* chore: use go1.23 in the build environment of zot container images
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
* chore: increase timeout in test/blackbox/restore_s3_blobs.bats
Looks like the message is actually there even if the test fails, maybe there is a timing issue.
https://github.com/project-zot/zot/actions/runs/11747889146/job/32730772641
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
---------
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
* feat: add support for docker images
Issue #724
A new config section under "HTTP" called "Compat" is added which
currently takes a list of possible compatible legacy media-types.
https://github.com/opencontainers/image-spec/blob/main/media-types.md#compatibility-matrix
Only "docker2s2" (Docker Manifest V2 Schema V2) is currently supported.
Garbage collection also needs to be made aware of non-OCI compatible
layer types.
feat: add cve support for non-OCI compatible layer types
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
*
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
* test: add more docker compat tests
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
* feat: add additional validation checks for non-OCI images
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
* ci: make "full" images docker-compatible
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
---------
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
chore: upgrade trivy to v0.55.2, also update the logic of waiting for zot to start in some jobs
Seems like there's an increate in the time zot requires to start before servicing requests.
From my GitHub observations it is better check using curl instead of relying on hardcoded 5s or 10s values.
The logic in .github/workflows/cluster.yaml seems to be old and out of date.
Even on main right now there is only 1 our of 3 zots actualy running.
The other 2 are actually erroring: Error: operation timeout: boltdb file is already in use, path '/tmp/zot/cache.db'
This is unrelated to this PR, I am seeing the same issue in the olders workflow runs still showing the logs
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
* fix(oras)!: remove ORAS artifact references support
ORAS artifacts/references predated OCI dist-spec 1.1.0 which now has the
same functionality and likely to see wider adoption.
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
* test: update to released official images
So that they are unlikely to be deleted.
*-rc images may be cleaned up over time.
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
---------
Signed-off-by: Ramkumar Chinchani <rchincha@cisco.com>
BREAKING CHANGE: the dist spec version in the config files needs to be bumped to 1.1.0
in order for the config verification to pass without warnings.
Also fix 1 dependabot alert for helm.
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
If the manifest is not present, scrub no longer errors,
so the test looking for errors in the log was not failing.
See the related scrub changes in: https://github.com/project-zot/zot/pull/2180
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
Since the scheduler no longer executes generators in a fixed order, and scrub logic refactoring,
the scrub tasks may or may not complete in the expected time.
Increase sleep times used to search for tasks results in zot logs.
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
* fix(scheduler): data race when pushing new tasks
the problem here is that scheduler can be closed in two ways:
- canceling the context given as argument to scheduler.RunScheduler()
- running scheduler.Shutdown()
because of this shutdown can trigger a data race between calling scheduler.inShutdown()
and actually pushing tasks into the pool workers
solved that by keeping a quit channel and listening on both quit channel and ctx.Done()
and closing the worker chan and scheduler afterwards.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
* refactor(scheduler): refactor into a single shutdown
before this we could stop scheduler either by closing the context
provided to RunScheduler(ctx) or by running Shutdown().
simplify things by getting rid of the external context in RunScheduler().
keep an internal context in the scheduler itself and pass it down to all tasks.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
---------
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
* feat(sync): local tmp store
Signed-off-by: a <a@tuxpa.in>
* fix(sync): various fixes for s3+remote storage feature
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
---------
Signed-off-by: a <a@tuxpa.in>
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
Co-authored-by: a <a@tuxpa.in>
- Cosign supports 2 types of signature formats:
1. Using tag -> each new signature of the same manifest is
added as a new layer of the signature manifest having that
specific tag("{alghoritm}-{digest_of_signed_manifest}.sig")
2. Using referrers -> each new signature of the same manifest is
added as a new manifest
- For adding these cosign signature to metadb, we reserved index 0 of the
list of cosign signatures for tag-based signatures. When a new tag-based
signature is added for the same manifest, the element on first position
in its list of cosign signatures(in metadb) will be updated/overwritten.
When a new cosign signature(using referrers) will be added for the same
manifest this new signature will be appended to the list of cosign
signatures.
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
ci(notation): update to latest notation version
fix(sync): add layers info when syncing signatures
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
now gc stress on s3 storage is using minio for ci/cd builds
gc stress on s3 storage is using localstack for nightly builds
fixed(gc): make sure we don't remove repo if there are blobs
being uploaded or the number of blobs gc'ed is not 0
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
Also fix additional issues:
- sorting of tags on calls without pagination parameters ('n' or 'last')
- if 'n' is 0 we should return an empty list and not error
Added tests accordingly
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
New examples of running tests:
1. To run a specific bats file (with and without verbose output):
make run-blackbox-tests BATS_TEST_FILE_PATH=test/blackbox/delete_images.bats
make run-blackbox-tests BATS_TEST_FILE_PATH=test/blackbox/delete_images.bats BATS_VERBOSITY=2
2. To run the CI tests (with and without verbose output)
make run-blackbox-ci
make run-blackbox-ci BATS_VERBOSITY=2
BATS_TEST_FILE_PATH is used to pass on the test file to run using `run-blackbox-tests`
BATS_VERBOSITY controls the verbosity of the bats framework output, if unspecified the output only
contains test results and failure message in case of failures.
If BATS_VERBOSITY is 1, then also show commands as they are executed.
If BATS_VERBOSITY is 2, on top of the above it also shows output of passed tests.
Other changes in this PR:
- Update some of the tests to show logs after the run ends.
- Run the linters before the tests, as it saves time on failures when running in GH
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
fix(authz): fix isAdmin not using groups to determine if a user is admin.
fix(authz): return 401 instead of 403
403 is correct as per HTTP spec
However authz is not part of dist-spec and clients know only about 401
So this is a compromise.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
unified both local and s3 ImageStore logic into a single ImageStore
added a new driver interface for common file/dirs manipulations
to be implemented by different storage types
refactor(gc): drop umoci dependency, implemented internal gc
added retentionDelay config option that specifies
the garbage collect delay for images without tags
this will also clean manifests which are part of an index image
(multiarch) that no longer exist.
fix(dedupe): skip blobs under .sync/ directory
if startup dedupe is running while also syncing is running
ignore blobs under sync's temporary storage
fix(storage): do not allow image indexes modifications
when deleting a manifest verify that it is not part of a multiarch image
and throw a MethodNotAllowed error to the client if it is.
we don't want to modify multiarch images
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
* fix: remove inline GC and set a default value of gc interval
- remove inline GC
- add a default value of GC interval
- run the GC periodically by default with the default value if no interval provided
- generate GC tasks with a random delay(0-30s) between
- add IsReady() method to scheduler.TaskGenerator interface
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
* ci: add test for gc with short interval
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
---------
Signed-off-by: Andreea-Lupu <andreealupu1470@yahoo.com>
BREAKING CHANGE: The functionality provided by the mgmt endpoint has beed redesigned - see details below
BREAKING CHANGE: The API keys endpoint has been moved - see details below
BREAKING CHANGE: The mgmt extension config has been removed - endpoint is now enabled by having both the search and the ui extensions enabled
BREAKING CHANGE: The API keys configuration has been moved from extensions to http>auth>apikey
mgmt and imagetrust extensions:
- separate the _zot/ext/mgmt into 3 separate endpoints: _zot/ext/auth, _zot/ext/notation, _zot/ext/cosign
- signature verification logic is in a separate `imagetrust` extension
- better hanling or errors in case of signature uploads: logging and error codes (more 400 and less 500 errors)
- add authz on signature uploads (and add a new middleware in common for this purpose)
- remove the mgmt extension configuration - it is now enabled if the UI and the search extensions are enabled
userprefs estension:
- userprefs are enabled if both search and ui extensions are enabled (as opposed to just search)
apikey extension is removed and logic moved into the api folder
- Move apikeys code out of pkg/extensions and into pkg/api
- Remove apikey configuration options from the extensions configuration and move it inside the http auth section
- remove the build label apikeys
other changes:
- move most of the logic adding handlers to the extensions endpoints out of routes.go and into the extensions files.
- add warnings in case the users are still using configurations with the obsolete settings for mgmt and api keys
- add a new function in the extension package which could be a single point of starting backgroud tasks for all extensions
- more clear methods for verifying specific extensions are enabled
- fix http methods paired with the UI handlers
- rebuild swagger docs
Signed-off-by: Andrei Aaron <aaaron@luxoft.com>
sync now ignores self referencing urls, this will help
in clustering mode where we can have the same config
for multiple zots
closes#1335
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
This change introduces OpenID authn by using providers such as Github,
Gitlab, Google and Dex.
User sessions are now used for web clients to identify
and persist an authenticated users session, thus not requiring every request to
use credentials.
Another change is apikey feature, users can create/revoke their api keys and use them
to authenticate when using cli clients such as skopeo.
eg:
login:
/auth/login?provider=github
/auth/login?provider=gitlab
and so on
logout:
/auth/logout
redirectURL:
/auth/callback/github
/auth/callback/gitlab
and so on
If network policy doesn't allow inbound connections, this callback wont work!
for more info read documentation added in this commit.
Signed-off-by: Alex Stan <alexandrustan96@yahoo.ro>
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
Co-authored-by: Alex Stan <alexandrustan96@yahoo.ro>
before syncing an image we first check if it's already present in our storage
to do that we get the manifest from remote and compare it with the local one
but in the case of syncing docker images, because the conversion to OCI format is done while
syncing, we get a docker manifest before conversion, so sync detects that local manifest and
remote one are different, so it starts syncing again.
to overcome this, convert remote docker manifests to OCI manifests and then compare.
Signed-off-by: Petu Eusebiu <peusebiu@cisco.com>
