1
Fork 0
mirror of https://github.com/caddyserver/caddy.git synced 2024-12-16 21:56:40 -05:00
caddy/modules/caddyhttp/reverseproxy/reverseproxy.go

812 lines
27 KiB
Go

// Copyright 2015 Matthew Holt and The Caddy Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package reverseproxy
import (
"bytes"
"context"
"encoding/json"
"fmt"
"io"
"io/ioutil"
"net"
"net/http"
"regexp"
"strings"
"sync"
"time"
"github.com/caddyserver/caddy/v2"
"github.com/caddyserver/caddy/v2/modules/caddyhttp"
"github.com/caddyserver/caddy/v2/modules/caddyhttp/headers"
"go.uber.org/zap"
"golang.org/x/net/http/httpguts"
)
func init() {
caddy.RegisterModule(Handler{})
}
// Handler implements a highly configurable and production-ready reverse proxy.
//
// Upon proxying, this module sets the following placeholders (which can be used
// both within and after this handler):
//
// Placeholder | Description
// ------------|-------------
// `{http.reverse_proxy.upstream.address}` | The full address to the upstream as given in the config
// `{http.reverse_proxy.upstream.hostport}` | The host:port of the upstream
// `{http.reverse_proxy.upstream.host}` | The host of the upstream
// `{http.reverse_proxy.upstream.port}` | The port of the upstream
// `{http.reverse_proxy.upstream.requests}` | The approximate current number of requests to the upstream
// `{http.reverse_proxy.upstream.max_requests}` | The maximum approximate number of requests allowed to the upstream
// `{http.reverse_proxy.upstream.fails}` | The number of recent failed requests to the upstream
type Handler struct {
// Configures the method of transport for the proxy. A transport
// is what performs the actual "round trip" to the backend.
// The default transport is plaintext HTTP.
TransportRaw json.RawMessage `json:"transport,omitempty" caddy:"namespace=http.reverse_proxy.transport inline_key=protocol"`
// A circuit breaker may be used to relieve pressure on a backend
// that is beginning to exhibit symptoms of stress or latency.
// By default, there is no circuit breaker.
CBRaw json.RawMessage `json:"circuit_breaker,omitempty" caddy:"namespace=http.reverse_proxy.circuit_breakers inline_key=type"`
// Load balancing distributes load/requests between backends.
LoadBalancing *LoadBalancing `json:"load_balancing,omitempty"`
// Health checks update the status of backends, whether they are
// up or down. Down backends will not be proxied to.
HealthChecks *HealthChecks `json:"health_checks,omitempty"`
// Upstreams is the list of backends to proxy to.
Upstreams UpstreamPool `json:"upstreams,omitempty"`
// Adjusts how often to flush the response buffer. A
// negative value disables response buffering.
// TODO: figure out good defaults and write docs for this
// (see https://github.com/caddyserver/caddy/issues/1460)
FlushInterval caddy.Duration `json:"flush_interval,omitempty"`
// Headers manipulates headers between Caddy and the backend.
// By default, all headers are passed-thru without changes,
// with the exceptions of special hop-by-hop headers.
//
// X-Forwarded-For and X-Forwarded-Proto are also set
// implicitly, but this may change in the future if the official
// standardized Forwarded header field gains more adoption.
Headers *headers.Handler `json:"headers,omitempty"`
// If true, the entire request body will be read and buffered
// in memory before being proxied to the backend. This should
// be avoided if at all possible for performance reasons.
BufferRequests bool `json:"buffer_requests,omitempty"`
// List of handlers and their associated matchers to evaluate
// after successful roundtrips. The first handler that matches
// the response from a backend will be invoked. The response
// body from the backend will not be written to the client;
// it is up to the handler to finish handling the response.
// If passive health checks are enabled, any errors from the
// handler chain will not affect the health status of the
// backend.
//
// Two new placeholders are available in this handler chain:
// - `{http.reverse_proxy.status_code}` The status code
// - `{http.reverse_proxy.status_text}` The status text
HandleResponse []caddyhttp.ResponseHandler `json:"handle_response,omitempty"`
Transport http.RoundTripper `json:"-"`
CB CircuitBreaker `json:"-"`
logger *zap.Logger
}
// CaddyModule returns the Caddy module information.
func (Handler) CaddyModule() caddy.ModuleInfo {
return caddy.ModuleInfo{
ID: "http.handlers.reverse_proxy",
New: func() caddy.Module { return new(Handler) },
}
}
// Provision ensures that h is set up properly before use.
func (h *Handler) Provision(ctx caddy.Context) error {
h.logger = ctx.Logger(h)
// start by loading modules
if h.TransportRaw != nil {
mod, err := ctx.LoadModule(h, "TransportRaw")
if err != nil {
return fmt.Errorf("loading transport: %v", err)
}
h.Transport = mod.(http.RoundTripper)
}
if h.LoadBalancing != nil && h.LoadBalancing.SelectionPolicyRaw != nil {
mod, err := ctx.LoadModule(h.LoadBalancing, "SelectionPolicyRaw")
if err != nil {
return fmt.Errorf("loading load balancing selection policy: %s", err)
}
h.LoadBalancing.SelectionPolicy = mod.(Selector)
}
if h.CBRaw != nil {
mod, err := ctx.LoadModule(h, "CBRaw")
if err != nil {
return fmt.Errorf("loading circuit breaker: %s", err)
}
h.CB = mod.(CircuitBreaker)
}
// ensure any embedded headers handler module gets provisioned
// (see https://caddy.community/t/set-cookie-manipulation-in-reverse-proxy/7666?u=matt
// for what happens if we forget to provision it)
if h.Headers != nil {
err := h.Headers.Provision(ctx)
if err != nil {
return fmt.Errorf("provisioning embedded headers handler: %v", err)
}
}
// set up transport
if h.Transport == nil {
t := &HTTPTransport{
KeepAlive: &KeepAlive{
ProbeInterval: caddy.Duration(30 * time.Second),
IdleConnTimeout: caddy.Duration(2 * time.Minute),
MaxIdleConnsPerHost: 32,
},
DialTimeout: caddy.Duration(10 * time.Second),
}
err := t.Provision(ctx)
if err != nil {
return fmt.Errorf("provisioning default transport: %v", err)
}
h.Transport = t
}
// set up load balancing
if h.LoadBalancing == nil {
h.LoadBalancing = new(LoadBalancing)
}
if h.LoadBalancing.SelectionPolicy == nil {
h.LoadBalancing.SelectionPolicy = RandomSelection{}
}
if h.LoadBalancing.TryDuration > 0 && h.LoadBalancing.TryInterval == 0 {
// a non-zero try_duration with a zero try_interval
// will always spin the CPU for try_duration if the
// upstream is local or low-latency; avoid that by
// defaulting to a sane wait period between attempts
h.LoadBalancing.TryInterval = caddy.Duration(250 * time.Millisecond)
}
lbMatcherSets, err := ctx.LoadModule(h.LoadBalancing, "RetryMatchRaw")
if err != nil {
return err
}
err = h.LoadBalancing.RetryMatch.FromInterface(lbMatcherSets)
if err != nil {
return err
}
// set up upstreams
for _, upstream := range h.Upstreams {
// create or get the host representation for this upstream
var host Host = new(upstreamHost)
existingHost, loaded := hosts.LoadOrStore(upstream.String(), host)
if loaded {
host = existingHost.(Host)
}
upstream.Host = host
// give it the circuit breaker, if any
upstream.cb = h.CB
// if the passive health checker has a non-zero UnhealthyRequestCount
// but the upstream has no MaxRequests set (they are the same thing,
// but the passive health checker is a default value for for upstreams
// without MaxRequests), copy the value into this upstream, since the
// value in the upstream (MaxRequests) is what is used during
// availability checks
if h.HealthChecks != nil && h.HealthChecks.Passive != nil {
h.HealthChecks.Passive.logger = h.logger.Named("health_checker.passive")
if h.HealthChecks.Passive.UnhealthyRequestCount > 0 &&
upstream.MaxRequests == 0 {
upstream.MaxRequests = h.HealthChecks.Passive.UnhealthyRequestCount
}
}
// upstreams need independent access to the passive
// health check policy because passive health checks
// run without access to h.
if h.HealthChecks != nil {
upstream.healthCheckPolicy = h.HealthChecks.Passive
}
}
// if active health checks are enabled, configure them and start a worker
if h.HealthChecks != nil &&
h.HealthChecks.Active != nil &&
(h.HealthChecks.Active.Path != "" || h.HealthChecks.Active.Port != 0) {
h.HealthChecks.Active.logger = h.logger.Named("health_checker.active")
timeout := time.Duration(h.HealthChecks.Active.Timeout)
if timeout == 0 {
timeout = 5 * time.Second
}
h.HealthChecks.Active.stopChan = make(chan struct{})
h.HealthChecks.Active.httpClient = &http.Client{
Timeout: timeout,
Transport: h.Transport,
}
if h.HealthChecks.Active.Interval == 0 {
h.HealthChecks.Active.Interval = caddy.Duration(30 * time.Second)
}
if h.HealthChecks.Active.ExpectBody != "" {
var err error
h.HealthChecks.Active.bodyRegexp, err = regexp.Compile(h.HealthChecks.Active.ExpectBody)
if err != nil {
return fmt.Errorf("expect_body: compiling regular expression: %v", err)
}
}
go h.activeHealthChecker()
}
// set up any response routes
for i, rh := range h.HandleResponse {
err := rh.Provision(ctx)
if err != nil {
return fmt.Errorf("provisioning response handler %d: %v", i, err)
}
}
return nil
}
// Cleanup cleans up the resources made by h during provisioning.
func (h *Handler) Cleanup() error {
// stop the active health checker
if h.HealthChecks != nil &&
h.HealthChecks.Active != nil &&
h.HealthChecks.Active.stopChan != nil {
// TODO: consider using context cancellation, could be much simpler
close(h.HealthChecks.Active.stopChan)
}
// TODO: Close keepalive connections on reload? https://github.com/caddyserver/caddy/pull/2507/files#diff-70219fd88fe3f36834f474ce6537ed26R762
// remove hosts from our config from the pool
for _, upstream := range h.Upstreams {
hosts.Delete(upstream.String())
}
return nil
}
func (h *Handler) ServeHTTP(w http.ResponseWriter, r *http.Request, next caddyhttp.Handler) error {
repl := r.Context().Value(caddy.ReplacerCtxKey).(*caddy.Replacer)
// if enabled, buffer client request;
// this should only be enabled if the
// upstream requires it and does not
// work with "slow clients" (gunicorn,
// etc.) - this obviously has a perf
// overhead and makes the proxy at
// risk of exhausting memory and more
// susceptible to slowloris attacks,
// so it is strongly recommended to
// only use this feature if absolutely
// required, if read timeouts are set,
// and if body size is limited
if h.BufferRequests {
buf := bufPool.Get().(*bytes.Buffer)
buf.Reset()
defer bufPool.Put(buf)
io.Copy(buf, r.Body)
r.Body.Close()
r.Body = ioutil.NopCloser(buf)
}
// prepare the request for proxying; this is needed only once
err := h.prepareRequest(r)
if err != nil {
return caddyhttp.Error(http.StatusInternalServerError,
fmt.Errorf("preparing request for upstream round-trip: %v", err))
}
// we will need the original headers and Host
// value if header operations are configured
reqHeader := r.Header
reqHost := r.Host
start := time.Now()
var proxyErr error
for {
// choose an available upstream
upstream := h.LoadBalancing.SelectionPolicy.Select(h.Upstreams, r)
if upstream == nil {
if proxyErr == nil {
proxyErr = fmt.Errorf("no upstreams available")
}
if !h.LoadBalancing.tryAgain(start, proxyErr, r) {
break
}
continue
}
// the dial address may vary per-request if placeholders are
// used, so perform those replacements here; the resulting
// DialInfo struct should have valid network address syntax
dialInfo, err := upstream.fillDialInfo(r)
if err != nil {
return fmt.Errorf("making dial info: %v", err)
}
// attach to the request information about how to dial the upstream;
// this is necessary because the information cannot be sufficiently
// or satisfactorily represented in a URL
caddyhttp.SetVar(r.Context(), dialInfoVarKey, dialInfo)
// set placeholders with information about this upstream
repl.Set("http.reverse_proxy.upstream.address", dialInfo.String())
repl.Set("http.reverse_proxy.upstream.hostport", dialInfo.Address)
repl.Set("http.reverse_proxy.upstream.host", dialInfo.Host)
repl.Set("http.reverse_proxy.upstream.port", dialInfo.Port)
repl.Set("http.reverse_proxy.upstream.requests", upstream.Host.NumRequests())
repl.Set("http.reverse_proxy.upstream.max_requests", upstream.MaxRequests)
repl.Set("http.reverse_proxy.upstream.fails", upstream.Host.Fails())
// mutate request headers according to this upstream;
// because we're in a retry loop, we have to copy
// headers (and the r.Host value) from the original
// so that each retry is identical to the first
if h.Headers != nil && h.Headers.Request != nil {
r.Header = make(http.Header)
copyHeader(r.Header, reqHeader)
r.Host = reqHost
h.Headers.Request.ApplyToRequest(r)
}
// proxy the request to that upstream
proxyErr = h.reverseProxy(w, r, dialInfo, next)
if proxyErr == nil || proxyErr == context.Canceled {
// context.Canceled happens when the downstream client
// cancels the request, which is not our failure
return nil
}
// if the roundtrip was successful, don't retry the request or
// ding the health status of the upstream (an error can still
// occur after the roundtrip if, for example, a response handler
// after the roundtrip returns an error)
if succ, ok := proxyErr.(roundtripSucceeded); ok {
return succ.error
}
// remember this failure (if enabled)
h.countFailure(upstream)
// if we've tried long enough, break
if !h.LoadBalancing.tryAgain(start, proxyErr, r) {
break
}
}
return caddyhttp.Error(http.StatusBadGateway, proxyErr)
}
// prepareRequest modifies req so that it is ready to be proxied,
// except for directing to a specific upstream. This method mutates
// headers and other necessary properties of the request and should
// be done just once (before proxying) regardless of proxy retries.
// This assumes that no mutations of the request are performed
// by h during or after proxying.
func (h Handler) prepareRequest(req *http.Request) error {
// most of this is borrowed from the Go std lib reverse proxy
if req.ContentLength == 0 {
req.Body = nil // Issue golang/go#16036: nil Body for http.Transport retries
}
req.Close = false
// if User-Agent is not set by client, then explicitly
// disable it so it's not set to default value by std lib
if _, ok := req.Header["User-Agent"]; !ok {
req.Header.Set("User-Agent", "")
}
reqUpType := upgradeType(req.Header)
removeConnectionHeaders(req.Header)
// Remove hop-by-hop headers to the backend. Especially
// important is "Connection" because we want a persistent
// connection, regardless of what the client sent to us.
for _, h := range hopHeaders {
hv := req.Header.Get(h)
if hv == "" {
continue
}
if h == "Te" && hv == "trailers" {
// Issue golang/go#21096: tell backend applications that
// care about trailer support that we support
// trailers. (We do, but we don't go out of
// our way to advertise that unless the
// incoming client request thought it was
// worth mentioning)
continue
}
req.Header.Del(h)
}
// After stripping all the hop-by-hop connection headers above, add back any
// necessary for protocol upgrades, such as for websockets.
if reqUpType != "" {
req.Header.Set("Connection", "Upgrade")
req.Header.Set("Upgrade", reqUpType)
}
if clientIP, _, err := net.SplitHostPort(req.RemoteAddr); err == nil {
// If we aren't the first proxy retain prior
// X-Forwarded-For information as a comma+space
// separated list and fold multiple headers into one.
if prior, ok := req.Header["X-Forwarded-For"]; ok {
clientIP = strings.Join(prior, ", ") + ", " + clientIP
}
req.Header.Set("X-Forwarded-For", clientIP)
}
if req.Header.Get("X-Forwarded-Proto") == "" {
// set X-Forwarded-Proto; many backend apps expect this too
proto := "https"
if req.TLS == nil {
proto = "http"
}
req.Header.Set("X-Forwarded-Proto", proto)
}
return nil
}
// reverseProxy performs a round-trip to the given backend and processes the response with the client.
// (This method is mostly the beginning of what was borrowed from the net/http/httputil package in the
// Go standard library which was used as the foundation.)
func (h *Handler) reverseProxy(rw http.ResponseWriter, req *http.Request, di DialInfo, next caddyhttp.Handler) error {
di.Upstream.Host.CountRequest(1)
defer di.Upstream.Host.CountRequest(-1)
// point the request to this upstream
h.directRequest(req, di)
// do the round-trip; emit debug log with values we know are
// safe, or if there is no error, emit fuller log entry
start := time.Now()
res, err := h.Transport.RoundTrip(req)
duration := time.Since(start)
logger := h.logger.With(
zap.String("upstream", di.Upstream.String()),
zap.Object("request", caddyhttp.LoggableHTTPRequest{Request: req}),
zap.Duration("duration", duration))
if err != nil {
logger.Debug("upstream roundtrip", zap.Error(err))
return err
}
logger.Debug("upstream roundtrip",
zap.Object("headers", caddyhttp.LoggableHTTPHeader(res.Header)),
zap.Int("status", res.StatusCode))
// update circuit breaker on current conditions
if di.Upstream.cb != nil {
di.Upstream.cb.RecordMetric(res.StatusCode, duration)
}
// perform passive health checks (if enabled)
if h.HealthChecks != nil && h.HealthChecks.Passive != nil {
// strike if the status code matches one that is "bad"
for _, badStatus := range h.HealthChecks.Passive.UnhealthyStatus {
if caddyhttp.StatusCodeMatches(res.StatusCode, badStatus) {
h.countFailure(di.Upstream)
}
}
// strike if the roundtrip took too long
if h.HealthChecks.Passive.UnhealthyLatency > 0 &&
duration >= time.Duration(h.HealthChecks.Passive.UnhealthyLatency) {
h.countFailure(di.Upstream)
}
}
for i, rh := range h.HandleResponse {
if len(rh.Routes) == 0 {
continue
}
if rh.Match != nil && !rh.Match.Match(res.StatusCode, res.Header) {
continue
}
res.Body.Close()
repl := req.Context().Value(caddy.ReplacerCtxKey).(*caddy.Replacer)
repl.Set("http.reverse_proxy.status_code", res.StatusCode)
repl.Set("http.reverse_proxy.status_text", res.Status)
h.logger.Debug("handling response", zap.Int("handler", i))
if routeErr := rh.Routes.Compile(next).ServeHTTP(rw, req); routeErr != nil {
// wrap error in roundtripSucceeded so caller knows that
// the roundtrip was successful and to not retry
return roundtripSucceeded{routeErr}
}
}
// Deal with 101 Switching Protocols responses: (WebSocket, h2c, etc)
if res.StatusCode == http.StatusSwitchingProtocols {
h.handleUpgradeResponse(rw, req, res)
return nil
}
removeConnectionHeaders(res.Header)
for _, h := range hopHeaders {
res.Header.Del(h)
}
// apply any response header operations
if h.Headers != nil && h.Headers.Response != nil {
if h.Headers.Response.Require == nil ||
h.Headers.Response.Require.Match(res.StatusCode, res.Header) {
repl := req.Context().Value(caddy.ReplacerCtxKey).(*caddy.Replacer)
h.Headers.Response.ApplyTo(res.Header, repl)
}
}
copyHeader(rw.Header(), res.Header)
// The "Trailer" header isn't included in the Transport's response,
// at least for *http.Transport. Build it up from Trailer.
announcedTrailers := len(res.Trailer)
if announcedTrailers > 0 {
trailerKeys := make([]string, 0, len(res.Trailer))
for k := range res.Trailer {
trailerKeys = append(trailerKeys, k)
}
rw.Header().Add("Trailer", strings.Join(trailerKeys, ", "))
}
rw.WriteHeader(res.StatusCode)
err = h.copyResponse(rw, res.Body, h.flushInterval(req, res))
res.Body.Close() // close now, instead of defer, to populate res.Trailer
if err != nil {
// we're streaming the response and we've already written headers, so
// there's nothing an error handler can do to recover at this point;
// the standard lib's proxy panics at this point, but we'll just log
// the error and abort the stream here
h.logger.Error("aborting with incomplete response", zap.Error(err))
return nil
}
if len(res.Trailer) > 0 {
// Force chunking if we saw a response trailer.
// This prevents net/http from calculating the length for short
// bodies and adding a Content-Length.
if fl, ok := rw.(http.Flusher); ok {
fl.Flush()
}
}
if len(res.Trailer) == announcedTrailers {
copyHeader(rw.Header(), res.Trailer)
return nil
}
for k, vv := range res.Trailer {
k = http.TrailerPrefix + k
for _, v := range vv {
rw.Header().Add(k, v)
}
}
return nil
}
// tryAgain takes the time that the handler was initially invoked
// as well as any error currently obtained, and the request being
// tried, and returns true if another attempt should be made at
// proxying the request. If true is returned, it has already blocked
// long enough before the next retry (i.e. no more sleeping is
// needed). If false is returned, the handler should stop trying to
// proxy the request.
func (lb LoadBalancing) tryAgain(start time.Time, proxyErr error, req *http.Request) bool {
// if we've tried long enough, break
if time.Since(start) >= time.Duration(lb.TryDuration) {
return false
}
// if the error occurred while dialing (i.e. a connection
// could not even be established to the upstream), then it
// should be safe to retry, since without a connection, no
// HTTP request can be transmitted; but if the error is not
// specifically a dialer error, we need to be careful
if _, ok := proxyErr.(DialError); proxyErr != nil && !ok {
// if the error occurred after a connection was established,
// we have to assume the upstream received the request, and
// retries need to be carefully decided, because some requests
// are not idempotent
if lb.RetryMatch == nil && req.Method != "GET" {
// by default, don't retry requests if they aren't GET
return false
}
if !lb.RetryMatch.AnyMatch(req) {
return false
}
}
// otherwise, wait and try the next available host
time.Sleep(time.Duration(lb.TryInterval))
return true
}
// directRequest modifies only req.URL so that it points to the upstream
// in the given DialInfo. It must modify ONLY the request URL.
func (h Handler) directRequest(req *http.Request, di DialInfo) {
// we need a host, so set the upstream's host address
reqHost := di.Address
// if the port equates to the scheme, strip the port because
// it's weird to make a request like http://example.com:80/.
if (req.URL.Scheme == "http" && di.Port == "80") ||
(req.URL.Scheme == "https" && di.Port == "443") {
reqHost = di.Host
}
req.URL.Host = reqHost
}
func copyHeader(dst, src http.Header) {
for k, vv := range src {
for _, v := range vv {
dst.Add(k, v)
}
}
}
func cloneHeader(h http.Header) http.Header {
h2 := make(http.Header, len(h))
for k, vv := range h {
vv2 := make([]string, len(vv))
copy(vv2, vv)
h2[k] = vv2
}
return h2
}
func upgradeType(h http.Header) string {
if !httpguts.HeaderValuesContainsToken(h["Connection"], "Upgrade") {
return ""
}
return strings.ToLower(h.Get("Upgrade"))
}
func singleJoiningSlash(a, b string) string {
aslash := strings.HasSuffix(a, "/")
bslash := strings.HasPrefix(b, "/")
switch {
case aslash && bslash:
return a + b[1:]
case !aslash && !bslash:
return a + "/" + b
}
return a + b
}
// removeConnectionHeaders removes hop-by-hop headers listed in the "Connection" header of h.
// See RFC 7230, section 6.1
func removeConnectionHeaders(h http.Header) {
if c := h.Get("Connection"); c != "" {
for _, f := range strings.Split(c, ",") {
if f = strings.TrimSpace(f); f != "" {
h.Del(f)
}
}
}
}
// LoadBalancing has parameters related to load balancing.
type LoadBalancing struct {
// A selection policy is how to choose an available backend.
// The default policy is random selection.
SelectionPolicyRaw json.RawMessage `json:"selection_policy,omitempty" caddy:"namespace=http.reverse_proxy.selection_policies inline_key=policy"`
// How long to try selecting available backends for each request
// if the next available host is down. By default, this retry is
// disabled. Clients will wait for up to this long while the load
// balancer tries to find an available upstream host.
TryDuration caddy.Duration `json:"try_duration,omitempty"`
// How long to wait between selecting the next host from the pool. Default
// is 250ms. Only relevant when a request to an upstream host fails. Be
// aware that setting this to 0 with a non-zero try_duration can cause the
// CPU to spin if all backends are down and latency is very low.
TryInterval caddy.Duration `json:"try_interval,omitempty"`
// A list of matcher sets that restricts with which requests retries are
// allowed. A request must match any of the given matcher sets in order
// to be retried if the connection to the upstream succeeded but the
// subsequent round-trip failed. If the connection to the upstream failed,
// a retry is always allowed. If unspecified, only GET requests will be
// allowed to be retried. Note that a retry is done with the next available
// host according to the load balancing policy.
RetryMatchRaw caddyhttp.RawMatcherSets `json:"retry_match,omitempty" caddy:"namespace=http.matchers"`
SelectionPolicy Selector `json:"-"`
RetryMatch caddyhttp.MatcherSets `json:"-"`
}
// Selector selects an available upstream from the pool.
type Selector interface {
Select(UpstreamPool, *http.Request) *Upstream
}
// Hop-by-hop headers. These are removed when sent to the backend.
// As of RFC 7230, hop-by-hop headers are required to appear in the
// Connection header field. These are the headers defined by the
// obsoleted RFC 2616 (section 13.5.1) and are used for backward
// compatibility.
var hopHeaders = []string{
"Alt-Svc",
"Connection",
"Proxy-Connection", // non-standard but still sent by libcurl and rejected by e.g. google
"Keep-Alive",
"Proxy-Authenticate",
"Proxy-Authorization",
"Te", // canonicalized version of "TE"
"Trailer", // not Trailers per URL above; https://www.rfc-editor.org/errata_search.php?eid=4522
"Transfer-Encoding",
"Upgrade",
}
// DialError is an error that specifically occurs
// in a call to Dial or DialContext.
type DialError struct{ error }
// TLSTransport is implemented by transports
// that are capable of using TLS.
type TLSTransport interface {
// TLSEnabled returns true if the transport
// has TLS enabled, false otherwise.
TLSEnabled() bool
// EnableTLS enables TLS within the transport
// if it is not already, using the provided
// value as a basis for the TLS config.
EnableTLS(base *TLSConfig) error
}
// roundtripSucceeded is an error type that is returned if the
// roundtrip succeeded, but an error occurred after-the-fact.
type roundtripSucceeded struct{ error }
var bufPool = sync.Pool{
New: func() interface{} {
return new(bytes.Buffer)
},
}
// Interface guards
var (
_ caddy.Provisioner = (*Handler)(nil)
_ caddy.CleanerUpper = (*Handler)(nil)
_ caddyhttp.MiddlewareHandler = (*Handler)(nil)
)