caddy/modules/caddyhttp/reverseproxy/reverseproxy.go

// Copyright 2015 Matthew Holt and The Caddy Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package reverseproxy

import (
	"context"
	"fmt"
	"io"
	"log"
	"net"
	"net/http"
	"net/url"
	"strings"
	"sync"
	"time"

	"golang.org/x/net/http/httpguts"
)

// ReverseProxy is an HTTP Handler that takes an incoming request and
// sends it to another server, proxying the response back to the
// client.
type ReverseProxy struct {
	// Director must be a function which modifies
	// the request into a new request to be sent
	// using Transport. Its response is then copied
	// back to the original client unmodified.
	// Director must not access the provided Request
	// after returning.
	Director func(*http.Request)

	// The transport used to perform proxy requests.
	// If nil, http.DefaultTransport is used.
	Transport http.RoundTripper

	// FlushInterval specifies the flush interval
	// to flush to the client while copying the
	// response body.
	// If zero, no periodic flushing is done.
	// A negative value means to flush immediately
	// after each write to the client.
	// The FlushInterval is ignored when ReverseProxy
	// recognizes a response as a streaming response;
	// for such responses, writes are flushed to the client
	// immediately.
	FlushInterval time.Duration

	// ErrorLog specifies an optional logger for errors
	// that occur when attempting to proxy the request.
	// If nil, logging goes to os.Stderr via the log package's
	// standard logger.
	ErrorLog *log.Logger

	// BufferPool optionally specifies a buffer pool to
	// get byte slices for use by io.CopyBuffer when
	// copying HTTP response bodies.
	BufferPool BufferPool

	// ModifyResponse is an optional function that modifies the
	// Response from the backend. It is called if the backend
	// returns a response at all, with any HTTP status code.
	// If the backend is unreachable, the optional ErrorHandler is
	// called without any call to ModifyResponse.
	//
	// If ModifyResponse returns an error, ErrorHandler is called
	// with its error value. If ErrorHandler is nil, its default
	// implementation is used.
	ModifyResponse func(*http.Response) error

	// ErrorHandler is an optional function that handles errors
	// reaching the backend or errors from ModifyResponse.
	//
	// If nil, the default is to log the provided error and return
	// a 502 Status Bad Gateway response.
	ErrorHandler func(http.ResponseWriter, *http.Request, error)
}

// A BufferPool is an interface for getting and returning temporary
// byte slices for use by io.CopyBuffer.
type BufferPool interface {
	Get() []byte
	Put([]byte)
}

func singleJoiningSlash(a, b string) string {
	aslash := strings.HasSuffix(a, "/")
	bslash := strings.HasPrefix(b, "/")
	switch {
	case aslash && bslash:
		return a + b[1:]
	case !aslash && !bslash:
		return a + "/" + b
	}
	return a + b
}

// NewSingleHostReverseProxy returns a new ReverseProxy that routes
// URLs to the scheme, host, and base path provided in target. If the
// target's path is "/base" and the incoming request was for "/dir",
// the target request will be for /base/dir.
// NewSingleHostReverseProxy does not rewrite the Host header.
// To rewrite Host headers, use ReverseProxy directly with a custom
// Director policy.
func NewSingleHostReverseProxy(target *url.URL) *ReverseProxy {
	targetQuery := target.RawQuery
	director := func(req *http.Request) {
		req.URL.Scheme = target.Scheme
		req.URL.Host = target.Host
		req.URL.Path = singleJoiningSlash(target.Path, req.URL.Path)
		if targetQuery == "" || req.URL.RawQuery == "" {
			req.URL.RawQuery = targetQuery + req.URL.RawQuery
		} else {
			req.URL.RawQuery = targetQuery + "&" + req.URL.RawQuery
		}
		if _, ok := req.Header["User-Agent"]; !ok {
			// explicitly disable User-Agent so it's not set to default value
			req.Header.Set("User-Agent", "")
		}
	}
	return &ReverseProxy{Director: director}
}

func copyHeader(dst, src http.Header) {
	for k, vv := range src {
		for _, v := range vv {
			dst.Add(k, v)
		}
	}
}

func cloneHeader(h http.Header) http.Header {
	h2 := make(http.Header, len(h))
	for k, vv := range h {
		vv2 := make([]string, len(vv))
		copy(vv2, vv)
		h2[k] = vv2
	}
	return h2
}

// Hop-by-hop headers. These are removed when sent to the backend.
// As of RFC 7230, hop-by-hop headers are required to appear in the
// Connection header field. These are the headers defined by the
// obsoleted RFC 2616 (section 13.5.1) and are used for backward
// compatibility.
var hopHeaders = []string{
	"Connection",
	"Proxy-Connection", // non-standard but still sent by libcurl and rejected by e.g. google
	"Keep-Alive",
	"Proxy-Authenticate",
	"Proxy-Authorization",
	"Te",      // canonicalized version of "TE"
	"Trailer", // not Trailers per URL above; https://www.rfc-editor.org/errata_search.php?eid=4522
	"Transfer-Encoding",
	"Upgrade",
}

func (p *ReverseProxy) defaultErrorHandler(rw http.ResponseWriter, req *http.Request, err error) {
	p.logf("http: proxy error: %v", err)
	rw.WriteHeader(http.StatusBadGateway)
}

func (p *ReverseProxy) getErrorHandler() func(http.ResponseWriter, *http.Request, error) {
	if p.ErrorHandler != nil {
		return p.ErrorHandler
	}
	return p.defaultErrorHandler
}

// modifyResponse conditionally runs the optional ModifyResponse hook
// and reports whether the request should proceed.
func (p *ReverseProxy) modifyResponse(rw http.ResponseWriter, res *http.Response, req *http.Request) bool {
	if p.ModifyResponse == nil {
		return true
	}
	if err := p.ModifyResponse(res); err != nil {
		res.Body.Close()
		p.getErrorHandler()(rw, req, err)
		return false
	}
	return true
}

func (p *ReverseProxy) ServeHTTP(rw http.ResponseWriter, req *http.Request) (*http.Response, error) {
	transport := p.Transport
	if transport == nil {
		transport = http.DefaultTransport
	}

	ctx := req.Context()
	if cn, ok := rw.(http.CloseNotifier); ok {
		var cancel context.CancelFunc
		ctx, cancel = context.WithCancel(ctx)
		defer cancel()
		notifyChan := cn.CloseNotify()
		go func() {
			select {
			case <-notifyChan:
				cancel()
			case <-ctx.Done():
			}
		}()
	}

	outreq := req.WithContext(ctx) // includes shallow copies of maps, but okay
	if req.ContentLength == 0 {
		outreq.Body = nil // Issue 16036: nil Body for http.Transport retries
	}

	outreq.Header = cloneHeader(req.Header)

	p.Director(outreq)
	outreq.Close = false

	reqUpType := upgradeType(outreq.Header)
	removeConnectionHeaders(outreq.Header)

	// Remove hop-by-hop headers to the backend. Especially
	// important is "Connection" because we want a persistent
	// connection, regardless of what the client sent to us.
	for _, h := range hopHeaders {
		hv := outreq.Header.Get(h)
		if hv == "" {
			continue
		}
		if h == "Te" && hv == "trailers" {
			// Issue 21096: tell backend applications that
			// care about trailer support that we support
			// trailers. (We do, but we don't go out of
			// our way to advertise that unless the
			// incoming client request thought it was
			// worth mentioning)
			continue
		}
		outreq.Header.Del(h)
	}

	// After stripping all the hop-by-hop connection headers above, add back any
	// necessary for protocol upgrades, such as for websockets.
	if reqUpType != "" {
		outreq.Header.Set("Connection", "Upgrade")
		outreq.Header.Set("Upgrade", reqUpType)
	}

	if clientIP, _, err := net.SplitHostPort(req.RemoteAddr); err == nil {
		// If we aren't the first proxy retain prior
		// X-Forwarded-For information as a comma+space
		// separated list and fold multiple headers into one.
		if prior, ok := outreq.Header["X-Forwarded-For"]; ok {
			clientIP = strings.Join(prior, ", ") + ", " + clientIP
		}
		outreq.Header.Set("X-Forwarded-For", clientIP)
	}

	res, err := transport.RoundTrip(outreq)
	if err != nil {
		p.getErrorHandler()(rw, outreq, err)
		return nil, err
	}

	// Deal with 101 Switching Protocols responses: (WebSocket, h2c, etc)
	if res.StatusCode == http.StatusSwitchingProtocols {
		if !p.modifyResponse(rw, res, outreq) {
			return res, nil
		}

		p.handleUpgradeResponse(rw, outreq, res)
		return res, nil
	}

	removeConnectionHeaders(res.Header)

	for _, h := range hopHeaders {
		res.Header.Del(h)
	}

	if !p.modifyResponse(rw, res, outreq) {
		return res, nil
	}

	copyHeader(rw.Header(), res.Header)

	// The "Trailer" header isn't included in the Transport's response,
	// at least for *http.Transport. Build it up from Trailer.
	announcedTrailers := len(res.Trailer)
	if announcedTrailers > 0 {
		trailerKeys := make([]string, 0, len(res.Trailer))
		for k := range res.Trailer {
			trailerKeys = append(trailerKeys, k)
		}
		rw.Header().Add("Trailer", strings.Join(trailerKeys, ", "))
	}

	rw.WriteHeader(res.StatusCode)

	err = p.copyResponse(rw, res.Body, p.flushInterval(req, res))
	if err != nil {
		defer res.Body.Close()
		// Since we're streaming the response, if we run into an error all we can do
		// is abort the request. Issue 23643: ReverseProxy should use ErrAbortHandler
		// on read error while copying body.
		if !shouldPanicOnCopyError(req) {
			p.logf("suppressing panic for copyResponse error in test; copy error: %v", err)
			return nil, err
		}

		panic(http.ErrAbortHandler)
	}
	res.Body.Close() // close now, instead of defer, to populate res.Trailer

	if len(res.Trailer) > 0 {
		// Force chunking if we saw a response trailer.
		// This prevents net/http from calculating the length for short
		// bodies and adding a Content-Length.
		if fl, ok := rw.(http.Flusher); ok {
			fl.Flush()
		}
	}

	if len(res.Trailer) == announcedTrailers {
		copyHeader(rw.Header(), res.Trailer)
		return res, nil
	}

	for k, vv := range res.Trailer {
		k = http.TrailerPrefix + k
		for _, v := range vv {
			rw.Header().Add(k, v)
		}
	}

	return res, nil
}

var inOurTests bool // whether we're in our own tests

// shouldPanicOnCopyError reports whether the reverse proxy should
// panic with http.ErrAbortHandler. This is the right thing to do by
// default, but Go 1.10 and earlier did not, so existing unit tests
// weren't expecting panics. Only panic in our own tests, or when
// running under the HTTP server.
func shouldPanicOnCopyError(req *http.Request) bool {
	if inOurTests {
		// Our tests know to handle this panic.
		return true
	}
	if req.Context().Value(http.ServerContextKey) != nil {
		// We seem to be running under an HTTP server, so
		// it'll recover the panic.
		return true
	}
	// Otherwise act like Go 1.10 and earlier to not break
	// existing tests.
	return false
}

// removeConnectionHeaders removes hop-by-hop headers listed in the "Connection" header of h.
// See RFC 7230, section 6.1
func removeConnectionHeaders(h http.Header) {
	if c := h.Get("Connection"); c != "" {
		for _, f := range strings.Split(c, ",") {
			if f = strings.TrimSpace(f); f != "" {
				h.Del(f)
			}
		}
	}
}

// flushInterval returns the p.FlushInterval value, conditionally
// overriding its value for a specific request/response.
func (p *ReverseProxy) flushInterval(req *http.Request, res *http.Response) time.Duration {
	resCT := res.Header.Get("Content-Type")

	// For Server-Sent Events responses, flush immediately.
	// The MIME type is defined in https://www.w3.org/TR/eventsource/#text-event-stream
	if resCT == "text/event-stream" {
		return -1 // negative means immediately
	}

	// TODO: more specific cases? e.g. res.ContentLength == -1?
	return p.FlushInterval
}

func (p *ReverseProxy) copyResponse(dst io.Writer, src io.Reader, flushInterval time.Duration) error {
	if flushInterval != 0 {
		if wf, ok := dst.(writeFlusher); ok {
			mlw := &maxLatencyWriter{
				dst:     wf,
				latency: flushInterval,
			}
			defer mlw.stop()
			dst = mlw
		}
	}

	var buf []byte
	if p.BufferPool != nil {
		buf = p.BufferPool.Get()
		defer p.BufferPool.Put(buf)
	}
	_, err := p.copyBuffer(dst, src, buf)
	return err
}

// copyBuffer returns any write errors or non-EOF read errors, and the amount
// of bytes written.
func (p *ReverseProxy) copyBuffer(dst io.Writer, src io.Reader, buf []byte) (int64, error) {
	if len(buf) == 0 {
		buf = make([]byte, 32*1024)
	}
	var written int64
	for {
		nr, rerr := src.Read(buf)
		if rerr != nil && rerr != io.EOF && rerr != context.Canceled {
			p.logf("httputil: ReverseProxy read error during body copy: %v", rerr)
		}
		if nr > 0 {
			nw, werr := dst.Write(buf[:nr])
			if nw > 0 {
				written += int64(nw)
			}
			if werr != nil {
				return written, werr
			}
			if nr != nw {
				return written, io.ErrShortWrite
			}
		}
		if rerr != nil {
			if rerr == io.EOF {
				rerr = nil
			}
			return written, rerr
		}
	}
}

func (p *ReverseProxy) logf(format string, args ...interface{}) {
	if p.ErrorLog != nil {
		p.ErrorLog.Printf(format, args...)
	} else {
		log.Printf(format, args...)
	}
}

type writeFlusher interface {
	io.Writer
	http.Flusher
}

type maxLatencyWriter struct {
	dst     writeFlusher
	latency time.Duration // non-zero; negative means to flush immediately

	mu           sync.Mutex // protects t, flushPending, and dst.Flush
	t            *time.Timer
	flushPending bool
}

func (m *maxLatencyWriter) Write(p []byte) (n int, err error) {
	m.mu.Lock()
	defer m.mu.Unlock()
	n, err = m.dst.Write(p)
	if m.latency < 0 {
		m.dst.Flush()
		return
	}
	if m.flushPending {
		return
	}
	if m.t == nil {
		m.t = time.AfterFunc(m.latency, m.delayedFlush)
	} else {
		m.t.Reset(m.latency)
	}
	m.flushPending = true
	return
}

func (m *maxLatencyWriter) delayedFlush() {
	m.mu.Lock()
	defer m.mu.Unlock()
	if !m.flushPending { // if stop was called but AfterFunc already started this goroutine
		return
	}
	m.dst.Flush()
	m.flushPending = false
}

func (m *maxLatencyWriter) stop() {
	m.mu.Lock()
	defer m.mu.Unlock()
	m.flushPending = false
	if m.t != nil {
		m.t.Stop()
	}
}

func upgradeType(h http.Header) string {
	if !httpguts.HeaderValuesContainsToken(h["Connection"], "Upgrade") {
		return ""
	}
	return strings.ToLower(h.Get("Upgrade"))
}

func (p *ReverseProxy) handleUpgradeResponse(rw http.ResponseWriter, req *http.Request, res *http.Response) {
	reqUpType := upgradeType(req.Header)
	resUpType := upgradeType(res.Header)
	if reqUpType != resUpType {
		p.getErrorHandler()(rw, req, fmt.Errorf("backend tried to switch protocol %q when %q was requested", resUpType, reqUpType))
		return
	}

	copyHeader(res.Header, rw.Header())

	hj, ok := rw.(http.Hijacker)
	if !ok {
		p.getErrorHandler()(rw, req, fmt.Errorf("can't switch protocols using non-Hijacker ResponseWriter type %T", rw))
		return
	}
	backConn, ok := res.Body.(io.ReadWriteCloser)
	if !ok {
		p.getErrorHandler()(rw, req, fmt.Errorf("internal error: 101 switching protocols response with non-writable body"))
		return
	}
	defer backConn.Close()
	conn, brw, err := hj.Hijack()
	if err != nil {
		p.getErrorHandler()(rw, req, fmt.Errorf("Hijack failed on protocol switch: %v", err))
		return
	}
	defer conn.Close()
	res.Body = nil // so res.Write only writes the headers; we have res.Body in backConn above
	if err := res.Write(brw); err != nil {
		p.getErrorHandler()(rw, req, fmt.Errorf("response write: %v", err))
		return
	}
	if err := brw.Flush(); err != nil {
		p.getErrorHandler()(rw, req, fmt.Errorf("response flush: %v", err))
		return
	}
	errc := make(chan error, 1)
	spc := switchProtocolCopier{user: conn, backend: backConn}
	go spc.copyToBackend(errc)
	go spc.copyFromBackend(errc)
	<-errc
	return
}

// switchProtocolCopier exists so goroutines proxying data back and
// forth have nice names in stacks.
type switchProtocolCopier struct {
	user, backend io.ReadWriter
}

func (c switchProtocolCopier) copyFromBackend(errc chan<- error) {
	_, err := io.Copy(c.user, c.backend)
	errc <- err
}

func (c switchProtocolCopier) copyToBackend(errc chan<- error) {
	_, err := io.Copy(c.backend, c.user)
	errc <- err
}