More refactoring - nearly complete

config/directives.go

@@ -9,18 +9,47 @@ import (
 func init() {
 	// The parse package must know which directives
 	// are valid, but it must not import the setup
-	// or config package.
+	// or config package. To solve this problem, we
+	// fill up this map in our init function here.
+	// The parse package does not need to know the
+	// ordering of the directives.
 	for _, dir := range directiveOrder {
 		parse.ValidDirectives[dir.name] = struct{}{}
 	}
 }
 
+// Directives are registered in the order they should be
+// executed. Middleware (directives that inject a handler)
+// are executed in the order A-B-C-*-C-B-A, assuming
+// they all call the Next handler in the chain.
+//
+// Ordering is VERY important. Every middleware will
+// feel the effects of all other middleware below
+// (after) them during a request, but they must not
+// care what middleware above them are doing.
+//
+// For example, log needs to know the status code and
+// exactly how many bytes were written to the client,
+// which every other middleware can affect, so it gets
+// registered first. The errors middleware does not
+// care if gzip or log modifies its response, so it
+// gets registered below them. Gzip, on the other hand,
+// DOES care what errors does to the response since it
+// must compress every output to the client, even error
+// pages, so it must be registered before the errors
+// middleware and any others that would write to the
+// response.
 var directiveOrder = []directive{
+	// Essential directives that initialize vital configuration settings
 	{"root", setup.Root},
 	{"tls", setup.TLS},
+
+	// Other directives that don't create HTTP handlers
 	{"startup", setup.Startup},
 	{"shutdown", setup.Shutdown},
+	{"git", setup.Git},
 
+	// Directives that inject handlers (middleware)
 	{"log", setup.Log},
 	{"gzip", setup.Gzip},
 	{"errors", setup.Errors},
@@ -31,15 +60,19 @@ var directiveOrder = []directive{
 	{"basicauth", setup.BasicAuth},
 	{"proxy", setup.Proxy},
 	{"fastcgi", setup.FastCGI},
-	// {"websocket", setup.WebSocket},
-	// {"markdown", setup.Markdown},
-	// {"templates", setup.Templates},
-	// {"browse", setup.Browse},
+	{"websocket", setup.WebSocket},
+	{"markdown", setup.Markdown},
+	{"templates", setup.Templates},
+	{"browse", setup.Browse},
 }
 
+// directive ties together a directive name with its setup function.
 type directive struct {
 	name  string
 	setup setupFunc
 }
 
+// A setup function takes a setup controller. Its return values may
+// both be nil. If middleware is not nil, it will be chained into
+// the HTTP handlers in the order specified in this package.
 type setupFunc func(c *setup.Controller) (middleware.Middleware, error)

config/setup/browse.go

@@ -1,4 +1,83 @@
-package browse
+package setup
+
+import (
+	"fmt"
+	"html/template"
+	"io/ioutil"
+
+	"github.com/mholt/caddy/middleware"
+	"github.com/mholt/caddy/middleware/browse"
+)
+
+// Browse configures a new Browse middleware instance.
+func Browse(c *Controller) (middleware.Middleware, error) {
+	configs, err := browseParse(c)
+	if err != nil {
+		return nil, err
+	}
+
+	browse := browse.Browse{
+		Root:    c.Root,
+		Configs: configs,
+	}
+
+	return func(next middleware.Handler) middleware.Handler {
+		browse.Next = next
+		return browse
+	}, nil
+}
+
+func browseParse(c *Controller) ([]browse.Config, error) {
+	var configs []browse.Config
+
+	appendCfg := func(bc browse.Config) error {
+		for _, c := range configs {
+			if c.PathScope == bc.PathScope {
+				return fmt.Errorf("Duplicate browsing config for %s", c.PathScope)
+			}
+		}
+		configs = append(configs, bc)
+		return nil
+	}
+
+	for c.Next() {
+		var bc browse.Config
+
+		// First argument is directory to allow browsing; default is site root
+		if c.NextArg() {
+			bc.PathScope = c.Val()
+		} else {
+			bc.PathScope = "/"
+		}
+
+		// Second argument would be the template file to use
+		var tplText string
+		if c.NextArg() {
+			tplBytes, err := ioutil.ReadFile(c.Val())
+			if err != nil {
+				return configs, err
+			}
+			tplText = string(tplBytes)
+		} else {
+			tplText = defaultTemplate
+		}
+
+		// Build the template
+		tpl, err := template.New("listing").Parse(tplText)
+		if err != nil {
+			return configs, err
+		}
+		bc.Template = tpl
+
+		// Save configuration
+		err = appendCfg(bc)
+		if err != nil {
+			return configs, err
+		}
+	}
+
+	return configs, nil
+}
 
 // The default template to use when serving up directory listings
 const defaultTemplate = `<!DOCTYPE html>

config/setup/git.go

@@ -0,0 +1,171 @@
+package setup
+
+import (
+	"fmt"
+	"log"
+	"net/url"
+	"path/filepath"
+	"runtime"
+	"strconv"
+	"strings"
+	"time"
+
+	"github.com/mholt/caddy/middleware"
+	"github.com/mholt/caddy/middleware/git"
+)
+
+// Git configures a new Git service routine.
+func Git(c *Controller) (middleware.Middleware, error) {
+	repo, err := gitParse(c)
+	if err != nil {
+		return nil, err
+	}
+
+	c.Startup = append(c.Startup, func() error {
+		// Startup functions are blocking; start
+		// service routine in background
+		go func() {
+			for {
+				time.Sleep(repo.Interval)
+
+				err := repo.Pull()
+				if err != nil {
+					if git.Logger == nil {
+						log.Println(err)
+					} else {
+						git.Logger.Println(err)
+					}
+				}
+			}
+		}()
+
+		// Do a pull right away to return error
+		return repo.Pull()
+	})
+
+	return nil, err
+}
+
+func gitParse(c *Controller) (*git.Repo, error) {
+	repo := &git.Repo{Branch: "master", Interval: git.DefaultInterval, Path: c.Root}
+
+	for c.Next() {
+		args := c.RemainingArgs()
+
+		switch len(args) {
+		case 2:
+			repo.Path = filepath.Clean(c.Root + string(filepath.Separator) + args[1])
+			fallthrough
+		case 1:
+			repo.Url = args[0]
+		}
+
+		for c.NextBlock() {
+			switch c.Val() {
+			case "repo":
+				if !c.NextArg() {
+					return nil, c.ArgErr()
+				}
+				repo.Url = c.Val()
+			case "path":
+				if !c.NextArg() {
+					return nil, c.ArgErr()
+				}
+				repo.Path = filepath.Clean(c.Root + string(filepath.Separator) + c.Val())
+			case "branch":
+				if !c.NextArg() {
+					return nil, c.ArgErr()
+				}
+				repo.Branch = c.Val()
+			case "key":
+				if !c.NextArg() {
+					return nil, c.ArgErr()
+				}
+				repo.KeyPath = c.Val()
+			case "interval":
+				if !c.NextArg() {
+					return nil, c.ArgErr()
+				}
+				t, _ := strconv.Atoi(c.Val())
+				if t > 0 {
+					repo.Interval = time.Duration(t) * time.Second
+				}
+			case "then":
+				thenArgs := c.RemainingArgs()
+				if len(thenArgs) == 0 {
+					return nil, c.ArgErr()
+				}
+				repo.Then = strings.Join(thenArgs, " ")
+			}
+		}
+	}
+
+	// if repo is not specified, return error
+	if repo.Url == "" {
+		return nil, c.ArgErr()
+	}
+
+	// if private key is not specified, convert repository url to https
+	// to avoid ssh authentication
+	// else validate git url
+	// Note: private key support not yet available on Windows
+	var err error
+	if repo.KeyPath == "" {
+		repo.Url, repo.Host, err = sanitizeHttp(repo.Url)
+	} else {
+		repo.Url, repo.Host, err = sanitizeGit(repo.Url)
+		// TODO add Windows support for private repos
+		if runtime.GOOS == "windows" {
+			return nil, fmt.Errorf("Private repository not yet supported on Windows")
+		}
+	}
+
+	if err != nil {
+		return nil, err
+	}
+
+	// validate git availability in PATH
+	if err = git.InitGit(); err != nil {
+		return nil, err
+	}
+
+	return repo, repo.Prepare()
+}
+
+// sanitizeHttp cleans up repository url and converts to https format
+// if currently in ssh format.
+// Returns sanitized url, hostName (e.g. github.com, bitbucket.com)
+// and possible error
+func sanitizeHttp(repoUrl string) (string, string, error) {
+	url, err := url.Parse(repoUrl)
+	if err != nil {
+		return "", "", err
+	}
+
+	if url.Host == "" && strings.HasPrefix(url.Path, "git@") {
+		url.Path = url.Path[len("git@"):]
+		i := strings.Index(url.Path, ":")
+		if i < 0 {
+			return "", "", fmt.Errorf("Invalid git url %s", repoUrl)
+		}
+		url.Host = url.Path[:i]
+		url.Path = "/" + url.Path[i+1:]
+	}
+
+	repoUrl = "https://" + url.Host + url.Path
+	return repoUrl, url.Host, nil
+}
+
+// sanitizeGit cleans up repository url and validate ssh format.
+// Returns sanitized url, hostName (e.g. github.com, bitbucket.com)
+// and possible error
+func sanitizeGit(repoUrl string) (string, string, error) {
+	repoUrl = strings.TrimSpace(repoUrl)
+	if !strings.HasPrefix(repoUrl, "git@") || strings.Index(repoUrl, ":") < len("git@a:") {
+		return "", "", fmt.Errorf("Invalid git url %s", repoUrl)
+	}
+	hostUrl := repoUrl[len("git@"):]
+	i := strings.Index(hostUrl, ":")
+	host := hostUrl[:i]
+	return repoUrl, host, nil
+}

config/setup/markdown.go

@@ -0,0 +1,74 @@
+package setup
+
+import (
+	"github.com/mholt/caddy/middleware"
+	"github.com/mholt/caddy/middleware/markdown"
+	"github.com/russross/blackfriday"
+)
+
+// Markdown configures a new Markdown middleware instance.
+func Markdown(c *Controller) (middleware.Middleware, error) {
+	mdconfigs, err := markdownParse(c)
+	if err != nil {
+		return nil, err
+	}
+
+	md := markdown.Markdown{
+		Root:    c.Root,
+		Configs: mdconfigs,
+	}
+
+	return func(next middleware.Handler) middleware.Handler {
+		md.Next = next
+		return md
+	}, nil
+}
+
+func markdownParse(c *Controller) ([]markdown.Config, error) {
+	var mdconfigs []markdown.Config
+
+	for c.Next() {
+		md := markdown.Config{
+			Renderer: blackfriday.HtmlRenderer(0, "", ""),
+		}
+
+		// Get the path scope
+		if !c.NextArg() || c.Val() == "{" {
+			return mdconfigs, c.ArgErr()
+		}
+		md.PathScope = c.Val()
+
+		// Load any other configuration parameters
+		for c.NextBlock() {
+			switch c.Val() {
+			case "ext":
+				exts := c.RemainingArgs()
+				if len(exts) == 0 {
+					return mdconfigs, c.ArgErr()
+				}
+				md.Extensions = append(md.Extensions, exts...)
+			case "css":
+				if !c.NextArg() {
+					return mdconfigs, c.ArgErr()
+				}
+				md.Styles = append(md.Styles, c.Val())
+			case "js":
+				if !c.NextArg() {
+					return mdconfigs, c.ArgErr()
+				}
+				md.Scripts = append(md.Scripts, c.Val())
+			default:
+				return mdconfigs, c.Err("Expected valid markdown configuration property")
+			}
+		}
+
+		// If no extensions were specified, assume .md
+		if len(md.Extensions) == 0 {
+			md.Extensions = []string{".md"}
+		}
+
+		mdconfigs = append(mdconfigs, md)
+	}
+
+	return mdconfigs, nil
+}

config/setup/templates.go

@@ -0,0 +1,54 @@
+package setup
+
+import (
+	"github.com/mholt/caddy/middleware"
+	"github.com/mholt/caddy/middleware/templates"
+)
+
+// Templates configures a new Templates middleware instance.
+func Templates(c *Controller) (middleware.Middleware, error) {
+	rules, err := templatesParse(c)
+	if err != nil {
+		return nil, err
+	}
+
+	tmpls := templates.Templates{
+		Root:  c.Root,
+		Rules: rules,
+	}
+
+	return func(next middleware.Handler) middleware.Handler {
+		tmpls.Next = next
+		return tmpls
+	}, nil
+}
+
+func templatesParse(c *Controller) ([]templates.Rule, error) {
+	var rules []templates.Rule
+
+	for c.Next() {
+		var rule templates.Rule
+
+		if c.NextArg() {
+			// First argument would be the path
+			rule.Path = c.Val()
+
+			// Any remaining arguments are extensions
+			rule.Extensions = c.RemainingArgs()
+			if len(rule.Extensions) == 0 {
+				rule.Extensions = defaultExtensions
+			}
+		} else {
+			rule.Path = defaultPath
+			rule.Extensions = defaultExtensions
+		}
+
+		rules = append(rules, rule)
+	}
+
+	return rules, nil
+}
+
+const defaultPath = "/"
+
+var defaultExtensions = []string{".html", ".htm", ".txt"}

config/setup/websocket.go

@@ -0,0 +1,82 @@
+package setup
+
+import (
+	"github.com/mholt/caddy/middleware"
+	"github.com/mholt/caddy/middleware/websockets"
+)
+
+// WebSocket configures a new WebSockets middleware instance.
+func WebSocket(c *Controller) (middleware.Middleware, error) {
+	var websocks []websockets.Config
+	var respawn bool
+
+	optionalBlock := func() (hadBlock bool, err error) {
+		for c.NextBlock() {
+			hadBlock = true
+			if c.Val() == "respawn" {
+				respawn = true
+			} else {
+				return true, c.Err("Expected websocket configuration parameter in block")
+			}
+		}
+		return
+	}
+
+	for c.Next() {
+		var val, path, command string
+
+		// Path or command; not sure which yet
+		if !c.NextArg() {
+			return nil, c.ArgErr()
+		}
+		val = c.Val()
+
+		// Extra configuration may be in a block
+		hadBlock, err := optionalBlock()
+		if err != nil {
+			return nil, err
+		}
+
+		if !hadBlock {
+			// The next argument on this line will be the command or an open curly brace
+			if c.NextArg() {
+				path = val
+				command = c.Val()
+			} else {
+				path = "/"
+				command = val
+			}
+
+			// Okay, check again for optional block
+			hadBlock, err = optionalBlock()
+			if err != nil {
+				return nil, err
+			}
+		}
+
+		// Split command into the actual command and its arguments
+		cmd, args, err := middleware.SplitCommandAndArgs(command)
+		if err != nil {
+			return nil, err
+		}
+
+		websocks = append(websocks, websockets.Config{
+			Path:      path,
+			Command:   cmd,
+			Arguments: args,
+			Respawn:   respawn, // TODO: This isn't used currently
+		})
+	}
+
+	websockets.GatewayInterface = envGatewayInterface
+	websockets.ServerSoftware = envServerSoftware
+
+	return func(next middleware.Handler) middleware.Handler {
+		return websockets.WebSockets{Next: next, Sockets: websocks}
+	}, nil
+}
+
+const (
+	envGatewayInterface = "caddy-CGI/1.1"
+	envServerSoftware   = "caddy/" // TODO: Version
+)

middleware/browse/browse.go

@@ -4,9 +4,7 @@ package browse
 
 import (
 	"bytes"
-	"fmt"
 	"html/template"
-	"io/ioutil"
 	"net/http"
 	"net/url"
 	"os"
@@ -23,11 +21,11 @@ import (
 type Browse struct {
 	Next    middleware.Handler
 	Root    string
-	Configs []BrowseConfig
+	Configs []Config
 }
 
-// BrowseConfig is a configuration for browsing in a particular path.
-type BrowseConfig struct {
+// Config is a configuration for browsing in a particular path.
+type Config struct {
 	PathScope string
 	Template  *template.Template
 }
@@ -72,24 +70,6 @@ var IndexPages = []string{
 	"default.htm",
 }
 
-// New creates a new instance of browse middleware.
-func New(c middleware.Controller) (middleware.Middleware, error) {
-	configs, err := parse(c)
-	if err != nil {
-		return nil, err
-	}
-
-	browse := Browse{
-		Root:    c.Root(),
-		Configs: configs,
-	}
-
-	return func(next middleware.Handler) middleware.Handler {
-		browse.Next = next
-		return browse
-	}, nil
-}
-
 // ServeHTTP implements the middleware.Handler interface.
 func (b Browse) ServeHTTP(w http.ResponseWriter, r *http.Request) (int, error) {
 	filename := b.Root + r.URL.Path
@@ -196,56 +176,3 @@ func (b Browse) ServeHTTP(w http.ResponseWriter, r *http.Request) (int, error) {
 	// Didn't qualify; pass-thru
 	return b.Next.ServeHTTP(w, r)
 }
-
-// parse returns a list of browsing configurations
-func parse(c middleware.Controller) ([]BrowseConfig, error) {
-	var configs []BrowseConfig
-
-	appendCfg := func(bc BrowseConfig) error {
-		for _, c := range configs {
-			if c.PathScope == bc.PathScope {
-				return fmt.Errorf("Duplicate browsing config for %s", c.PathScope)
-			}
-		}
-		configs = append(configs, bc)
-		return nil
-	}
-
-	for c.Next() {
-		var bc BrowseConfig
-
-		// First argument is directory to allow browsing; default is site root
-		if c.NextArg() {
-			bc.PathScope = c.Val()
-		} else {
-			bc.PathScope = "/"
-		}
-
-		// Second argument would be the template file to use
-		var tplText string
-		if c.NextArg() {
-			tplBytes, err := ioutil.ReadFile(c.Val())
-			if err != nil {
-				return configs, err
-			}
-			tplText = string(tplBytes)
-		} else {
-			tplText = defaultTemplate
-		}
-
-		// Build the template
-		tpl, err := template.New("listing").Parse(tplText)
-		if err != nil {
-			return configs, err
-		}
-		bc.Template = tpl
-
-		// Save configuration
-		err = appendCfg(bc)
-		if err != nil {
-			return configs, err
-		}
-	}
-
-	return configs, nil
-}

middleware/extensions/ext.go

@@ -1,8 +1,9 @@
-// Package extension is middleware for clean URLs. The root path
-// of the site is passed in as well as possible extensions to try
-// internally for paths requested that don't match an existing
-// resource. The first path+ext combination that matches a valid
-// file will be used.
+// Package extension is middleware for clean URLs.
+//
+// The root path of the site is passed in as well as possible extensions
+// to try internally for paths requested that don't match an existing
+// resource. The first path+ext combination that matches a valid file
+// will be used.
 package extensions
 
 import (
@@ -14,25 +15,6 @@ import (
 	"github.com/mholt/caddy/middleware"
 )
 
-// New creates a new instance of middleware that assumes extensions
-// so the site can use cleaner, extensionless URLs
-func New(c middleware.Controller) (middleware.Middleware, error) {
-	root := c.Root()
-
-	extensions, err := parse(c)
-	if err != nil {
-		return nil, err
-	}
-
-	return func(next middleware.Handler) middleware.Handler {
-		return Ext{
-			Next:       next,
-			Extensions: extensions,
-			Root:       root,
-		}
-	}, nil
-}
-
 // Ext can assume an extension from clean URLs.
 // It tries extensions in the order listed in Extensions.
 type Ext struct {
@@ -60,25 +42,6 @@ func (e Ext) ServeHTTP(w http.ResponseWriter, r *http.Request) (int, error) {
 	return e.Next.ServeHTTP(w, r)
 }
 
-// parse sets up an instance of extension middleware
-// from a middleware controller and returns a list of extensions.
-func parse(c middleware.Controller) ([]string, error) {
-	var extensions []string
-
-	for c.Next() {
-		// At least one extension is required
-		if !c.NextArg() {
-			return extensions, c.ArgErr()
-		}
-		extensions = append(extensions, c.Val())
-
-		// Tack on any other extensions that may have been listed
-		extensions = append(extensions, c.RemainingArgs()...)
-	}
-
-	return extensions, nil
-}
-
 // resourceExists returns true if the file specified at
 // root + path exists; false otherwise.
 func resourceExists(root, path string) bool {

middleware/git/git.go

@@ -1,178 +1,36 @@
 package git
 
 import (
+	"bytes"
 	"fmt"
+	"io/ioutil"
 	"log"
-	"net/url"
 	"os"
-	"path/filepath"
-	"runtime"
-	"strconv"
+	"os/exec"
 	"strings"
+	"sync"
 	"time"
 
 	"github.com/mholt/caddy/middleware"
 )
 
+// DefaultInterval is the minimum interval to delay before
+// requesting another git pull
+const DefaultInterval time.Duration = time.Hour * 1
+
+// Number of retries if git pull fails
+const numRetries = 3
+
+// gitBinary holds the absolute path to git executable
+var gitBinary string
+
+// initMutex prevents parallel attempt to validate
+// git availability in PATH
+var initMutex sync.Mutex = sync.Mutex{}
+
 // Logger is used to log errors; if nil, the default log.Logger is used.
 var Logger *log.Logger
 
-// New creates a new instance of git middleware.
-func New(c middleware.Controller) (middleware.Middleware, error) {
-	repo, err := parse(c)
-	if err != nil {
-		return nil, err
-	}
-
-	c.Startup(func() error {
-		// Startup functions are blocking; start
-		// service routine in background
-		go func() {
-			for {
-				time.Sleep(repo.Interval)
-
-				err := repo.Pull()
-				if err != nil {
-					if Logger == nil {
-						log.Println(err)
-					} else {
-						Logger.Println(err)
-					}
-				}
-			}
-		}()
-
-		// Do a pull right away to return error
-		return repo.Pull()
-	})
-
-	return nil, err
-}
-
-func parse(c middleware.Controller) (*Repo, error) {
-	repo := &Repo{Branch: "master", Interval: DefaultInterval, Path: c.Root()}
-
-	for c.Next() {
-		args := c.RemainingArgs()
-
-		switch len(args) {
-		case 2:
-			repo.Path = filepath.Clean(c.Root() + string(filepath.Separator) + args[1])
-			fallthrough
-		case 1:
-			repo.Url = args[0]
-		}
-
-		for c.NextBlock() {
-			switch c.Val() {
-			case "repo":
-				if !c.NextArg() {
-					return nil, c.ArgErr()
-				}
-				repo.Url = c.Val()
-			case "path":
-				if !c.NextArg() {
-					return nil, c.ArgErr()
-				}
-				repo.Path = filepath.Clean(c.Root() + string(filepath.Separator) + c.Val())
-			case "branch":
-				if !c.NextArg() {
-					return nil, c.ArgErr()
-				}
-				repo.Branch = c.Val()
-			case "key":
-				if !c.NextArg() {
-					return nil, c.ArgErr()
-				}
-				repo.KeyPath = c.Val()
-			case "interval":
-				if !c.NextArg() {
-					return nil, c.ArgErr()
-				}
-				t, _ := strconv.Atoi(c.Val())
-				if t > 0 {
-					repo.Interval = time.Duration(t) * time.Second
-				}
-			case "then":
-				thenArgs := c.RemainingArgs()
-				if len(thenArgs) == 0 {
-					return nil, c.ArgErr()
-				}
-				repo.Then = strings.Join(thenArgs, " ")
-			}
-		}
-	}
-
-	// if repo is not specified, return error
-	if repo.Url == "" {
-		return nil, c.ArgErr()
-	}
-
-	// if private key is not specified, convert repository url to https
-	// to avoid ssh authentication
-	// else validate git url
-	// Note: private key support not yet available on Windows
-	var err error
-	if repo.KeyPath == "" {
-		repo.Url, repo.Host, err = sanitizeHttp(repo.Url)
-	} else {
-		repo.Url, repo.Host, err = sanitizeGit(repo.Url)
-		// TODO add Windows support for private repos
-		if runtime.GOOS == "windows" {
-			return nil, fmt.Errorf("Private repository not yet supported on Windows")
-		}
-	}
-
-	if err != nil {
-		return nil, err
-	}
-
-	// validate git availability in PATH
-	if err = initGit(); err != nil {
-		return nil, err
-	}
-
-	return repo, repo.prepare()
-}
-
-// sanitizeHttp cleans up repository url and converts to https format
-// if currently in ssh format.
-// Returns sanitized url, hostName (e.g. github.com, bitbucket.com)
-// and possible error
-func sanitizeHttp(repoUrl string) (string, string, error) {
-	url, err := url.Parse(repoUrl)
-	if err != nil {
-		return "", "", err
-	}
-
-	if url.Host == "" && strings.HasPrefix(url.Path, "git@") {
-		url.Path = url.Path[len("git@"):]
-		i := strings.Index(url.Path, ":")
-		if i < 0 {
-			return "", "", fmt.Errorf("Invalid git url %s", repoUrl)
-		}
-		url.Host = url.Path[:i]
-		url.Path = "/" + url.Path[i+1:]
-	}
-
-	repoUrl = "https://" + url.Host + url.Path
-	return repoUrl, url.Host, nil
-}
-
-// sanitizeGit cleans up repository url and validate ssh format.
-// Returns sanitized url, hostName (e.g. github.com, bitbucket.com)
-// and possible error
-func sanitizeGit(repoUrl string) (string, string, error) {
-	repoUrl = strings.TrimSpace(repoUrl)
-	if !strings.HasPrefix(repoUrl, "git@") || strings.Index(repoUrl, ":") < len("git@a:") {
-		return "", "", fmt.Errorf("Invalid git url %s", repoUrl)
-	}
-	hostUrl := repoUrl[len("git@"):]
-	i := strings.Index(hostUrl, ":")
-	host := hostUrl[:i]
-	return repoUrl, host, nil
-}
-
 // logger is an helper function to retrieve the available logger
 func logger() *log.Logger {
 	if Logger == nil {
@@ -180,3 +38,302 @@ func logger() *log.Logger {
 	}
 	return Logger
 }
+
+// Repo is the structure that holds required information
+// of a git repository.
+type Repo struct {
+	Url        string        // Repository URL
+	Path       string        // Directory to pull to
+	Host       string        // Git domain host e.g. github.com
+	Branch     string        // Git branch
+	KeyPath    string        // Path to private ssh key
+	Interval   time.Duration // Interval between pulls
+	Then       string        // Command to execute after successful git pull
+	pulled     bool          // true if there was a successful pull
+	lastPull   time.Time     // time of the last successful pull
+	lastCommit string        // hash for the most recent commit
+	sync.Mutex
+}
+
+// Pull attempts a git clone.
+// It retries at most numRetries times if error occurs
+func (r *Repo) Pull() error {
+	r.Lock()
+	defer r.Unlock()
+	// if it is less than interval since last pull, return
+	if time.Since(r.lastPull) <= r.Interval {
+		return nil
+	}
+
+	// keep last commit hash for comparison later
+	lastCommit := r.lastCommit
+
+	var err error
+	// Attempt to pull at most numRetries times
+	for i := 0; i < numRetries; i++ {
+		if err = r.pull(); err == nil {
+			break
+		}
+		logger().Println(err)
+	}
+
+	if err != nil {
+		return err
+	}
+
+	// check if there are new changes,
+	// then execute post pull command
+	if r.lastCommit == lastCommit {
+		logger().Println("No new changes.")
+		return nil
+	}
+	return r.postPullCommand()
+}
+
+// Pull performs git clone, or git pull if repository exists
+func (r *Repo) pull() error {
+	params := []string{"clone", "-b", r.Branch, r.Url, r.Path}
+	if r.pulled {
+		params = []string{"pull", "origin", r.Branch}
+	}
+
+	// if key is specified, pull using ssh key
+	if r.KeyPath != "" {
+		return r.pullWithKey(params)
+	}
+
+	dir := ""
+	if r.pulled {
+		dir = r.Path
+	}
+
+	var err error
+	if err = runCmd(gitBinary, params, dir); err == nil {
+		r.pulled = true
+		r.lastPull = time.Now()
+		logger().Printf("%v pulled.\n", r.Url)
+		r.lastCommit, err = r.getMostRecentCommit()
+	}
+	return err
+}
+
+// pullWithKey is used for private repositories and requires an ssh key.
+// Note: currently only limited to Linux and OSX.
+func (r *Repo) pullWithKey(params []string) error {
+	var gitSsh, script *os.File
+	// ensure temporary files deleted after usage
+	defer func() {
+		if gitSsh != nil {
+			os.Remove(gitSsh.Name())
+		}
+		if script != nil {
+			os.Remove(script.Name())
+		}
+	}()
+
+	var err error
+	// write git.sh script to temp file
+	gitSsh, err = writeScriptFile(gitWrapperScript(gitBinary))
+	if err != nil {
+		return err
+	}
+
+	// write git clone bash script to file
+	script, err = writeScriptFile(bashScript(gitSsh.Name(), r, params))
+	if err != nil {
+		return err
+	}
+
+	dir := ""
+	if r.pulled {
+		dir = r.Path
+	}
+
+	if err = runCmd(script.Name(), nil, dir); err == nil {
+		r.pulled = true
+		r.lastPull = time.Now()
+		logger().Printf("%v pulled.\n", r.Url)
+		r.lastCommit, err = r.getMostRecentCommit()
+	}
+	return err
+}
+
+// Prepare prepares for a git pull
+// and validates the configured directory
+func (r *Repo) Prepare() error {
+	// check if directory exists or is empty
+	// if not, create directory
+	fs, err := ioutil.ReadDir(r.Path)
+	if err != nil || len(fs) == 0 {
+		return os.MkdirAll(r.Path, os.FileMode(0755))
+	}
+
+	// validate git repo
+	isGit := false
+	for _, f := range fs {
+		if f.IsDir() && f.Name() == ".git" {
+			isGit = true
+			break
+		}
+	}
+
+	if isGit {
+		// check if same repository
+		var repoUrl string
+		if repoUrl, err = r.getRepoUrl(); err == nil && repoUrl == r.Url {
+			r.pulled = true
+			return nil
+		}
+		if err != nil {
+			return fmt.Errorf("Cannot retrieve repo url for %v Error: %v", r.Path, err)
+		}
+		return fmt.Errorf("Another git repo '%v' exists at %v", repoUrl, r.Path)
+	}
+	return fmt.Errorf("Cannot git clone into %v, directory not empty.", r.Path)
+}
+
+// getMostRecentCommit gets the hash of the most recent commit to the
+// repository. Useful for checking if changes occur.
+func (r *Repo) getMostRecentCommit() (string, error) {
+	command := gitBinary + ` --no-pager log -n 1 --pretty=format:"%H"`
+	c, args, err := middleware.SplitCommandAndArgs(command)
+	if err != nil {
+		return "", err
+	}
+	return runCmdOutput(c, args, r.Path)
+}
+
+// getRepoUrl retrieves remote origin url for the git repository at path
+func (r *Repo) getRepoUrl() (string, error) {
+	_, err := os.Stat(r.Path)
+	if err != nil {
+		return "", err
+	}
+	args := []string{"config", "--get", "remote.origin.url"}
+	return runCmdOutput(gitBinary, args, r.Path)
+}
+
+// postPullCommand executes r.Then.
+// It is trigged after successful git pull
+func (r *Repo) postPullCommand() error {
+	if r.Then == "" {
+		return nil
+	}
+	c, args, err := middleware.SplitCommandAndArgs(r.Then)
+	if err != nil {
+		return err
+	}
+
+	if err = runCmd(c, args, r.Path); err == nil {
+		logger().Printf("Command %v successful.\n", r.Then)
+	}
+	return err
+}
+
+// InitGit validates git installation and locates the git executable
+// binary in PATH
+func InitGit() error {
+	// prevent concurrent call
+	initMutex.Lock()
+	defer initMutex.Unlock()
+
+	// if validation has been done before and binary located in
+	// PATH, return.
+	if gitBinary != "" {
+		return nil
+	}
+
+	// locate git binary in path
+	var err error
+	gitBinary, err = exec.LookPath("git")
+	return err
+}
+
+// runCmd is a helper function to run commands.
+// It runs command with args from directory at dir.
+// The executed process outputs to os.Stderr
+func runCmd(command string, args []string, dir string) error {
+	cmd := exec.Command(command, args...)
+	cmd.Stderr = os.Stderr
+	cmd.Stdout = os.Stderr
+	cmd.Dir = dir
+	if err := cmd.Start(); err != nil {
+		return err
+	}
+	return cmd.Wait()
+}
+
+// runCmdOutput is a helper function to run commands and return output.
+// It runs command with args from directory at dir.
+// If successful, returns output and nil error
+func runCmdOutput(command string, args []string, dir string) (string, error) {
+	cmd := exec.Command(command, args...)
+	cmd.Dir = dir
+	var err error
+	if output, err := cmd.Output(); err == nil {
+		return string(bytes.TrimSpace(output)), nil
+	}
+	return "", err
+}
+
+// writeScriptFile writes content to a temporary file.
+// It changes the temporary file mode to executable and
+// closes it to prepare it for execution.
+func writeScriptFile(content []byte) (file *os.File, err error) {
+	if file, err = ioutil.TempFile("", "caddy"); err != nil {
+		return nil, err
+	}
+	if _, err = file.Write(content); err != nil {
+		return nil, err
+	}
+	if err = file.Chmod(os.FileMode(0755)); err != nil {
+		return nil, err
+	}
+	return file, file.Close()
+}
+
+// gitWrapperScript forms content for git.sh script
+var gitWrapperScript = func(gitBinary string) []byte {
+	return []byte(fmt.Sprintf(`#!/bin/bash
+
+# The MIT License (MIT)
+# Copyright (c) 2013 Alvin Abad
+
+if [ $# -eq 0 ]; then
+    echo "Git wrapper script that can specify an ssh-key file
+Usage:
+    git.sh -i ssh-key-file git-command
+    "
+    exit 1
+fi
+
+# remove temporary file on exit
+trap 'rm -f /tmp/.git_ssh.$$' 0
+
+if [ "$1" = "-i" ]; then
+    SSH_KEY=$2; shift; shift
+    echo "ssh -i $SSH_KEY \$@" > /tmp/.git_ssh.$$
+    chmod +x /tmp/.git_ssh.$$
+    export GIT_SSH=/tmp/.git_ssh.$$
+fi
+
+# in case the git command is repeated
+[ "$1" = "git" ] && shift
+
+# Run the git command
+%v "$@"
+
+`, gitBinary))
+}
+
+// bashScript forms content of bash script to clone or update a repo using ssh
+var bashScript = func(gitShPath string, repo *Repo, params []string) []byte {
+	return []byte(fmt.Sprintf(`#!/bin/bash
+
+mkdir -p ~/.ssh;
+touch ~/.ssh/known_hosts;
+ssh-keyscan -t rsa,dsa %v 2>&1 | sort -u - ~/.ssh/known_hosts > ~/.ssh/tmp_hosts;
+cat ~/.ssh/tmp_hosts >> ~/.ssh/known_hosts;
+%v -i %v %v;
+`, repo.Host, gitShPath, repo.KeyPath, strings.Join(params, " ")))
+}

middleware/git/gitclient.go

@@ -1,328 +0,0 @@
-package git
-
-import (
-	"bytes"
-	"fmt"
-	"io/ioutil"
-	"os"
-	"os/exec"
-	"strings"
-	"sync"
-	"time"
-
-	"github.com/mholt/caddy/middleware"
-)
-
-// DefaultInterval is the minimum interval to delay before
-// requesting another git pull
-const DefaultInterval time.Duration = time.Hour * 1
-
-// Number of retries if git pull fails
-const numRetries = 3
-
-// gitBinary holds the absolute path to git executable
-var gitBinary string
-
-// initMutex prevents parallel attempt to validate
-// git availability in PATH
-var initMutex sync.Mutex = sync.Mutex{}
-
-// Repo is the structure that holds required information
-// of a git repository.
-type Repo struct {
-	Url        string        // Repository URL
-	Path       string        // Directory to pull to
-	Host       string        // Git domain host e.g. github.com
-	Branch     string        // Git branch
-	KeyPath    string        // Path to private ssh key
-	Interval   time.Duration // Interval between pulls
-	Then       string        // Command to execute after successful git pull
-	pulled     bool          // true if there was a successful pull
-	lastPull   time.Time     // time of the last successful pull
-	lastCommit string        // hash for the most recent commit
-	sync.Mutex
-}
-
-// Pull attempts a git clone.
-// It retries at most numRetries times if error occurs
-func (r *Repo) Pull() error {
-	r.Lock()
-	defer r.Unlock()
-	// if it is less than interval since last pull, return
-	if time.Since(r.lastPull) <= r.Interval {
-		return nil
-	}
-
-	// keep last commit hash for comparison later
-	lastCommit := r.lastCommit
-
-	var err error
-	// Attempt to pull at most numRetries times
-	for i := 0; i < numRetries; i++ {
-		if err = r.pull(); err == nil {
-			break
-		}
-		logger().Println(err)
-	}
-
-	if err != nil {
-		return err
-	}
-
-	// check if there are new changes,
-	// then execute post pull command
-	if r.lastCommit == lastCommit {
-		logger().Println("No new changes.")
-		return nil
-	}
-	return r.postPullCommand()
-}
-
-// Pull performs git clone, or git pull if repository exists
-func (r *Repo) pull() error {
-	params := []string{"clone", "-b", r.Branch, r.Url, r.Path}
-	if r.pulled {
-		params = []string{"pull", "origin", r.Branch}
-	}
-
-	// if key is specified, pull using ssh key
-	if r.KeyPath != "" {
-		return r.pullWithKey(params)
-	}
-
-	dir := ""
-	if r.pulled {
-		dir = r.Path
-	}
-
-	var err error
-	if err = runCmd(gitBinary, params, dir); err == nil {
-		r.pulled = true
-		r.lastPull = time.Now()
-		logger().Printf("%v pulled.\n", r.Url)
-		r.lastCommit, err = r.getMostRecentCommit()
-	}
-	return err
-}
-
-// pullWithKey is used for private repositories and requires an ssh key.
-// Note: currently only limited to Linux and OSX.
-func (r *Repo) pullWithKey(params []string) error {
-	var gitSsh, script *os.File
-	// ensure temporary files deleted after usage
-	defer func() {
-		if gitSsh != nil {
-			os.Remove(gitSsh.Name())
-		}
-		if script != nil {
-			os.Remove(script.Name())
-		}
-	}()
-
-	var err error
-	// write git.sh script to temp file
-	gitSsh, err = writeScriptFile(gitWrapperScript(gitBinary))
-	if err != nil {
-		return err
-	}
-
-	// write git clone bash script to file
-	script, err = writeScriptFile(bashScript(gitSsh.Name(), r, params))
-	if err != nil {
-		return err
-	}
-
-	dir := ""
-	if r.pulled {
-		dir = r.Path
-	}
-
-	if err = runCmd(script.Name(), nil, dir); err == nil {
-		r.pulled = true
-		r.lastPull = time.Now()
-		logger().Printf("%v pulled.\n", r.Url)
-		r.lastCommit, err = r.getMostRecentCommit()
-	}
-	return err
-}
-
-// prepare prepares for a git pull
-// and validates the configured directory
-func (r *Repo) prepare() error {
-	// check if directory exists or is empty
-	// if not, create directory
-	fs, err := ioutil.ReadDir(r.Path)
-	if err != nil || len(fs) == 0 {
-		return os.MkdirAll(r.Path, os.FileMode(0755))
-	}
-
-	// validate git repo
-	isGit := false
-	for _, f := range fs {
-		if f.IsDir() && f.Name() == ".git" {
-			isGit = true
-			break
-		}
-	}
-
-	if isGit {
-		// check if same repository
-		var repoUrl string
-		if repoUrl, err = r.getRepoUrl(); err == nil && repoUrl == r.Url {
-			r.pulled = true
-			return nil
-		}
-		if err != nil {
-			return fmt.Errorf("Cannot retrieve repo url for %v Error: %v", r.Path, err)
-		}
-		return fmt.Errorf("Another git repo '%v' exists at %v", repoUrl, r.Path)
-	}
-	return fmt.Errorf("Cannot git clone into %v, directory not empty.", r.Path)
-}
-
-// getMostRecentCommit gets the hash of the most recent commit to the
-// repository. Useful for checking if changes occur.
-func (r *Repo) getMostRecentCommit() (string, error) {
-	command := gitBinary + ` --no-pager log -n 1 --pretty=format:"%H"`
-	c, args, err := middleware.SplitCommandAndArgs(command)
-	if err != nil {
-		return "", err
-	}
-	return runCmdOutput(c, args, r.Path)
-}
-
-// getRepoUrl retrieves remote origin url for the git repository at path
-func (r *Repo) getRepoUrl() (string, error) {
-	_, err := os.Stat(r.Path)
-	if err != nil {
-		return "", err
-	}
-	args := []string{"config", "--get", "remote.origin.url"}
-	return runCmdOutput(gitBinary, args, r.Path)
-}
-
-// postPullCommand executes r.Then.
-// It is trigged after successful git pull
-func (r *Repo) postPullCommand() error {
-	if r.Then == "" {
-		return nil
-	}
-	c, args, err := middleware.SplitCommandAndArgs(r.Then)
-	if err != nil {
-		return err
-	}
-
-	if err = runCmd(c, args, r.Path); err == nil {
-		logger().Printf("Command %v successful.\n", r.Then)
-	}
-	return err
-}
-
-// initGit validates git installation and locates the git executable
-// binary in PATH
-func initGit() error {
-	// prevent concurrent call
-	initMutex.Lock()
-	defer initMutex.Unlock()
-
-	// if validation has been done before and binary located in
-	// PATH, return.
-	if gitBinary != "" {
-		return nil
-	}
-
-	// locate git binary in path
-	var err error
-	gitBinary, err = exec.LookPath("git")
-	return err
-
-}
-
-// runCmd is a helper function to run commands.
-// It runs command with args from directory at dir.
-// The executed process outputs to os.Stderr
-func runCmd(command string, args []string, dir string) error {
-	cmd := exec.Command(command, args...)
-	cmd.Stderr = os.Stderr
-	cmd.Stdout = os.Stderr
-	cmd.Dir = dir
-	if err := cmd.Start(); err != nil {
-		return err
-	}
-	return cmd.Wait()
-}
-
-// runCmdOutput is a helper function to run commands and return output.
-// It runs command with args from directory at dir.
-// If successful, returns output and nil error
-func runCmdOutput(command string, args []string, dir string) (string, error) {
-	cmd := exec.Command(command, args...)
-	cmd.Dir = dir
-	var err error
-	if output, err := cmd.Output(); err == nil {
-		return string(bytes.TrimSpace(output)), nil
-	}
-	return "", err
-}
-
-// writeScriptFile writes content to a temporary file.
-// It changes the temporary file mode to executable and
-// closes it to prepare it for execution.
-func writeScriptFile(content []byte) (file *os.File, err error) {
-	if file, err = ioutil.TempFile("", "caddy"); err != nil {
-		return nil, err
-	}
-	if _, err = file.Write(content); err != nil {
-		return nil, err
-	}
-	if err = file.Chmod(os.FileMode(0755)); err != nil {
-		return nil, err
-	}
-	return file, file.Close()
-}
-
-// gitWrapperScript forms content for git.sh script
-var gitWrapperScript = func(gitBinary string) []byte {
-	return []byte(fmt.Sprintf(`#!/bin/bash
-
-# The MIT License (MIT)
-# Copyright (c) 2013 Alvin Abad
-
-if [ $# -eq 0 ]; then
-    echo "Git wrapper script that can specify an ssh-key file
-Usage:
-    git.sh -i ssh-key-file git-command
-    "
-    exit 1
-fi
-
-# remove temporary file on exit
-trap 'rm -f /tmp/.git_ssh.$$' 0
-
-if [ "$1" = "-i" ]; then
-    SSH_KEY=$2; shift; shift
-    echo "ssh -i $SSH_KEY \$@" > /tmp/.git_ssh.$$
-    chmod +x /tmp/.git_ssh.$$
-    export GIT_SSH=/tmp/.git_ssh.$$
-fi
-
-# in case the git command is repeated
-[ "$1" = "git" ] && shift
-
-# Run the git command
-%v "$@"
-
-`, gitBinary))
-}
-
-// bashScript forms content of bash script to clone or update a repo using ssh
-var bashScript = func(gitShPath string, repo *Repo, params []string) []byte {
-	return []byte(fmt.Sprintf(`#!/bin/bash
-
-mkdir -p ~/.ssh;
-touch ~/.ssh/known_hosts;
-ssh-keyscan -t rsa,dsa %v 2>&1 | sort -u - ~/.ssh/known_hosts > ~/.ssh/tmp_hosts;
-cat ~/.ssh/tmp_hosts >> ~/.ssh/known_hosts;
-%v -i %v %v;
-`, repo.Host, gitShPath, repo.KeyPath, strings.Join(params, " ")))
-}

middleware/markdown/markdown.go

@@ -24,11 +24,11 @@ type Markdown struct {
 	Next middleware.Handler
 
 	// The list of markdown configurations
-	Configs []MarkdownConfig
+	Configs []Config
 }
 
-// MarkdownConfig stores markdown middleware configurations.
-type MarkdownConfig struct {
+// Config stores markdown middleware configurations.
+type Config struct {
 	// Markdown renderer
 	Renderer blackfriday.Renderer
 
@@ -45,25 +45,6 @@ type MarkdownConfig struct {
 	Scripts []string
 }
 
-// New creates a new instance of Markdown middleware that
-// renders markdown to HTML on-the-fly.
-func New(c middleware.Controller) (middleware.Middleware, error) {
-	mdconfigs, err := parse(c)
-	if err != nil {
-		return nil, err
-	}
-
-	md := Markdown{
-		Root:    c.Root(),
-		Configs: mdconfigs,
-	}
-
-	return func(next middleware.Handler) middleware.Handler {
-		md.Next = next
-		return md
-	}, nil
-}
-
 // ServeHTTP implements the http.Handler interface.
 func (md Markdown) ServeHTTP(w http.ResponseWriter, r *http.Request) (int, error) {
 	for _, m := range md.Configs {
@@ -125,56 +106,6 @@ func (md Markdown) ServeHTTP(w http.ResponseWriter, r *http.Request) (int, error
 	return md.Next.ServeHTTP(w, r)
 }
 
-// parse creates new instances of Markdown middleware.
-func parse(c middleware.Controller) ([]MarkdownConfig, error) {
-	var mdconfigs []MarkdownConfig
-
-	for c.Next() {
-		md := MarkdownConfig{
-			Renderer: blackfriday.HtmlRenderer(0, "", ""),
-		}
-
-		// Get the path scope
-		if !c.NextArg() || c.Val() == "{" {
-			return mdconfigs, c.ArgErr()
-		}
-		md.PathScope = c.Val()
-
-		// Load any other configuration parameters
-		for c.NextBlock() {
-			switch c.Val() {
-			case "ext":
-				exts := c.RemainingArgs()
-				if len(exts) == 0 {
-					return mdconfigs, c.ArgErr()
-				}
-				md.Extensions = append(md.Extensions, exts...)
-			case "css":
-				if !c.NextArg() {
-					return mdconfigs, c.ArgErr()
-				}
-				md.Styles = append(md.Styles, c.Val())
-			case "js":
-				if !c.NextArg() {
-					return mdconfigs, c.ArgErr()
-				}
-				md.Scripts = append(md.Scripts, c.Val())
-			default:
-				return mdconfigs, c.Err("Expected valid markdown configuration property")
-			}
-		}
-
-		// If no extensions were specified, assume .md
-		if len(md.Extensions) == 0 {
-			md.Extensions = []string{".md"}
-		}
-
-		mdconfigs = append(mdconfigs, md)
-	}
-
-	return mdconfigs, nil
-}
-
 const (
 	htmlTemplate = `<!DOCTYPE html>
 <html>

middleware/templates/templates.go

@@ -10,24 +10,6 @@ import (
 	"github.com/mholt/caddy/middleware"
 )
 
-// New constructs a new Templates middleware instance.
-func New(c middleware.Controller) (middleware.Middleware, error) {
-	rules, err := parse(c)
-	if err != nil {
-		return nil, err
-	}
-
-	tmpls := Templates{
-		Root:  c.Root(),
-		Rules: rules,
-	}
-
-	return func(next middleware.Handler) middleware.Handler {
-		tmpls.Next = next
-		return tmpls
-	}, nil
-}
-
 // ServeHTTP implements the middleware.Handler interface.
 func (t Templates) ServeHTTP(w http.ResponseWriter, r *http.Request) (int, error) {
 	for _, rule := range t.Rules {
@@ -64,32 +46,6 @@ func (t Templates) ServeHTTP(w http.ResponseWriter, r *http.Request) (int, error
 	return t.Next.ServeHTTP(w, r)
 }
 
-func parse(c middleware.Controller) ([]Rule, error) {
-	var rules []Rule
-
-	for c.Next() {
-		var rule Rule
-
-		if c.NextArg() {
-			// First argument would be the path
-			rule.Path = c.Val()
-
-			// Any remaining arguments are extensions
-			rule.Extensions = c.RemainingArgs()
-			if len(rule.Extensions) == 0 {
-				rule.Extensions = defaultExtensions
-			}
-		} else {
-			rule.Path = defaultPath
-			rule.Extensions = defaultExtensions
-		}
-
-		rules = append(rules, rule)
-	}
-
-	return rules, nil
-}
-
 // Templates is middleware to render templated files as the HTTP response.
 type Templates struct {
 	Next  middleware.Handler
@@ -104,7 +60,3 @@ type Rule struct {
 	Path       string
 	Extensions []string
 }
-
-const defaultPath = "/"
-
-var defaultExtensions = []string{".html", ".htm", ".txt"}

middleware/websockets/websocket.go

@@ -12,7 +12,7 @@ import (
 // WebSocket represents a web socket server instance. A WebSocket
 // is instantiated for each new websocket request/connection.
 type WebSocket struct {
-	WSConfig
+	Config
 	*http.Request
 }
 

middleware/websockets/websockets.go

@@ -19,12 +19,12 @@ type (
 		Next middleware.Handler
 
 		// Sockets holds all the web socket endpoint configurations
-		Sockets []WSConfig
+		Sockets []Config
 	}
 
 	// WSConfig holds the configuration for a single websocket
 	// endpoint which may serve multiple websocket connections.
-	WSConfig struct {
+	Config struct {
 		Path      string
 		Command   string
 		Arguments []string
@@ -37,7 +37,7 @@ func (ws WebSockets) ServeHTTP(w http.ResponseWriter, r *http.Request) (int, err
 	for _, sockconfig := range ws.Sockets {
 		if middleware.Path(r.URL.Path).Matches(sockconfig.Path) {
 			socket := WebSocket{
-				WSConfig: sockconfig,
+				Config:  sockconfig,
 				Request: r,
 			}
 			websocket.Handler(socket.Handle).ServeHTTP(w, r)
@@ -49,77 +49,6 @@ func (ws WebSockets) ServeHTTP(w http.ResponseWriter, r *http.Request) (int, err
 	return ws.Next.ServeHTTP(w, r)
 }
 
-// New constructs and configures a new websockets middleware instance.
-func New(c middleware.Controller) (middleware.Middleware, error) {
-	var websocks []WSConfig
-	var respawn bool
-
-	optionalBlock := func() (hadBlock bool, err error) {
-		for c.NextBlock() {
-			hadBlock = true
-			if c.Val() == "respawn" {
-				respawn = true
-			} else {
-				return true, c.Err("Expected websocket configuration parameter in block")
-			}
-		}
-		return
-	}
-
-	for c.Next() {
-		var val, path, command string
-
-		// Path or command; not sure which yet
-		if !c.NextArg() {
-			return nil, c.ArgErr()
-		}
-		val = c.Val()
-
-		// Extra configuration may be in a block
-		hadBlock, err := optionalBlock()
-		if err != nil {
-			return nil, err
-		}
-
-		if !hadBlock {
-			// The next argument on this line will be the command or an open curly brace
-			if c.NextArg() {
-				path = val
-				command = c.Val()
-			} else {
-				path = "/"
-				command = val
-			}
-
-			// Okay, check again for optional block
-			hadBlock, err = optionalBlock()
-			if err != nil {
-				return nil, err
-			}
-		}
-
-		// Split command into the actual command and its arguments
-		cmd, args, err := middleware.SplitCommandAndArgs(command)
-		if err != nil {
-			return nil, err
-		}
-
-		websocks = append(websocks, WSConfig{
-			Path:      path,
-			Command:   cmd,
-			Arguments: args,
-			Respawn:   respawn, // TODO: This isn't used currently
-		})
-	}
-
-	GatewayInterface = envGatewayInterface
-	ServerSoftware = envServerSoftware
-
-	return func(next middleware.Handler) middleware.Handler {
-		return WebSockets{Next: next, Sockets: websocks}
-	}, nil
-}
-
 var (
 	// See CGI spec, 4.1.4
 	GatewayInterface string
@@ -127,8 +56,3 @@ var (
 	// See CGI spec, 4.1.17
 	ServerSoftware string
 )
-
-const (
-	envGatewayInterface = "caddy-CGI/1.1"
-	envServerSoftware   = "caddy/" // TODO: Version
-)