imageproxy/data.go

// Copyright 2013 Google Inc. All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package imageproxy

import (
	"bytes"
	"fmt"
	"net/http"
	"net/url"
	"strconv"
	"strings"
)

const (
	optFit            = "fit"
	optFlipVertical   = "fv"
	optFlipHorizontal = "fh"
	optRotatePrefix   = "r"
	optQualityPrefix  = "q"
	optSizeDelimiter  = "x"
)

// URLError reports a malformed URL error.
type URLError struct {
	Message string
	URL     *url.URL
}

func (e URLError) Error() string {
	return fmt.Sprintf("malformed URL %q: %s", e.URL, e.Message)
}

// Options specifies transformations to be performed on the requested image.
type Options struct {
	// See ParseOptions for interpretation of Width and Height values
	Width  float64
	Height float64

	// If true, resize the image to fit in the specified dimensions.  Image
	// will not be cropped, and aspect ratio will be maintained.
	Fit bool

	// Rotate image the specified degrees counter-clockwise.  Valid values
	// are 90, 180, 270.
	Rotate int

	FlipVertical   bool
	FlipHorizontal bool

	// Quality of output image
	Quality int
}

var emptyOptions = Options{}

func (o Options) String() string {
	buf := new(bytes.Buffer)
	fmt.Fprintf(buf, "%v%s%v", o.Width, optSizeDelimiter, o.Height)
	if o.Fit {
		fmt.Fprintf(buf, ",%s", optFit)
	}
	if o.Rotate != 0 {
		fmt.Fprintf(buf, ",%s%d", string(optRotatePrefix), o.Rotate)
	}
	if o.FlipVertical {
		fmt.Fprintf(buf, ",%s", optFlipVertical)
	}
	if o.FlipHorizontal {
		fmt.Fprintf(buf, ",%s", optFlipHorizontal)
	}
	fmt.Fprintf(buf, ",%s%d", string(optQualityPrefix), o.Quality)
	return buf.String()
}

// ParseOptions parses str as a list of comma separated transformation options.
// The following options can be specified in any order:
//
// Size and Cropping
//
// The size option takes the general form "{width}x{height}", where width and
// height are numbers. Integer values greater than 1 are interpreted as exact
// pixel values. Floats between 0 and 1 are interpreted as percentages of the
// original image size. If either value is omitted or set to 0, it will be
// automatically set to preserve the aspect ratio based on the other dimension.
// If a single number is provided (with no "x" separator), it will be used for
// both height and width.
//
// Depending on the size options specified, an image may be cropped to fit the
// requested size. In all cases, the original aspect ratio of the image will be
// preserved; imageproxy will never stretch the original image.
//
// When no explicit crop mode is specified, the following rules are followed:
//
// - If both width and height values are specified, the image will be scaled to
// fill the space, cropping if necessary to fit the exact dimension.
//
// - If only one of the width or height values is specified, the image will be
// resized to fit the specified dimension, scaling the other dimension as
// needed to maintain the aspect ratio.
//
// If the "fit" option is specified together with a width and height value, the
// image will be resized to fit within a containing box of the specified size.
// As always, the original aspect ratio will be preserved. Specifying the "fit"
// option with only one of either width or height does the same thing as if
// "fit" had not been specified.
//
// Rotation and Flips
//
// The "r{degrees}" option will rotate the image the specified number of
// degrees, counter-clockwise. Valid degrees values are 90, 180, and 270.
//
// The "fv" option will flip the image vertically. The "fh" option will flip
// the image horizontally. Images are flipped after being rotated.
//
// Quality
//
// The "q{qualityPercentage}" option can be used to specify the quality of the
// output file (JPEG only)
//
// Examples
//
// 	0x0       - no resizing
// 	200x      - 200 pixels wide, proportional height
// 	0.15x     - 15% original width, proportional height
// 	x100      - 100 pixels tall, proportional width
// 	100x150   - 100 by 150 pixels, cropping as needed
// 	100       - 100 pixels square, cropping as needed
// 	150,fit   - scale to fit 150 pixels square, no cropping
// 	100,r90   - 100 pixels square, rotated 90 degrees
// 	100,fv,fh - 100 pixels square, flipped horizontal and vertical
// 	200x,q80  - 200 pixels wide, proportional height, 80% quality
func ParseOptions(str string) Options {
	options := Options{}

	for _, opt := range strings.Split(str, ",") {
		switch {
		case len(opt) == 0:
			break
		case opt == optFit:
			options.Fit = true
		case opt == optFlipVertical:
			options.FlipVertical = true
		case opt == optFlipHorizontal:
			options.FlipHorizontal = true
		case strings.HasPrefix(opt, optRotatePrefix):
			value := strings.TrimPrefix(opt, optRotatePrefix)
			options.Rotate, _ = strconv.Atoi(value)
		case strings.HasPrefix(opt, optQualityPrefix):
			value := strings.TrimPrefix(opt, optQualityPrefix)
			options.Quality, _ = strconv.Atoi(value)
		case strings.Contains(opt, optSizeDelimiter):
			size := strings.SplitN(opt, optSizeDelimiter, 2)
			if w := size[0]; w != "" {
				options.Width, _ = strconv.ParseFloat(w, 64)
			}
			if h := size[1]; h != "" {
				options.Height, _ = strconv.ParseFloat(h, 64)
			}
		default:
			if size, err := strconv.ParseFloat(opt, 64); err == nil {
				options.Width = size
				options.Height = size
			}
		}
	}

	return options
}

// Request is an imageproxy request which includes a remote URL of an image to
// proxy, and an optional set of transformations to perform.
type Request struct {
	URL     *url.URL // URL of the image to proxy
	Options Options  // Image transformation to perform
}

// NewRequest parses an http.Request into an imageproxy Request.  Options and
// the remote image URL are specified in the request path, formatted as:
// /{options}/{remote_url}.  Options may be omitted, so a request path may
// simply contian /{remote_url}.  The remote URL must be an absolute "http" or
// "https" URL, should not be URL encoded, and may contain a query string.
//
// Assuming an imageproxy server running on localhost, the following are all
// valid imageproxy requests:
//
// 	http://localhost/100x200/http://example.com/image.jpg
// 	http://localhost/100x200,r90/http://example.com/image.jpg?foo=bar
// 	http://localhost//http://example.com/image.jpg
// 	http://localhost/http://example.com/image.jpg
func NewRequest(r *http.Request, baseURL *url.URL) (*Request, error) {
	var err error
	req := new(Request)

	path := r.URL.Path[1:] // strip leading slash
	req.URL, err = url.Parse(path)
	if err != nil || !req.URL.IsAbs() {
		// first segment should be options
		parts := strings.SplitN(path, "/", 2)
		if len(parts) != 2 {
			return nil, URLError{"too few path segments", r.URL}
		}

		req.URL, err = url.Parse(parts[1])
		if err != nil {
			return nil, URLError{fmt.Sprintf("unable to parse remote URL: %v", err), r.URL}
		}

		req.Options = ParseOptions(parts[0])
	}

	if baseURL != nil {
		req.URL = baseURL.ResolveReference(req.URL)
	}

	if !req.URL.IsAbs() {
		return nil, URLError{"must provide absolute remote URL", r.URL}
	}

	if req.URL.Scheme != "http" && req.URL.Scheme != "https" {
		return nil, URLError{"remote URL must have http or https scheme", r.URL}
	}

	// query string is always part of the remote URL
	req.URL.RawQuery = r.URL.RawQuery
	return req, nil
}