fixes#3020
Signed-off-by: Vaibhav <vrongmeal@gmail.com>
Small expansion to the work done in https://github.com/caddyserver/caddy/pull/2963 which simply calls `os.ExpandEnv` so env vars like `{$URL}` where `$URL=$SCHEME://$HOST:$PORT` (contrived) get the expanded $SCHEME, $HOST, and $PORT variables included
* httpcaddyfile: Begin implementing log directive, and debug mode
For now, debug mode just sets the log level for all logs to DEBUG
(unless a level is specified explicitly).
* httpcaddyfile: Finish 'log' directive
Also rename StringEncoder -> SingleFieldEncoder
* Fix minor bug in replacer (when vals are empty)
* caddytls: Add CipherSuiteName and ProtocolName functions
The cipher_suites.go file is derived from a commit to the Go master
branch that's slated for Go 1.14. Once Go 1.14 is released, this file
can be removed.
* caddyhttp: Use commonLogEmptyValue in common_log replacer
* caddyhttp: Add TLS placeholders
* caddytls: update unsupportedProtocols
Don't export unsupportedProtocols and update its godoc to mention that
it's used for logging only.
* caddyhttp: simplify getRegTLSReplacement signature
getRegTLSReplacement should receive a string instead of a pointer.
* caddyhttp: Remove http.request.tls.client.cert replacer
The previous behavior of printing the raw certificate bytes was ported
from Caddy 1, but the usefulness of that approach is suspect. Remove
the client cert replacer from v2 until a use case is presented.
* caddyhttp: Use tls.CipherSuiteName from Go 1.14
Remove ported version of CipherSuiteName in the process.
See end of issue #3004. Loading the same certificate file multiple times
with different tags will result in it being de-duplicated in the in-
memory cache, because of course they all have the same bytes. This
meant that any certs of the same filename loaded with different tags
would be overwritten by the next certificate of the same filename, and
any conn policies looking for the tags of the previous ones would never
find them, causing connections to fail.
So, now we remember cert filenames and their tags, instead of loading
them multiple times and overwriting previous ones.
A user crafting their own JSON might make this error too... maybe we
won't see it happen. But if it does, one possibility is, when loading
a duplicate cert, instead of discarding it completely, merge the tag
list into the one that's already stored in the cache, then discard.
Configuration via the Caddyfile requires use of env variables, but
an upstream issue is currently blocking that:
https://github.com/go-acme/lego/issues/1054
Providers will need to be retrofitted upstream in order to support env
var configuration.
If user provides their own certs or makes any hostname-specific TLS
connection policy, it means that no TLS connection would be served for
any other hostnames, even though you'd expect that TLS is enabled for
them, too. So now we append a catch-all conn policy if none exist, which
allows all ClientHellos to be matched and served.
We also fix the consolidation of automation policies, which previously
gobbled up automation policies without hosts in favor of automation
policies with hosts. Instead of a host-specific policy eating up an
identical catch-all policy, the catch-all policy eats up the identical
host-specific policy, ensuring that the policy is applied to all hosts
which need it.
See also:
https://caddy.community/t/v2-automatic-https-certificate-errors/6847/9?u=matt
This ensure that if there are multiple certs that match a particular
ServerName or other parameter, then specifically the one the user
provided in the Caddyfile will be used.
Before, listener ports could be wrong because ParseAddress doesn't know
about the user-configured HTTP/HTTPS ports, instead hard-coding port 80
or 443, which could be wrong if the user changed them to something else.
Now we defer port and scheme validation/inference to a later part of
building the output JSON.
Using rewrite is like saying, "I accept this request, but I just need
to act on it as if it came in differently."
Whereas redir implies more of, "I reject this request, send it to me
differently, then I will process it."
Makes sense for it to come before rewrites. This can always be changed
using the 'order' global option if needed.
The fix that was initially put forth in #2971 was good, but only for
up to one layer of nesting. The real problem was that we forgot to
increment nesting when already inside a block if we saw another open
curly brace that opens another block (dispenser.go L157-158).
The new 'handle' directive allows HTTP Caddyfiles to be designed more
like nginx location blocks if the user prefers. Inside a handle block,
directives are still ordered just like they are outside of them, but
handler blocks at a given level of nesting are mutually exclusive.
This work benefitted from some refactoring and cleanup.
This allows individual directives to be ordered relative to others,
where order matters (for example HTTP handlers). Will primarily be
useful when developing new directives, so you don't have to modify the
Caddy source code. Can also be useful if you prefer that redir comes
before rewrite, for example. Note that these are global options. The
route directive can be used to give a specific order to a specific group
of HTTP handler directives.
In the v1 Caddyfile, only the first matching site definition would be
used, so setting these `Terminal: true` ensures that only the first
matching one is used in v2, too.
We also have to sort by key specificity... Caddy 1 had a special data
structure for selecting the most specific site definition, but we don't
have that structure in v2, so we need to sort by length (of host and
path, separately). For blocks where more than one key is present, we
choose the longest host and path (independently, need not be from same
key) by which to sort.
When we append a token to the new dispenser, we need to consume it in the parent, too; otherwise it gets scanned twice, which in this case messed up the nesting count which got decremented once too many times.
* fix replacing variables on imported files
* refactored replaceEnvVars to ensure it is always called
* Use byte slices for easier use
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
This is because of our sequential handling logic which was recently
merged; if vars is the first handler in the chain, it will be run before
the next route's matchers are executed, so there's no need to nest the
handlers anymore.
* http: path matcher: exact match by default; substring matches (#2959)
This is a breaking change.
* caddyfile: Change "matcher" directive to "@matcher" syntax (#2959)
* cmd: Assume caddyfile adapter for config files named Caddyfile
* Sub-sort handlers by path matcher length (#2959)
Caddyfile-generated subroutes have handlers, which are sorted first by
directive order (this is unchanged), but within directives we now sort
by specificity of path matcher in descending order (longest path first,
assuming that longest path is most specific).
This only applies if there is only one matcher set, and the path
matcher in that set has only one path in it. Path matchers with two or
more paths are not sorted like this; and routes with more than one
matcher set are not sorted like this either, since specificity is
difficult or impossible to infer correctly.
This is a special case, but definitely a very common one, as a lot of
routing decisions are based on paths.
* caddyfile: New 'route' directive for appearance-order handling (#2959)
* caddyfile: Make rewrite directives mutually exclusive (#2959)
This applies only to rewrites in the top-level subroute created by the
HTTP caddyfile.
* transform a caddyfile with environment variables
* support adapt time and runtime variables in the caddyfile
* caddyfile: Pre-process environment variables before parsing
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
This commit goes a long way toward making automated documentation of
Caddy config and Caddy modules possible. It's a broad, sweeping change,
but mostly internal. It allows us to automatically generate docs for all
Caddy modules (including future third-party ones) and make them viewable
on a web page; it also doubles as godoc comments.
As such, this commit makes significant progress in migrating the docs
from our temporary wiki page toward our new website which is still under
construction.
With this change, all host modules will use ctx.LoadModule() and pass in
both the struct pointer and the field name as a string. This allows the
reflect package to read the struct tag from that field so that it can
get the necessary information like the module namespace and the inline
key.
This has the nice side-effect of unifying the code and documentation. It
also simplifies module loading, and handles several variations on field
types for raw module fields (i.e. variations on json.RawMessage, such as
arrays and maps).
I also renamed ModuleInfo.Name -> ModuleInfo.ID, to make it clear that
the ID is the "full name" which includes both the module namespace and
the name. This clarity is helpful when describing module hierarchy.
As of this change, Caddy modules are no longer an experimental design.
I think the architecture is good enough to go forward.
* Always cleanup admin endpoint first
* Error out if no config has been set (#2833)
* Ignore explicitly missing admin config (#2833)
* Separate config loading from admin initialization (#2833)
* Add admin option to specify admin listener address (#2833)
* Use zap for reporting admin endpoint status
* fuzz: add missing fuzzer by fixing .gitignore adding a negation for caddyfile/ directory
* ci: print fuzzing type for debuggability and traceability
* README: update the Fuzzit badge to point to the correct Caddy server Github organization
* fuzz: lay down the foundation for continuous fuzzing
* improve the fuzzers and add some
* fuzz: add Fuzzit badge to README & enable fuzzers submission in CI
* v2-fuzz: do away with the submodule approach for fuzzers
* fuzz: enable fuzzit
* file_server: Make tests work on Windows
* caddyfile: Fix escaping when character is not escapable
We only escape certain characters depending on inside or outside of
quotes (mainly newlines and quotes). We don't want everyone to have to
escape Windows file paths like C:\\Windows\\... but we can't drop the
\ either if it's just C:\Windows\...
* v2: split golangci-lint configuration into its own file to allow code editors to take advantage of it
* v2: simplify code
* v2: set the correct lint output formatting
* v2: invert the logic of linter's configuration of output formatting to allow the editor convenience over CI-specific customization. Customize the output format in CI by passing the flag.
* v2: remove irrelevant golangci-lint config
This implements HTTP basicauth into Caddy 2. The basic auth module will
not work with passwords that are not securely hashed, so a subcommand
hash-password was added to make it convenient to produce those hashes.
Also included is Caddyfile support.
Closes#2747.
This integrates a feature that was previously reserved for enterprise
users, according to https://github.com/caddyserver/caddy/issues/2786.
The /config and /id endpoints make granular config changes possible as
well as the exporting of the current configuration.
The /load endpoint has been modified to wrap the /config handler so that
the currently-running config can always be available for export. The
difference is that /load allows configs of varying formats and converts
them using config adapters. The adapted config is then processed with
/config as JSON. The /config and /id endpoints accept only JSON.
Newlines (\n) can be escaped outside of quoted areas and the newline
will be treated as whitespace but not as an actual line break. Escaping
newlines inside a quoted area is not necessary, and because quotes
trigger literal interpretation of the contents, the escaping backslash
will be parsed as a literal backslash, and the newline will not be
escaped.
Caveat: When a newline is escaped, tokens after it until an unescaped
newline will appear to the parser be on the same line as the initial
token after the last unescaped newline. This may technically lead to
some false line numbers if errors are given, but escaped newlines are
counted so that the next token after an unescaped newline is correct.
See #2766
Before this change, only response headers could be manipulated with the
Caddyfile's 'header' directive.
Also handle the request Host header specially, since the Go standard
library treats it separately from the other header fields...
Use piles from which to draw config values.
Module values can return their name, so now we can do two-way mapping
from value to name and name to value; whereas before we could only map
name to value. This was problematic with the Caddyfile adapter since
it receives values and needs to know the name to put in the config.
Along with several other changes, such as renaming caddyhttp.ServerRoute
to caddyhttp.Route, exporting some types that were not exported before,
and tweaking the caddytls TLS values to be more consistent.
Notably, we also now disable automatic cert management for names which
already have a cert (manually) loaded into the cache. These names no
longer need to be specified in the "skip_certificates" field of the
automatic HTTPS config, because they will be skipped automatically.
