* fix(oras)!: remove ORAS artifact references support
ORAS artifacts/references predated OCI dist-spec 1.1.0 which now has the
same functionality and likely to see wider adoption.
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
* test: update to released official images
So that they are unlikely to be deleted.
*-rc images may be cleaned up over time.
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
---------
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
This causes the "fair" scheduler to run it too often in the detriment of other generators.
The intention was to run it every 2 hours but the measurement unit for 7200 was not specified.
Add more logs, including showing a generator name, in order to troubleshoot this kind of issues easier in the future.
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
- update cve tests
- update scrub tests
- update tests for parsing storage and loading into meta DB
- update controller tests
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
instead of reading entire files before calculating their digests
stream them by using their Reader method.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
* fix(scheduler): data race when pushing new tasks
the problem here is that scheduler can be closed in two ways:
- canceling the context given as argument to scheduler.RunScheduler()
- running scheduler.Shutdown()
because of this shutdown can trigger a data race between calling scheduler.inShutdown()
and actually pushing tasks into the pool workers
solved that by keeping a quit channel and listening on both quit channel and ctx.Done()
and closing the worker chan and scheduler afterwards.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
* refactor(scheduler): refactor into a single shutdown
before this we could stop scheduler either by closing the context
provided to RunScheduler(ctx) or by running Shutdown().
simplify things by getting rid of the external context in RunScheduler().
keep an internal context in the scheduler itself and pass it down to all tasks.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
---------
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
wait for workers to finish before exiting
should fix tests reporting they couldn't remove rootDir because it's being
written by tasks
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
- MetaDB stores the time of the last update of a repo
- During startup we check if the layout has been updated after the last recorded change in the db
- If this is the case, the repo is parsed and updated in the DB otherwise it's skipped
Signed-off-by: Laurentiu Niculae <niculae.laurentiu1@gmail.com>
- Cosign supports 2 types of signature formats:
1. Using tag -> each new signature of the same manifest is
added as a new layer of the signature manifest having that
specific tag("{alghoritm}-{digest_of_signed_manifest}.sig")
2. Using referrers -> each new signature of the same manifest is
added as a new manifest
- For adding these cosign signature to metadb, we reserved index 0 of the
list of cosign signatures for tag-based signatures. When a new tag-based
signature is added for the same manifest, the element on first position
in its list of cosign signatures(in metadb) will be updated/overwritten.
When a new cosign signature(using referrers) will be added for the same
manifest this new signature will be appended to the list of cosign
signatures.
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
Which could be imported independently. See more details:
1. "zotregistry.io/zot/pkg/test/common" - currently used as
tcommon "zotregistry.io/zot/pkg/test/common" - inside pkg/test
test "zotregistry.io/zot/pkg/test/common" - in tests
. "zotregistry.io/zot/pkg/test/common" - in tests
Decouple zb from code in test/pkg in order to keep the size small.
2. "zotregistry.io/zot/pkg/test/image-utils" - curently used as
. "zotregistry.io/zot/pkg/test/image-utils"
3. "zotregistry.io/zot/pkg/test/deprecated" - curently used as
"zotregistry.io/zot/pkg/test/deprecated"
This one will bre replaced gradually by image-utils in the future.
4. "zotregistry.io/zot/pkg/test/signature" - (cosign + notation) use as
"zotregistry.io/zot/pkg/test/signature"
5. "zotregistry.io/zot/pkg/test/auth" - (bearer + oidc) curently used as
authutils "zotregistry.io/zot/pkg/test/auth"
6. "zotregistry.io/zot/pkg/test/oci-utils" - curently used as
ociutils "zotregistry.io/zot/pkg/test/oci-utils"
Some unused functions were removed, some were replaced, and in
a few cases specific funtions were moved to the files they were used in.
Added an interface for the StoreController, this reduces the number of imports
of the entire image store, decreasing binary size for tests.
If the zb code was still coupled with pkg/test, this would have reflected in zb size.
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
no need to run dedupe/restore blobs for images being pushed or synced while
running dedupe task, they are already deduped/restored inline.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
- implement scrub also for S3 storage by replacing umoci
- change scrub implementation for ImageIndex
- take the `Subject` into consideration when running scrub
- remove test code relying on the umoci library. Since we started
relying on images in test/data, and we create our own images using
go code we can obtain digests by other means. (cherry picked from commit 489d4e2d23c1b4e48799283f8281024bbef6123f)
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
fix(gc): fix cleaning deduped blobs because they have the modTime of
the original blobs, fixed by updating the modTime when hard linking
the blobs.
fix(gc): failing to parse rootDir at zot startup when using s3 storage
because there are no files under rootDir and we can not create empty dirs
on s3, fixed by creating an empty file under rootDir.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
now gc stress on s3 storage is using minio for ci/cd builds
gc stress on s3 storage is using localstack for nightly builds
fixed(gc): make sure we don't remove repo if there are blobs
being uploaded or the number of blobs gc'ed is not 0
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
without removing its index.json reference
fix that by also reporting if manifests with unknown mediatypes
are referenced in index.json
this will make gc delete manifest blobs with deleteImageManifest() method
instead of deleteBlob(), which also removes index.json entries.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
unified both local and s3 ImageStore logic into a single ImageStore
added a new driver interface for common file/dirs manipulations
to be implemented by different storage types
refactor(gc): drop umoci dependency, implemented internal gc
added retentionDelay config option that specifies
the garbage collect delay for images without tags
this will also clean manifests which are part of an index image
(multiarch) that no longer exist.
fix(dedupe): skip blobs under .sync/ directory
if startup dedupe is running while also syncing is running
ignore blobs under sync's temporary storage
fix(storage): do not allow image indexes modifications
when deleting a manifest verify that it is not part of a multiarch image
and throw a MethodNotAllowed error to the client if it is.
we don't want to modify multiarch images
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
- the size of the binary-minimal becomes 32MB
- "signatures" package is renamed into "imagetrust" and moved under extensions
- if the binary is not built using "imagetrust" tag then the signatures verification will
not be performed
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
* fix: remove inline GC and set a default value of gc interval
- remove inline GC
- add a default value of GC interval
- run the GC periodically by default with the default value if no interval provided
- generate GC tasks with a random delay(0-30s) between
- add IsReady() method to scheduler.TaskGenerator interface
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
* ci: add test for gc with short interval
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
---------
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
https://github.com/project-zot/zot/issues/1591
- I will rename "IMAGE NAME" to "REPOSITORY" in order to make the header easier to parse
- The order of the images cannot be predicted if zot is getting them 1 by 1 using the REST API for manifests, so they cannot be sorted when printed. We could wait on all calls to return but that may take minutes, and printing partial results as they become available is better.
- The order of the images can be predicted when relying on the zot specific search API, but that is not available in all zot servers depending on build options. I added sorting ascending by default. We are planning to implement configurable sorting in a separate PR - see the work under https://github.com/project-zot/zot/pull/1577
- With regards to the column widths/alignments that was discussed before, and the issue is we don't know the values beforehand for the REST API based responses. As mentioned above printing partial results as they become available is better.
- The column widths/alignments are partially fixed in this PR for the search API, but we should properly fix this in - see https://github.com/project-zot/zot/pull/851https://github.com/project-zot/zot/issues/1592
- Fix missing space after help message
https://github.com/project-zot/zot/issues/1598
- Fix table headers showing for json/yaml format
- Fix spacing shown with json format, use 1 row per shown entry in order to be compatible with json lines format: https://jsonlines.org/
- Add document header `---` to every image shown in yaml format to separate the entries
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
dist-spec APIs independently allow deletion of blobs and manifests.
Doing the former when in use by an image manifest or index is simply
error-prone. So disallow it.
Fixes issue #1509
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
Co-authored-by: Ramkumar Chinchani <rchincha@cisco.com>
We use locks to protect OCI layouts. However, our critical sections have
too long and cover code instead of data.
Fixes issue #1595
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
