0
Fork 0
mirror of https://github.com/caddyserver/caddy.git synced 2024-12-23 22:27:38 -05:00
caddy/controller.go

146 lines
5.1 KiB
Go
Raw Normal View History

// Copyright 2015 Light Code Labs, LLC
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
package caddy
import (
"strings"
"github.com/mholt/caddy/caddyfile"
)
// Controller is given to the setup function of directives which
// gives them access to be able to read tokens with which to
// configure themselves. It also stores state for the setup
// functions, can get the current context, and can be used to
// identify a particular server block using the Key field.
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
type Controller struct {
caddyfile.Dispenser
// The instance in which the setup is occurring
instance *Instance
// Key is the key from the top of the server block, usually
// an address, hostname, or identifier of some sort.
Key string
// OncePerServerBlock is a function that executes f
// exactly once per server block, no matter how many
// hosts are associated with it. If it is the first
// time, the function f is executed immediately
// (not deferred) and may return an error which is
// returned by OncePerServerBlock.
OncePerServerBlock func(f func() error) error
// ServerBlockIndex is the 0-based index of the
// server block as it appeared in the input.
ServerBlockIndex int
// ServerBlockKeyIndex is the 0-based index of this
// key as it appeared in the input at the head of the
// server block.
ServerBlockKeyIndex int
// ServerBlockKeys is a list of keys that are
// associated with this server block. All these
// keys, consequently, share the same tokens.
ServerBlockKeys []string
// ServerBlockStorage is used by a directive's
// setup function to persist state between all
// the keys on a server block.
ServerBlockStorage interface{}
}
// ServerType gets the name of the server type that is being set up.
func (c *Controller) ServerType() string {
return c.instance.serverType
}
// OnFirstStartup adds fn to the list of callback functions to execute
// when the server is about to be started NOT as part of a restart.
func (c *Controller) OnFirstStartup(fn func() error) {
c.instance.OnFirstStartup = append(c.instance.OnFirstStartup, fn)
}
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
// OnStartup adds fn to the list of callback functions to execute
// when the server is about to be started (including restarts).
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
func (c *Controller) OnStartup(fn func() error) {
c.instance.OnStartup = append(c.instance.OnStartup, fn)
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
}
// OnRestart adds fn to the list of callback functions to execute
// when the server is about to be restarted.
func (c *Controller) OnRestart(fn func() error) {
c.instance.OnRestart = append(c.instance.OnRestart, fn)
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
}
caddy: Add OnRestartFailed callback (#2262) * Add callback OnRestartFailed to caddy.Controller * markdown: Fix 500 error (#2266) * Addressed the comments * Update paths for filebrowser plugins * httpserver: update minify ordering (#2273) * Bump required version of golang to 1.10 in README.md (#2267) Adding TLS client cert placeholders #2217 uses features of go v1.10. Update README requirements accordingly. * Update CI to use Go 1.11 * caddytls: gofmt (Go 1.11) (#2241) * Ensure assets path exists before writing UUID file * Adding {when_unix_ms} requests placeholder (unix timestamp with a milliseconds precision) (#2260) * update to quic-go v0.10.0 (#2288) quic-go now vendors all of its dependencies, so we don't need to vendor them here. Created by running: gvt delete github.com/lucas-clemente/quic-go gvt delete github.com/bifurcation/mint gvt delete github.com/lucas-clemente/aes12 gvt delete github.com/lucas-clemente/fnv128a gvt delete github.com/lucas-clemente/quic-go-certificates gvt delete github.com/aead/chacha20 gvt delete github.com/hashicorp/golang-lru gvt fetch -tag v0.10.0-no-integrationtests github.com/lucas-clemente/quic-go * fastcgi: Add default timeouts (#2265) Default fastcgi timeout is 60 seconds Add tests * Fix AppVeyor builds (#2289) * Attempting to fix AppVeyor builds * Trying again, 2015 image this time * Use Appveyor's Go 1.11 stack * Restore GOPATH\bin to PATH and delete old image config * Add gcc to path manually * Addressed the comments * Fix broken link to sourcegraph in README (#2285) * Fix deadlock, ensure instances mutex unlocked (#2296) it's a stupid mistake * proxy: Use DualStack=true in defaultDialer (#2305) * ci: get golint tool from `golang.org/x/lint/golint` (#2324) * templates: TLSVersion (#2323) * new template action: TLS protocol version * new template action: use caddytls.GetSupportedProtocolName Avoids code duplication by reusing existing method to get TLS protocol version used on connection. Also adds tests * Don't return error on onRestartFail. Only log it.
2018-10-29 19:00:44 -05:00
// OnRestartFailed adds fn to the list of callback functions to execute
// if the server failed to restart.
func (c *Controller) OnRestartFailed(fn func() error) {
c.instance.OnRestartFailed = append(c.instance.OnRestartFailed, fn)
caddy: Add OnRestartFailed callback (#2262) * Add callback OnRestartFailed to caddy.Controller * markdown: Fix 500 error (#2266) * Addressed the comments * Update paths for filebrowser plugins * httpserver: update minify ordering (#2273) * Bump required version of golang to 1.10 in README.md (#2267) Adding TLS client cert placeholders #2217 uses features of go v1.10. Update README requirements accordingly. * Update CI to use Go 1.11 * caddytls: gofmt (Go 1.11) (#2241) * Ensure assets path exists before writing UUID file * Adding {when_unix_ms} requests placeholder (unix timestamp with a milliseconds precision) (#2260) * update to quic-go v0.10.0 (#2288) quic-go now vendors all of its dependencies, so we don't need to vendor them here. Created by running: gvt delete github.com/lucas-clemente/quic-go gvt delete github.com/bifurcation/mint gvt delete github.com/lucas-clemente/aes12 gvt delete github.com/lucas-clemente/fnv128a gvt delete github.com/lucas-clemente/quic-go-certificates gvt delete github.com/aead/chacha20 gvt delete github.com/hashicorp/golang-lru gvt fetch -tag v0.10.0-no-integrationtests github.com/lucas-clemente/quic-go * fastcgi: Add default timeouts (#2265) Default fastcgi timeout is 60 seconds Add tests * Fix AppVeyor builds (#2289) * Attempting to fix AppVeyor builds * Trying again, 2015 image this time * Use Appveyor's Go 1.11 stack * Restore GOPATH\bin to PATH and delete old image config * Add gcc to path manually * Addressed the comments * Fix broken link to sourcegraph in README (#2285) * Fix deadlock, ensure instances mutex unlocked (#2296) it's a stupid mistake * proxy: Use DualStack=true in defaultDialer (#2305) * ci: get golint tool from `golang.org/x/lint/golint` (#2324) * templates: TLSVersion (#2323) * new template action: TLS protocol version * new template action: use caddytls.GetSupportedProtocolName Avoids code duplication by reusing existing method to get TLS protocol version used on connection. Also adds tests * Don't return error on onRestartFail. Only log it.
2018-10-29 19:00:44 -05:00
}
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
// OnShutdown adds fn to the list of callback functions to execute
// when the server is about to be shut down (including restarts).
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
func (c *Controller) OnShutdown(fn func() error) {
c.instance.OnShutdown = append(c.instance.OnShutdown, fn)
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
}
// OnFinalShutdown adds fn to the list of callback functions to execute
// when the server is about to be shut down NOT as part of a restart.
func (c *Controller) OnFinalShutdown(fn func() error) {
c.instance.OnFinalShutdown = append(c.instance.OnFinalShutdown, fn)
}
// Context gets the context associated with the instance associated with c.
func (c *Controller) Context() Context {
return c.instance.context
}
tls: Restructure and improve certificate management - Expose the list of Caddy instances through caddy.Instances() - Added arbitrary storage to caddy.Instance - The cache of loaded certificates is no longer global; now scoped per-instance, meaning upon reload (like SIGUSR1) the old cert cache will be discarded entirely, whereas before, aggressively reloading config that added and removed lots of sites would cause unnecessary build-up in the cache over time. - Key certificates in the cache by their SHA-256 hash instead of by their names. This means certificates will not be duplicated in memory (within each instance), making Caddy much more memory-efficient for large-scale deployments with thousands of sites sharing certs. - Perform name-to-certificate lookups scoped per caddytls.Config instead of a single global lookup. This prevents certificates from stepping on each other when they overlap in their names. - Do not allow TLS configurations keyed by the same hostname to be different; this now throws an error. - Updated relevant tests, with a stark awareness that more tests are needed. - Change the NewContext function signature to include an *Instance. - Strongly recommend (basically require) use of caddytls.NewConfig() to create a new *caddytls.Config, to ensure pointers to the instance certificate cache are initialized properly. - Update the TLS-SNI challenge solver (even though TLS-SNI is disabled currently on the CA side). Store temporary challenge cert in instance cache, but do so directly by the ACME challenge name, not the hash. Modified the getCertificate function to check the cache directly for a name match if one isn't found otherwise. This will allow any caddytls.Config to be able to help solve a TLS-SNI challenge, with one extra side-effect that might actually be kind of interesting (and useless): clients could send a certificate's hash as the SNI and Caddy would be able to serve that certificate for the handshake. - Do not attempt to match a "default" (random) certificate when SNI is present but unrecognized; return no certificate so a TLS alert happens instead. - Store an Instance in the list of instances even while the instance is still starting up (this allows access to the cert cache for performing renewals at startup, etc). Will be removed from list again if instance startup fails. - Laid groundwork for ACMEv2 and Let's Encrypt wildcard support. Server type plugins will need to be updated slightly to accommodate minor adjustments to their API (like passing in an Instance). This commit includes the changes for the HTTP server. Certain Caddyfile configurations might error out with this change, if they configured different TLS settings for the same hostname. This change trades some complexity for other complexity, but ultimately this new complexity is more correct and robust than earlier logic. Fixes #1991 Fixes #1994 Fixes #1303
2018-02-04 02:58:27 -05:00
// Get safely gets a value from the Instance's storage.
func (c *Controller) Get(key interface{}) interface{} {
c.instance.StorageMu.RLock()
defer c.instance.StorageMu.RUnlock()
return c.instance.Storage[key]
}
// Set safely sets a value on the Instance's storage.
func (c *Controller) Set(key, val interface{}) {
c.instance.StorageMu.Lock()
c.instance.Storage[key] = val
c.instance.StorageMu.Unlock()
}
// NewTestController creates a new Controller for
// the server type and input specified. The filename
// is "Testfile". If the server type is not empty and
// is plugged in, a context will be created so that
// the results of setup functions can be checked for
// correctness.
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
//
// Used only for testing, but exported so plugins can
// use this for convenience.
func NewTestController(serverType, input string) *Controller {
tls: Restructure and improve certificate management - Expose the list of Caddy instances through caddy.Instances() - Added arbitrary storage to caddy.Instance - The cache of loaded certificates is no longer global; now scoped per-instance, meaning upon reload (like SIGUSR1) the old cert cache will be discarded entirely, whereas before, aggressively reloading config that added and removed lots of sites would cause unnecessary build-up in the cache over time. - Key certificates in the cache by their SHA-256 hash instead of by their names. This means certificates will not be duplicated in memory (within each instance), making Caddy much more memory-efficient for large-scale deployments with thousands of sites sharing certs. - Perform name-to-certificate lookups scoped per caddytls.Config instead of a single global lookup. This prevents certificates from stepping on each other when they overlap in their names. - Do not allow TLS configurations keyed by the same hostname to be different; this now throws an error. - Updated relevant tests, with a stark awareness that more tests are needed. - Change the NewContext function signature to include an *Instance. - Strongly recommend (basically require) use of caddytls.NewConfig() to create a new *caddytls.Config, to ensure pointers to the instance certificate cache are initialized properly. - Update the TLS-SNI challenge solver (even though TLS-SNI is disabled currently on the CA side). Store temporary challenge cert in instance cache, but do so directly by the ACME challenge name, not the hash. Modified the getCertificate function to check the cache directly for a name match if one isn't found otherwise. This will allow any caddytls.Config to be able to help solve a TLS-SNI challenge, with one extra side-effect that might actually be kind of interesting (and useless): clients could send a certificate's hash as the SNI and Caddy would be able to serve that certificate for the handshake. - Do not attempt to match a "default" (random) certificate when SNI is present but unrecognized; return no certificate so a TLS alert happens instead. - Store an Instance in the list of instances even while the instance is still starting up (this allows access to the cert cache for performing renewals at startup, etc). Will be removed from list again if instance startup fails. - Laid groundwork for ACMEv2 and Let's Encrypt wildcard support. Server type plugins will need to be updated slightly to accommodate minor adjustments to their API (like passing in an Instance). This commit includes the changes for the HTTP server. Certain Caddyfile configurations might error out with this change, if they configured different TLS settings for the same hostname. This change trades some complexity for other complexity, but ultimately this new complexity is more correct and robust than earlier logic. Fixes #1991 Fixes #1994 Fixes #1303
2018-02-04 02:58:27 -05:00
testInst := &Instance{serverType: serverType, Storage: make(map[interface{}]interface{})}
if stype, err := getServerType(serverType); err == nil {
tls: Restructure and improve certificate management - Expose the list of Caddy instances through caddy.Instances() - Added arbitrary storage to caddy.Instance - The cache of loaded certificates is no longer global; now scoped per-instance, meaning upon reload (like SIGUSR1) the old cert cache will be discarded entirely, whereas before, aggressively reloading config that added and removed lots of sites would cause unnecessary build-up in the cache over time. - Key certificates in the cache by their SHA-256 hash instead of by their names. This means certificates will not be duplicated in memory (within each instance), making Caddy much more memory-efficient for large-scale deployments with thousands of sites sharing certs. - Perform name-to-certificate lookups scoped per caddytls.Config instead of a single global lookup. This prevents certificates from stepping on each other when they overlap in their names. - Do not allow TLS configurations keyed by the same hostname to be different; this now throws an error. - Updated relevant tests, with a stark awareness that more tests are needed. - Change the NewContext function signature to include an *Instance. - Strongly recommend (basically require) use of caddytls.NewConfig() to create a new *caddytls.Config, to ensure pointers to the instance certificate cache are initialized properly. - Update the TLS-SNI challenge solver (even though TLS-SNI is disabled currently on the CA side). Store temporary challenge cert in instance cache, but do so directly by the ACME challenge name, not the hash. Modified the getCertificate function to check the cache directly for a name match if one isn't found otherwise. This will allow any caddytls.Config to be able to help solve a TLS-SNI challenge, with one extra side-effect that might actually be kind of interesting (and useless): clients could send a certificate's hash as the SNI and Caddy would be able to serve that certificate for the handshake. - Do not attempt to match a "default" (random) certificate when SNI is present but unrecognized; return no certificate so a TLS alert happens instead. - Store an Instance in the list of instances even while the instance is still starting up (this allows access to the cert cache for performing renewals at startup, etc). Will be removed from list again if instance startup fails. - Laid groundwork for ACMEv2 and Let's Encrypt wildcard support. Server type plugins will need to be updated slightly to accommodate minor adjustments to their API (like passing in an Instance). This commit includes the changes for the HTTP server. Certain Caddyfile configurations might error out with this change, if they configured different TLS settings for the same hostname. This change trades some complexity for other complexity, but ultimately this new complexity is more correct and robust than earlier logic. Fixes #1991 Fixes #1994 Fixes #1303
2018-02-04 02:58:27 -05:00
testInst.context = stype.NewContext(testInst)
}
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
return &Controller{
tls: Restructure and improve certificate management - Expose the list of Caddy instances through caddy.Instances() - Added arbitrary storage to caddy.Instance - The cache of loaded certificates is no longer global; now scoped per-instance, meaning upon reload (like SIGUSR1) the old cert cache will be discarded entirely, whereas before, aggressively reloading config that added and removed lots of sites would cause unnecessary build-up in the cache over time. - Key certificates in the cache by their SHA-256 hash instead of by their names. This means certificates will not be duplicated in memory (within each instance), making Caddy much more memory-efficient for large-scale deployments with thousands of sites sharing certs. - Perform name-to-certificate lookups scoped per caddytls.Config instead of a single global lookup. This prevents certificates from stepping on each other when they overlap in their names. - Do not allow TLS configurations keyed by the same hostname to be different; this now throws an error. - Updated relevant tests, with a stark awareness that more tests are needed. - Change the NewContext function signature to include an *Instance. - Strongly recommend (basically require) use of caddytls.NewConfig() to create a new *caddytls.Config, to ensure pointers to the instance certificate cache are initialized properly. - Update the TLS-SNI challenge solver (even though TLS-SNI is disabled currently on the CA side). Store temporary challenge cert in instance cache, but do so directly by the ACME challenge name, not the hash. Modified the getCertificate function to check the cache directly for a name match if one isn't found otherwise. This will allow any caddytls.Config to be able to help solve a TLS-SNI challenge, with one extra side-effect that might actually be kind of interesting (and useless): clients could send a certificate's hash as the SNI and Caddy would be able to serve that certificate for the handshake. - Do not attempt to match a "default" (random) certificate when SNI is present but unrecognized; return no certificate so a TLS alert happens instead. - Store an Instance in the list of instances even while the instance is still starting up (this allows access to the cert cache for performing renewals at startup, etc). Will be removed from list again if instance startup fails. - Laid groundwork for ACMEv2 and Let's Encrypt wildcard support. Server type plugins will need to be updated slightly to accommodate minor adjustments to their API (like passing in an Instance). This commit includes the changes for the HTTP server. Certain Caddyfile configurations might error out with this change, if they configured different TLS settings for the same hostname. This change trades some complexity for other complexity, but ultimately this new complexity is more correct and robust than earlier logic. Fixes #1991 Fixes #1994 Fixes #1303
2018-02-04 02:58:27 -05:00
instance: testInst,
Rewrote Caddy from the ground up; initial commit of 0.9 branch These changes span work from the last ~4 months in an effort to make Caddy more extensible, reduce the coupling between its components, and lay a more robust foundation of code going forward into 1.0. A bunch of new features have been added, too, with even higher future potential. The most significant design change is an overall inversion of dependencies. Instead of the caddy package knowing about the server and the notion of middleware and config, the caddy package exposes an interface that other components plug into. This does introduce more indirection when reading the code, but every piece is very modular and pluggable. Even the HTTP server is pluggable. The caddy package has been moved to the top level, and main has been pushed into a subfolder called caddy. The actual logic of the main file has been pushed even further into caddy/caddymain/run.go so that custom builds of Caddy can be 'go get'able. The HTTPS logic was surgically separated into two parts to divide the TLS-specific code and the HTTPS-specific code. The caddytls package can now be used by any type of server that needs TLS, not just HTTP. I also added the ability to customize nearly every aspect of TLS at the site level rather than all sites sharing the same TLS configuration. Not all of this flexibility is exposed in the Caddyfile yet, but it may be in the future. Caddy can also generate self-signed certificates in memory for the convenience of a developer working on localhost who wants HTTPS. And Caddy now supports the DNS challenge, assuming at least one DNS provider is plugged in. Dozens, if not hundreds, of other minor changes swept through the code base as I literally started from an empty main function, copying over functions or files as needed, then adjusting them to fit in the new design. Most tests have been restored and adapted to the new API, but more work is needed there. A lot of what was "impossible" before is now possible, or can be made possible with minimal disruption of the code. For example, it's fairly easy to make plugins hook into another part of the code via callbacks. Plugins can do more than just be directives; we now have plugins that customize how the Caddyfile is loaded (useful when you need to get your configuration from a remote store). Site addresses no longer need be just a host and port. They can have a path, allowing you to scope a configuration to a specific path. There is no inheretance, however; each site configuration is distinct. Thanks to amazing work by Lucas Clemente, this commit adds experimental QUIC support. Turn it on using the -quic flag; your browser may have to be configured to enable it. Almost everything is here, but you will notice that most of the middle- ware are missing. After those are transferred over, we'll be ready for beta tests. I'm very excited to get this out. Thanks for everyone's help and patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
Dispenser: caddyfile.NewDispenser("Testfile", strings.NewReader(input)),
OncePerServerBlock: func(f func() error) error { return f() },
}
}