* right side in tls ln
* remove ParseNetworkAddressFromHostPort
* ignore placeholder port
* remove println
* update test cases (!!!)
* []
* comment
* Trim
* Update addresses.go
* caddy adapt for listen_protocols
* adapt listen_socket
* allow multiple listen sockets for port ranges and readd socket fd listen logic
* readd logic to start servers according to listener protocols
* gofmt
* adapt caddytest
* gosec
* fmt and rename listen to listenWithSocket
* fmt and rename listen to listenWithSocket
* more consistent error msg
* non unix listenReusableWithSocketFile
* remove unused func
* doc comment typo
* nonosec
* commit
* doc comments
* more doc comments
* comment was misleading, cardinality did not change
* addressesWithProtocols
* update test
* fd/ and fdgram/
* rm addr
* actually write...
* i guess we doin' "skip": now
* wrong var in placeholder
* wrong var in placeholder II
* update param name in comment
* dont save nil file pointers
* windows
* key -> parsedKey
* osx
* multiple default_bind with protocols
* check for h1 and h2 listener netw
* caddyhttp: Reject 0-RTT early data in IP matchers and set Early-Data header when proxying
See RFC 8470: https://httpwg.org/specs/rfc8470.html
Thanks to Michael Wedl (@MWedl) at the University of Applied Sciences St. Poelten for reporting this.
* Don't return value for {remote} placeholder in early data
* Add Caddyfile support
* update quic-go to v0.42.0
* use a rate limiter to control QUIC source address verification
* Lint
* remove deprecated ListenQUIC
* remove number of requests tracking
* increase the number of handshakes before source address verification is needed
* remove references to request counters
* remove deprecated listen*
---------
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: WeidiDeng <weidi_deng@icloud.com>
* core: Apply SO_REUSEPORT to UDP sockets
For some reason, 10 months ago when I implemented SO_REUSEPORT
for TCP, I didn't realize, or forgot, that it can be used for UDP too. It is a
much better solution than using deadline hacks to reuse a socket, at
least for TCP.
Then https://github.com/mholt/caddy-l4/issues/132 was posted,
in which we see that UDP servers never actually stopped when the
L4 app was stopped. I verified this using this command:
$ nc -u 127.0.0.1 55353
combined with POSTing configs to the /load admin endpoint (which
alternated between an echo server and a proxy server so I could tell
which config was being used).
I refactored the code to use SO_REUSEPORT for UDP, but of course
we still need graceful reloads on all platforms, not just Unix, so I
also implemented a deadline hack similar to what we used for
TCP before. That implementation for TCP was not perfect, possibly
having a logical (not data) race condition; but for UDP so far it
seems to be working. Verified the same way I verified that SO_REUSEPORT
works.
I think this code is slightly cleaner and I'm fairly confident this code
is effective.
* Check error
* Fix return
* Fix var name
* implement Unwrap interface and clean up
* move unix packet conn to platform specific file
* implement Unwrap for unix packet conn
* Move sharedPacketConn into proper file
* Fix Windows
* move sharedPacketConn and fakeClosePacketConn to proper file
---------
Co-authored-by: Weidi Deng <weidi_deng@icloud.com>
* core: quic listener will manage the underlying socket by itself.
* format code
* rename sharedQUICTLSConfig to sharedQUICState, and it will now manage the number of active requests
* add comment
* strict unwrap type
* fix unwrap
* remove comment
* use gofmput to format code
* use gci to format imports
* reconfigure gci
* linter autofixes
* rearrange imports a little
* export GOOS=windows golangci-lint run ./... --fix
* cmd: fix cli when admin endpoint uses new unix socket permission format
Fixes a bug where the following Caddyfile
```Caddyfile
{
admin unix/admin.sock|0660
}
```
and `caddy reload --config Caddyfile`
would throw the following error instead of reloading it:
```
INFO using provided configuration {"config_file": "Caddyfile", "config_adapter": ""}
Error: sending configuration to instance: performing request: Post "http://127.0.0.1/load": dial unix admin.sock|0660: connect: no such file or directory
[ERROR] exit status 1
```
---
This bug also affected `caddy start` and `caddy stop`.
* Move splitter function to internal
---------
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* core: Add optional unix socket file permissions
This commit also changes the default unix socket file permissions to `u=w,g=,o=` (octal: `0200`).
It used to default to the shell's umask (usually `u=rwx,g=rx,o=rx`, octal: `0755`).
`/run/caddy.sock` -> `/run/caddy.sock` with `0200` default perms
`/run/caddy.sock|0222` -> `/run/caddy.sock` with `0222` perms
`|` instead of `:` is used as a separator, to account for the `:` in Windows drive letters (e.g. `C:\absolute\path.sock`)
Fun fact:
The old unix(7) man page (pre Jun 2016) stated a socket needs both read and write perms.
Turns out, only write perms are needed.
Corrected in 7578ea2f85
Despite this, most implementations still default to read+write to this date.
* Add cases with Windows paths to test
* Require write perms for the owning user
* fix http3 outdated certificates after config reload
* delegate quic tls GetConfigForClient to another struct.
* change type and method names
fix lint
---------
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* added some tests for parseUpstreamDialAddress
Test 4 fails because it produces "[[::1]]:80" instead of "[::1]:80"
* support absolute windows path in unix reverse proxy address
* make IsUnixNetwork public, support +h2c and reuse it
* add new tests
Reported on commit e3e8aabbcf
Abused this change in some bash for loops to rapidly reload config
while making requests and didn't observe any memory or resource leaks.
* core: Refactor, improve listener logic
Deprecate:
- caddy.Listen
- caddy.ListenTimeout
- caddy.ListenPacket
Prefer caddy.NetworkAddress.Listen() instead.
Change:
- caddy.ListenQUIC (hopefully to remove later)
- caddy.ListenerFunc signature (add context and ListenConfig)
- Don't emit Alt-Svc header advertising h3 over HTTP/3
- Use quic.ListenEarly instead of quic.ListenEarlyAddr; this gives us
more flexibility (e.g. possibility of HTTP/3 over UDS) but also
introduces a new issue:
https://github.com/lucas-clemente/quic-go/issues/3560#issuecomment-1258959608
- Unlink unix socket before and after use
* Appease the linter
* Keep ListenAll
* core: Refactor listeners; use SO_REUSEPORT on Unix
Just an experiment for now
* Fix lint by logging error
* TCP Keepalive configuration (#4865)
* initial attempt at TCP Keepalive configuration
* core: implement tcp-keepalive for linux
* move canSetKeepAlive interface
* Godoc for keepalive server parameter
* handle return values
* log keepalive errors
* Clean up after bad merge
* Merge in pluggable network types
From 1edc1a45e3
* Slight refactor, fix from recent merge conflict
Co-authored-by: Karmanyaah Malhotra <karmanyaah.gh@malhotra.cc>
* core: Plugins can register listener networks
This can be useful for custom listeners.
This feature/API is experimental and may change!
* caddyhttp: Expose server listeners
Previously, our "duplicate key in server block" logic was flawed because
it did not account for the site's bind address. We defer this check to
when the listener addresses have been assigned, but before we commit
a server block to its listener.
Also refined how network address parsing and joining works, which was
necessary for a less convoluted fix.
* explain cryptic unix socket listener error related to process kill
https://github.com/caddyserver/caddy/pull/4533
* less ambiguous wording: clean up -> delete
* shorten error message explanation
* link back to pull request in comment for later archeaology
When this listener code was first written, UsagePool didn't exist. We
can simplify much of the wrapped listener logic by utilizing UsagePool.
This also fixes a bug where new servers were able to clear deadlines
set by old servers, even if the old server didn't get booted out of its
Accept() call yet. And with the deadline cleared, they never would.
(Sometimes. Based on reports and difficulty of reproducing the bug,
this behavior was extremely rare.) I don't know why that happened
exactly, maybe some polling mechanism in the kernel and if the timings
worked out just wrong it would expose the bug.
Anyway, now we ensure that only the closer that set the deadline is the
same one that clears it, ensuring that old servers always return out of
Accept(), because the deadline doesn't get cleared until they do.
Of course, all this hinges on the hope that my suspicions in the middle
of the night are correct and that kernels work the way I think they do
in my head.
Also minor enhancement to UsagePool where if a value errors upon
construction (a very real possibility with listeners), it is removed from
the pool. Not 100% sure the sync logic is correct there, or maybe we
don't have to even put it in the pool until after construction, but it's
subtle either way and I think this is safe... right?
* ci: Use golangci's github action for linting
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix most of the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the prealloc lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the misspell lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the varcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the errcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the bodyclose lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the deadcode lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the unused lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosec lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosimple lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the ineffassign lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert the misspell change, use a neutral English
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove broken golangci-lint CI job
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Re-add errantly-removed weakrand initialization
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* don't break the loop and return
* Removing extra handling for null rootKey
* unignore RegisterModule/RegisterAdapter
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* single-line log message
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Fix lint after a1808b0dbf209c615e438a496d257ce5e3acdce2 was merged
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert ticker change, ignore it instead
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Ignore some of the write errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove blank line
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Use lifetime
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* close immediately
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Preallocate configVals
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddytls/distributedstek/distributedstek.go
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
To clarify, listening on wildcard interfaces is NOT the default and
should only be done under certain circumstances and when you know
what you're doing. Emits a warning in the log.
Fixes https://github.com/caddyserver/caddy-docker/issues/71
Wrapping listeners is useful for composing custom behavior related
to accepting, closing, reading/writing connections (etc) below the
application layer; for example, the PROXY protocol.
