* fix(oras)!: remove ORAS artifact references support
ORAS artifacts/references predated OCI dist-spec 1.1.0 which now has the
same functionality and likely to see wider adoption.
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
* test: update to released official images
So that they are unlikely to be deleted.
*-rc images may be cleaned up over time.
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
---------
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
* fix(scheduler): data race when pushing new tasks
the problem here is that scheduler can be closed in two ways:
- canceling the context given as argument to scheduler.RunScheduler()
- running scheduler.Shutdown()
because of this shutdown can trigger a data race between calling scheduler.inShutdown()
and actually pushing tasks into the pool workers
solved that by keeping a quit channel and listening on both quit channel and ctx.Done()
and closing the worker chan and scheduler afterwards.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
* refactor(scheduler): refactor into a single shutdown
before this we could stop scheduler either by closing the context
provided to RunScheduler(ctx) or by running Shutdown().
simplify things by getting rid of the external context in RunScheduler().
keep an internal context in the scheduler itself and pass it down to all tasks.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
---------
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
wait for workers to finish before exiting
should fix tests reporting they couldn't remove rootDir because it's being
written by tasks
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
- MetaDB stores the time of the last update of a repo
- During startup we check if the layout has been updated after the last recorded change in the db
- If this is the case, the repo is parsed and updated in the DB otherwise it's skipped
Signed-off-by: Laurentiu Niculae <niculae.laurentiu1@gmail.com>
- Cosign supports 2 types of signature formats:
1. Using tag -> each new signature of the same manifest is
added as a new layer of the signature manifest having that
specific tag("{alghoritm}-{digest_of_signed_manifest}.sig")
2. Using referrers -> each new signature of the same manifest is
added as a new manifest
- For adding these cosign signature to metadb, we reserved index 0 of the
list of cosign signatures for tag-based signatures. When a new tag-based
signature is added for the same manifest, the element on first position
in its list of cosign signatures(in metadb) will be updated/overwritten.
When a new cosign signature(using referrers) will be added for the same
manifest this new signature will be appended to the list of cosign
signatures.
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
Which could be imported independently. See more details:
1. "zotregistry.io/zot/pkg/test/common" - currently used as
tcommon "zotregistry.io/zot/pkg/test/common" - inside pkg/test
test "zotregistry.io/zot/pkg/test/common" - in tests
. "zotregistry.io/zot/pkg/test/common" - in tests
Decouple zb from code in test/pkg in order to keep the size small.
2. "zotregistry.io/zot/pkg/test/image-utils" - curently used as
. "zotregistry.io/zot/pkg/test/image-utils"
3. "zotregistry.io/zot/pkg/test/deprecated" - curently used as
"zotregistry.io/zot/pkg/test/deprecated"
This one will bre replaced gradually by image-utils in the future.
4. "zotregistry.io/zot/pkg/test/signature" - (cosign + notation) use as
"zotregistry.io/zot/pkg/test/signature"
5. "zotregistry.io/zot/pkg/test/auth" - (bearer + oidc) curently used as
authutils "zotregistry.io/zot/pkg/test/auth"
6. "zotregistry.io/zot/pkg/test/oci-utils" - curently used as
ociutils "zotregistry.io/zot/pkg/test/oci-utils"
Some unused functions were removed, some were replaced, and in
a few cases specific funtions were moved to the files they were used in.
Added an interface for the StoreController, this reduces the number of imports
of the entire image store, decreasing binary size for tests.
If the zb code was still coupled with pkg/test, this would have reflected in zb size.
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
no need to run dedupe/restore blobs for images being pushed or synced while
running dedupe task, they are already deduped/restored inline.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
fix(gc): fix cleaning deduped blobs because they have the modTime of
the original blobs, fixed by updating the modTime when hard linking
the blobs.
fix(gc): failing to parse rootDir at zot startup when using s3 storage
because there are no files under rootDir and we can not create empty dirs
on s3, fixed by creating an empty file under rootDir.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
without removing its index.json reference
fix that by also reporting if manifests with unknown mediatypes
are referenced in index.json
this will make gc delete manifest blobs with deleteImageManifest() method
instead of deleteBlob(), which also removes index.json entries.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
unified both local and s3 ImageStore logic into a single ImageStore
added a new driver interface for common file/dirs manipulations
to be implemented by different storage types
refactor(gc): drop umoci dependency, implemented internal gc
added retentionDelay config option that specifies
the garbage collect delay for images without tags
this will also clean manifests which are part of an index image
(multiarch) that no longer exist.
fix(dedupe): skip blobs under .sync/ directory
if startup dedupe is running while also syncing is running
ignore blobs under sync's temporary storage
fix(storage): do not allow image indexes modifications
when deleting a manifest verify that it is not part of a multiarch image
and throw a MethodNotAllowed error to the client if it is.
we don't want to modify multiarch images
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
- the size of the binary-minimal becomes 32MB
- "signatures" package is renamed into "imagetrust" and moved under extensions
- if the binary is not built using "imagetrust" tag then the signatures verification will
not be performed
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
* fix: remove inline GC and set a default value of gc interval
- remove inline GC
- add a default value of GC interval
- run the GC periodically by default with the default value if no interval provided
- generate GC tasks with a random delay(0-30s) between
- add IsReady() method to scheduler.TaskGenerator interface
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
* ci: add test for gc with short interval
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
---------
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
dist-spec APIs independently allow deletion of blobs and manifests.
Doing the former when in use by an image manifest or index is simply
error-prone. So disallow it.
Fixes issue #1509
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
Co-authored-by: Ramkumar Chinchani <rchincha@cisco.com>
We use locks to protect OCI layouts. However, our critical sections have
too long and cover code instead of data.
Fixes issue #1595
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
when pushing manifests, zot will validate blobs (layers + config blob) are
present in repo, currently it opens(in case of filesystem storage) or download(
in case of cloud storage) each blob.
fixed that by adding a new method ImageStore.CheckBlobPresence() on storage
to check blobs presence without checking the cache like ImageStore.CheckBlob() method does.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
* fix: missing Oci-Subject header pushing index with subject
Signed-off-by: Josh Dolitsky <josh@dolit.ski>
* fix(s3): Add a test to cover handling pushing indexes with a subject
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
---------
Signed-off-by: Josh Dolitsky <josh@dolit.ski>
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
Co-authored-by: Andrei Aaron <aaaron@luxoft.com>
fix(storage/local): also put deduped blobs in cache, not just origin blobs
this caused an error when trying to delete deduped blobs
from multiple repositories
fix(storage/s3): check blob is present in cache before deleting
this is an edge case where dedupe is false but cacheDriver is not nil
(because in s3 we open the cache.db if storage find it in rootDir)
it caused an error when trying to delete blobs uploaded with dedupe false
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
1. chore(trivy): update trivy library version
The trivy team switched github.com/urfave/cli for viper so
there are some other code changes as well.
Since we don't use github.com/urfave/cli directly in our software
we needed to add a tools.go in order for "go mod tidy" to not delete it.
See this pattern explained in:
- https://github.com/99designs/gqlgen#quick-start
- https://github.com/golang/go/wiki/Modules#how-can-i-track-tool-dependencies-for-a-module
- https://github.com/go-modules-by-example/index/blob/master/010_tools/README.md#walk-through
The jobs using "go get -u" have been updated to use "go install", since go get
modifies the go.mod by upgrading some of the packages, but downgrading trivy to an older
version with broken dependencies
2. fix(storage) Update local storage to ignore folder names not compliant with dist spec
Also updated trivy to download the DB and cache results under the rootDir/_trivy folder
3. fix(s3): one of the s3 tests was missing the skipIt call
This caused a failure when running locally without s3 being available
4. make sure the offline scanning is enabled, and zot only downloads the trivy DB
on the regular schedule, and doesn't download the DB on every image scan
ci: increase build and test timeout as tests are reaching the limit more often
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>