* feat: add support for docker images
Issue #724
A new config section under "HTTP" called "Compat" is added which
currently takes a list of possible compatible legacy media-types.
https://github.com/opencontainers/image-spec/blob/main/media-types.md#compatibility-matrix
Only "docker2s2" (Docker Manifest V2 Schema V2) is currently supported.
Garbage collection also needs to be made aware of non-OCI compatible
layer types.
feat: add cve support for non-OCI compatible layer types
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
*
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
* test: add more docker compat tests
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
* feat: add additional validation checks for non-OCI images
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
* ci: make "full" images docker-compatible
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
---------
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
when a client pushes an image zot's inline dedupe
will try to find the blob path corresponding with the blob digest
that it's currently pushed and if it's found in the cache
then zot will make a symbolic link to that cache entry and report
to the client that the blob already exists on the location.
Before this patch authorization was not applied on this process meaning
that a user could copy blobs without having permissions on the source repo.
Added a rule which says that the client should have read permissions on the source repo
before deduping, otherwise just Stat() the blob and return the corresponding status code.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
Co-authored-by: Petu Eusebiu <peusebiu@cisco.com>
* fix(oras)!: remove ORAS artifact references support
ORAS artifacts/references predated OCI dist-spec 1.1.0 which now has the
same functionality and likely to see wider adoption.
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
* test: update to released official images
So that they are unlikely to be deleted.
*-rc images may be cleaned up over time.
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
---------
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
- update cve tests
- update scrub tests
- update tests for parsing storage and loading into meta DB
- update controller tests
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
instead of reading entire files before calculating their digests
stream them by using their Reader method.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
wait for workers to finish before exiting
should fix tests reporting they couldn't remove rootDir because it's being
written by tasks
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
Which could be imported independently. See more details:
1. "zotregistry.io/zot/pkg/test/common" - currently used as
tcommon "zotregistry.io/zot/pkg/test/common" - inside pkg/test
test "zotregistry.io/zot/pkg/test/common" - in tests
. "zotregistry.io/zot/pkg/test/common" - in tests
Decouple zb from code in test/pkg in order to keep the size small.
2. "zotregistry.io/zot/pkg/test/image-utils" - curently used as
. "zotregistry.io/zot/pkg/test/image-utils"
3. "zotregistry.io/zot/pkg/test/deprecated" - curently used as
"zotregistry.io/zot/pkg/test/deprecated"
This one will bre replaced gradually by image-utils in the future.
4. "zotregistry.io/zot/pkg/test/signature" - (cosign + notation) use as
"zotregistry.io/zot/pkg/test/signature"
5. "zotregistry.io/zot/pkg/test/auth" - (bearer + oidc) curently used as
authutils "zotregistry.io/zot/pkg/test/auth"
6. "zotregistry.io/zot/pkg/test/oci-utils" - curently used as
ociutils "zotregistry.io/zot/pkg/test/oci-utils"
Some unused functions were removed, some were replaced, and in
a few cases specific funtions were moved to the files they were used in.
Added an interface for the StoreController, this reduces the number of imports
of the entire image store, decreasing binary size for tests.
If the zb code was still coupled with pkg/test, this would have reflected in zb size.
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
fix(gc): fix cleaning deduped blobs because they have the modTime of
the original blobs, fixed by updating the modTime when hard linking
the blobs.
fix(gc): failing to parse rootDir at zot startup when using s3 storage
because there are no files under rootDir and we can not create empty dirs
on s3, fixed by creating an empty file under rootDir.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
without removing its index.json reference
fix that by also reporting if manifests with unknown mediatypes
are referenced in index.json
this will make gc delete manifest blobs with deleteImageManifest() method
instead of deleteBlob(), which also removes index.json entries.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
unified both local and s3 ImageStore logic into a single ImageStore
added a new driver interface for common file/dirs manipulations
to be implemented by different storage types
refactor(gc): drop umoci dependency, implemented internal gc
added retentionDelay config option that specifies
the garbage collect delay for images without tags
this will also clean manifests which are part of an index image
(multiarch) that no longer exist.
fix(dedupe): skip blobs under .sync/ directory
if startup dedupe is running while also syncing is running
ignore blobs under sync's temporary storage
fix(storage): do not allow image indexes modifications
when deleting a manifest verify that it is not part of a multiarch image
and throw a MethodNotAllowed error to the client if it is.
we don't want to modify multiarch images
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
dist-spec APIs independently allow deletion of blobs and manifests.
Doing the former when in use by an image manifest or index is simply
error-prone. So disallow it.
Fixes issue #1509
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
Co-authored-by: Ramkumar Chinchani <rchincha@cisco.com>
when pushing manifests, zot will validate blobs (layers + config blob) are
present in repo, currently it opens(in case of filesystem storage) or download(
in case of cloud storage) each blob.
fixed that by adding a new method ImageStore.CheckBlobPresence() on storage
to check blobs presence without checking the cache like ImageStore.CheckBlob() method does.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
Suppose we push two identical manifests (sharing same digest) but with
different tags, then deleting by digest should throw an error otherwise
we end up deleting all image tags (with gc) or dangling references
(without gc)
This behaviour is controlled via Authorization, added a new policy
action named detectManifestsCollision which enables this behaviour
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
Co-authored-by: Ramkumar Chinchani <rchincha@cisco.com>
Moved boltdb to a driver implementation for such interface
Added CreateCacheDatabaseDriver in controller
Fixed default directory creation (boltDB will only create the file, not the dir
Added coverage tests
Added example config for boltdb
Re-added caching on subpaths, rewrote CreateCacheDatabaseDriver
Fix tests
Made cacheDriver argument mandatory for NewImageStore, added more validation, added defaults
Moved cache interface to own file, removed useRelPaths from config
Got rid of cache config, refactored
Moved cache to own package and folder
Renamed + removed cache factory to backend, replaced CloudCache to RemoteCache
Moved storage constants back to storage package
moved cache interface and factory to storage package, changed remoteCache defaulting
Signed-off-by: Catalin Hofnar <catalin.hofnar@gmail.com>
- Digests were represented by different ways
- We needed a uniform way to represent the digests and enforce a format
- also replace usage of github.com/google/go-containerregistry/pkg/v1
with github.com/opencontainers/image-spec/specs-go/v1
Signed-off-by: Laurentiu Niculae <niculae.laurentiu1@gmail.com>
(cherry picked from commit 96b2f29d6d57070a913ce419149cd481c0723815)
(cherry picked from commit 3d41b583daea654c98378ce3dcb78937d71538e8)
Co-authored-by: Laurentiu Niculae <niculae.laurentiu1@gmail.com>
This commit uses native go fuzzing to fuzz test implementations
of storage in storage_fs.
moved fuzzing testdata for storage_fs in separate repo
added make target and script for importing fuzz data and running all fuzz tests
Signed-off-by: Alex Stan <alexandrustan96@yahoo.ro>
Because s3 doesn't support hard links we store duplicated blobs
as empty files. When the original blob is deleted its content is
moved to the the next duplicated blob and so on.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
PR (linter: upgrade linter version #405) triggered lint job which failed
with many errors generated by various linters. Configurations were added to
golangcilint.yaml and several refactorings were made in order to improve the
results of the linter.
maintidx linter disabled
Signed-off-by: Alex Stan <alexandrustan96@yahoo.ro>
The directory created by `T.TempDir` is automatically removed when the
test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Behavior controlled by configuration (default=off)
It is a trade-off between performance and consistency.
References:
[1] https://github.com/golang/go/issues/20599
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
