Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
package caddytls
|
2016-02-11 02:06:05 -05:00
|
|
|
|
|
|
|
import (
|
|
|
|
"encoding/json"
|
|
|
|
"errors"
|
|
|
|
"fmt"
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
"log"
|
2016-02-11 02:06:05 -05:00
|
|
|
"net"
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
"net/url"
|
|
|
|
"strings"
|
2016-02-11 02:06:05 -05:00
|
|
|
"sync"
|
|
|
|
"time"
|
|
|
|
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
"github.com/mholt/caddy"
|
2016-02-11 02:06:05 -05:00
|
|
|
"github.com/xenolf/lego/acme"
|
|
|
|
)
|
|
|
|
|
|
|
|
// acmeMu ensures that only one ACME challenge occurs at a time.
|
|
|
|
var acmeMu sync.Mutex
|
|
|
|
|
2016-09-14 23:30:49 -05:00
|
|
|
// ACMEClient is a wrapper over acme.Client with
|
|
|
|
// some custom state attached. It is used to obtain,
|
|
|
|
// renew, and revoke certificates with ACME.
|
2016-02-11 02:06:05 -05:00
|
|
|
type ACMEClient struct {
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
AllowPrompts bool
|
|
|
|
config *Config
|
2016-09-14 23:30:49 -05:00
|
|
|
acmeClient *acme.Client
|
2016-02-11 02:06:05 -05:00
|
|
|
}
|
|
|
|
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
// newACMEClient creates a new ACMEClient given an email and whether
|
|
|
|
// prompting the user is allowed. It's a variable so we can mock in tests.
|
|
|
|
var newACMEClient = func(config *Config, allowPrompts bool) (*ACMEClient, error) {
|
2016-07-08 08:32:31 -05:00
|
|
|
storage, err := config.StorageFor(config.CAUrl)
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
2016-02-11 02:06:05 -05:00
|
|
|
// Look up or create the LE user account
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
leUser, err := getUser(storage, config.ACMEEmail)
|
2016-02-11 02:06:05 -05:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
// ensure key type is set
|
|
|
|
keyType := DefaultKeyType
|
|
|
|
if config.KeyType != "" {
|
|
|
|
keyType = config.KeyType
|
|
|
|
}
|
|
|
|
|
|
|
|
// ensure CA URL (directory endpoint) is set
|
|
|
|
caURL := DefaultCAUrl
|
|
|
|
if config.CAUrl != "" {
|
|
|
|
caURL = config.CAUrl
|
|
|
|
}
|
|
|
|
|
|
|
|
// ensure endpoint is secure (assume HTTPS if scheme is missing)
|
|
|
|
if !strings.Contains(caURL, "://") {
|
|
|
|
caURL = "https://" + caURL
|
|
|
|
}
|
|
|
|
u, err := url.Parse(caURL)
|
2016-09-05 11:30:46 -05:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
2016-06-04 23:50:23 -05:00
|
|
|
if u.Scheme != "https" && !caddy.IsLoopback(u.Host) && !strings.HasPrefix(u.Host, "10.") {
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
return nil, fmt.Errorf("%s: insecure CA URL (HTTPS required)", caURL)
|
|
|
|
}
|
|
|
|
|
2016-02-11 02:06:05 -05:00
|
|
|
// The client facilitates our communication with the CA server.
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
client, err := acme.NewClient(caURL, &leUser, keyType)
|
2016-02-11 02:06:05 -05:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
// If not registered, the user must register an account with the CA
|
|
|
|
// and agree to terms
|
|
|
|
if leUser.Registration == nil {
|
|
|
|
reg, err := client.Register()
|
|
|
|
if err != nil {
|
|
|
|
return nil, errors.New("registration error: " + err.Error())
|
|
|
|
}
|
|
|
|
leUser.Registration = reg
|
|
|
|
|
|
|
|
if allowPrompts { // can't prompt a user who isn't there
|
|
|
|
if !Agreed && reg.TosURL == "" {
|
|
|
|
Agreed = promptUserAgreement(saURL, false) // TODO - latest URL
|
|
|
|
}
|
|
|
|
if !Agreed && reg.TosURL == "" {
|
|
|
|
return nil, errors.New("user must agree to terms")
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
err = client.AgreeToTOS()
|
|
|
|
if err != nil {
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
saveUser(storage, leUser) // Might as well try, right?
|
2016-02-11 02:06:05 -05:00
|
|
|
return nil, errors.New("error agreeing to terms: " + err.Error())
|
|
|
|
}
|
|
|
|
|
|
|
|
// save user to the file system
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
err = saveUser(storage, leUser)
|
2016-02-11 02:06:05 -05:00
|
|
|
if err != nil {
|
|
|
|
return nil, errors.New("could not save user: " + err.Error())
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-09-14 23:30:49 -05:00
|
|
|
c := &ACMEClient{
|
|
|
|
AllowPrompts: allowPrompts,
|
|
|
|
config: config,
|
|
|
|
acmeClient: client,
|
|
|
|
}
|
2016-02-11 02:06:05 -05:00
|
|
|
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
if config.DNSProvider == "" {
|
|
|
|
// Use HTTP and TLS-SNI challenges by default
|
2016-02-11 02:06:05 -05:00
|
|
|
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
// See if HTTP challenge needs to be proxied
|
2016-08-15 13:08:51 -05:00
|
|
|
useHTTPPort := "" // empty port value will use challenge default
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
if caddy.HasListenerWithAddress(net.JoinHostPort(config.ListenHost, HTTPChallengePort)) {
|
2016-08-15 13:08:51 -05:00
|
|
|
useHTTPPort = config.AltHTTPPort
|
|
|
|
if useHTTPPort == "" {
|
|
|
|
useHTTPPort = DefaultHTTPAlternatePort
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// See if TLS challenge needs to be handled by our own facilities
|
|
|
|
if caddy.HasListenerWithAddress(net.JoinHostPort(config.ListenHost, TLSSNIChallengePort)) {
|
2016-09-14 23:30:49 -05:00
|
|
|
c.acmeClient.SetChallengeProvider(acme.TLSSNI01, tlsSniSolver{})
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
}
|
2016-08-15 13:08:51 -05:00
|
|
|
|
|
|
|
// Always respect user's bind preferences by using config.ListenHost
|
2016-09-14 23:30:49 -05:00
|
|
|
err := c.acmeClient.SetHTTPAddress(net.JoinHostPort(config.ListenHost, useHTTPPort))
|
2016-08-15 13:08:51 -05:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
2016-09-14 23:30:49 -05:00
|
|
|
err = c.acmeClient.SetTLSAddress(net.JoinHostPort(config.ListenHost, ""))
|
2016-08-15 13:08:51 -05:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
2016-02-11 02:06:05 -05:00
|
|
|
} else {
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
// Otherwise, DNS challenge it is
|
|
|
|
|
|
|
|
// Load provider constructor function
|
|
|
|
provFn, ok := dnsProviders[config.DNSProvider]
|
|
|
|
if !ok {
|
|
|
|
return nil, errors.New("unknown DNS provider by name '" + config.DNSProvider + "'")
|
|
|
|
}
|
|
|
|
|
2016-08-15 13:08:51 -05:00
|
|
|
// We could pass credentials to create the provider, but for now
|
|
|
|
// just let the solver package get them from the environment
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
prov, err := provFn()
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
// Use the DNS challenge exclusively
|
2016-09-14 23:30:49 -05:00
|
|
|
c.acmeClient.ExcludeChallenges([]acme.Challenge{acme.HTTP01, acme.TLSSNI01})
|
|
|
|
c.acmeClient.SetChallengeProvider(acme.DNS01, prov)
|
2016-02-11 02:06:05 -05:00
|
|
|
}
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
|
|
|
|
return c, nil
|
2016-02-11 02:06:05 -05:00
|
|
|
}
|
|
|
|
|
2016-09-14 23:30:49 -05:00
|
|
|
// Obtain obtains a single certificate for name. It stores the certificate
|
|
|
|
// on the disk if successful. This function is safe for concurrent use.
|
|
|
|
//
|
|
|
|
// Right now our storage mechanism only supports one name per certificate,
|
|
|
|
// so this function (along with Renew and Revoke) only accepts one domain
|
|
|
|
// as input. It can be easily modified to support SAN certificates if our
|
|
|
|
// storage mechanism is upgraded later.
|
|
|
|
//
|
|
|
|
// Callers who have access to a Config value should use the ObtainCert
|
|
|
|
// method on that instead of this lower-level method.
|
|
|
|
func (c *ACMEClient) Obtain(name string) error {
|
|
|
|
// Get access to ACME storage
|
|
|
|
storage, err := c.config.StorageFor(c.config.CAUrl)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
// We must lock the obtain with the storage engine
|
|
|
|
if lockObtained, err := storage.LockRegister(name); err != nil {
|
|
|
|
return err
|
|
|
|
} else if !lockObtained {
|
|
|
|
log.Printf("[INFO] Certificate for %v is already being obtained elsewhere", name)
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
defer func() {
|
|
|
|
if err := storage.UnlockRegister(name); err != nil {
|
|
|
|
log.Printf("[ERROR] Unable to unlock obtain lock for %v: %v", name, err)
|
|
|
|
}
|
|
|
|
}()
|
|
|
|
|
2016-02-11 02:06:05 -05:00
|
|
|
Attempts:
|
|
|
|
for attempts := 0; attempts < 2; attempts++ {
|
2016-09-14 23:30:49 -05:00
|
|
|
namesObtaining.Add([]string{name})
|
2016-02-11 02:06:05 -05:00
|
|
|
acmeMu.Lock()
|
2016-09-14 23:30:49 -05:00
|
|
|
certificate, failures := c.acmeClient.ObtainCertificate([]string{name}, true, nil)
|
2016-02-11 02:06:05 -05:00
|
|
|
acmeMu.Unlock()
|
2016-09-14 23:30:49 -05:00
|
|
|
namesObtaining.Remove([]string{name})
|
2016-02-11 02:06:05 -05:00
|
|
|
if len(failures) > 0 {
|
|
|
|
// Error - try to fix it or report it to the user and abort
|
|
|
|
var errMsg string // we'll combine all the failures into a single error message
|
|
|
|
var promptedForAgreement bool // only prompt user for agreement at most once
|
|
|
|
|
|
|
|
for errDomain, obtainErr := range failures {
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
if obtainErr == nil {
|
|
|
|
continue
|
|
|
|
}
|
2016-02-11 02:06:05 -05:00
|
|
|
if tosErr, ok := obtainErr.(acme.TOSError); ok {
|
|
|
|
// Terms of Service agreement error; we can probably deal with this
|
|
|
|
if !Agreed && !promptedForAgreement && c.AllowPrompts {
|
|
|
|
Agreed = promptUserAgreement(tosErr.Detail, true) // TODO: Use latest URL
|
|
|
|
promptedForAgreement = true
|
|
|
|
}
|
|
|
|
if Agreed || !c.AllowPrompts {
|
2016-09-14 23:30:49 -05:00
|
|
|
err := c.acmeClient.AgreeToTOS()
|
2016-02-11 02:06:05 -05:00
|
|
|
if err != nil {
|
|
|
|
return errors.New("error agreeing to updated terms: " + err.Error())
|
|
|
|
}
|
|
|
|
continue Attempts
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// If user did not agree or it was any other kind of error, just append to the list of errors
|
|
|
|
errMsg += "[" + errDomain + "] failed to get certificate: " + obtainErr.Error() + "\n"
|
|
|
|
}
|
|
|
|
return errors.New(errMsg)
|
|
|
|
}
|
|
|
|
|
|
|
|
// Success - immediately save the certificate resource
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
err = saveCertResource(storage, certificate)
|
2016-02-11 02:06:05 -05:00
|
|
|
if err != nil {
|
2016-09-14 23:30:49 -05:00
|
|
|
return fmt.Errorf("error saving assets for %v: %v", name, err)
|
2016-02-11 02:06:05 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
break
|
|
|
|
}
|
|
|
|
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
2016-09-14 23:30:49 -05:00
|
|
|
// Renew renews the managed certificate for name. This function is
|
|
|
|
// safe for concurrent use.
|
2016-02-11 02:06:05 -05:00
|
|
|
//
|
2016-09-14 23:30:49 -05:00
|
|
|
// Callers who have access to a Config value should use the RenewCert
|
|
|
|
// method on that instead of this lower-level method.
|
2016-02-11 02:06:05 -05:00
|
|
|
func (c *ACMEClient) Renew(name string) error {
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
// Get access to ACME storage
|
2016-07-08 08:32:31 -05:00
|
|
|
storage, err := c.config.StorageFor(c.config.CAUrl)
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
2016-07-08 08:32:31 -05:00
|
|
|
// We must lock the renewal with the storage engine
|
|
|
|
if lockObtained, err := storage.LockRegister(name); err != nil {
|
2016-02-11 02:06:05 -05:00
|
|
|
return err
|
2016-07-08 08:32:31 -05:00
|
|
|
} else if !lockObtained {
|
|
|
|
log.Printf("[INFO] Certificate for %v is already being renewed elsewhere", name)
|
|
|
|
return nil
|
2016-02-11 02:06:05 -05:00
|
|
|
}
|
2016-07-08 08:32:31 -05:00
|
|
|
defer func() {
|
|
|
|
if err := storage.UnlockRegister(name); err != nil {
|
|
|
|
log.Printf("[ERROR] Unable to unlock renewal lock for %v: %v", name, err)
|
|
|
|
}
|
|
|
|
}()
|
|
|
|
|
|
|
|
// Prepare for renewal (load PEM cert, key, and meta)
|
|
|
|
siteData, err := storage.LoadSite(name)
|
2016-02-11 02:06:05 -05:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
var certMeta acme.CertificateResource
|
2016-07-08 08:32:31 -05:00
|
|
|
err = json.Unmarshal(siteData.Meta, &certMeta)
|
|
|
|
certMeta.Certificate = siteData.Cert
|
|
|
|
certMeta.PrivateKey = siteData.Key
|
2016-02-11 02:06:05 -05:00
|
|
|
|
|
|
|
// Perform renewal and retry if necessary, but not too many times.
|
|
|
|
var newCertMeta acme.CertificateResource
|
|
|
|
var success bool
|
|
|
|
for attempts := 0; attempts < 2; attempts++ {
|
2016-08-11 00:44:43 -05:00
|
|
|
namesObtaining.Add([]string{name})
|
2016-02-11 02:06:05 -05:00
|
|
|
acmeMu.Lock()
|
2016-09-14 23:30:49 -05:00
|
|
|
newCertMeta, err = c.acmeClient.RenewCertificate(certMeta, true)
|
2016-02-11 02:06:05 -05:00
|
|
|
acmeMu.Unlock()
|
2016-08-11 00:44:43 -05:00
|
|
|
namesObtaining.Remove([]string{name})
|
2016-02-11 02:06:05 -05:00
|
|
|
if err == nil {
|
|
|
|
success = true
|
|
|
|
break
|
|
|
|
}
|
|
|
|
|
2016-09-14 23:30:49 -05:00
|
|
|
// If the legal terms were updated and need to be
|
|
|
|
// agreed to again, we can handle that.
|
2016-02-11 02:06:05 -05:00
|
|
|
if _, ok := err.(acme.TOSError); ok {
|
2016-09-14 23:30:49 -05:00
|
|
|
err := c.acmeClient.AgreeToTOS()
|
2016-02-11 02:06:05 -05:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
|
|
|
|
// For any other kind of error, wait 10s and try again.
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
wait := 10 * time.Second
|
|
|
|
log.Printf("[ERROR] Renewing: %v; trying again in %s", err, wait)
|
|
|
|
time.Sleep(wait)
|
2016-02-11 02:06:05 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
if !success {
|
|
|
|
return errors.New("too many renewal attempts; last error: " + err.Error())
|
|
|
|
}
|
|
|
|
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
return saveCertResource(storage, newCertMeta)
|
|
|
|
}
|
|
|
|
|
|
|
|
// Revoke revokes the certificate for name and deltes
|
|
|
|
// it from storage.
|
|
|
|
func (c *ACMEClient) Revoke(name string) error {
|
2016-07-08 08:32:31 -05:00
|
|
|
storage, err := c.config.StorageFor(c.config.CAUrl)
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
2016-08-18 11:28:43 -05:00
|
|
|
siteExists, err := storage.SiteExists(name)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
if !siteExists {
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
return errors.New("no certificate and key for " + name)
|
|
|
|
}
|
|
|
|
|
2016-07-08 08:32:31 -05:00
|
|
|
siteData, err := storage.LoadSite(name)
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
2016-09-14 23:30:49 -05:00
|
|
|
err = c.acmeClient.RevokeCertificate(siteData.Cert)
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
2016-07-08 08:32:31 -05:00
|
|
|
err = storage.DeleteSite(name)
|
Rewrote Caddy from the ground up; initial commit of 0.9 branch
These changes span work from the last ~4 months in an effort to make
Caddy more extensible, reduce the coupling between its components, and
lay a more robust foundation of code going forward into 1.0. A bunch of
new features have been added, too, with even higher future potential.
The most significant design change is an overall inversion of
dependencies. Instead of the caddy package knowing about the server
and the notion of middleware and config, the caddy package exposes an
interface that other components plug into. This does introduce more
indirection when reading the code, but every piece is very modular and
pluggable. Even the HTTP server is pluggable.
The caddy package has been moved to the top level, and main has been
pushed into a subfolder called caddy. The actual logic of the main
file has been pushed even further into caddy/caddymain/run.go so that
custom builds of Caddy can be 'go get'able.
The HTTPS logic was surgically separated into two parts to divide the
TLS-specific code and the HTTPS-specific code. The caddytls package can
now be used by any type of server that needs TLS, not just HTTP. I also
added the ability to customize nearly every aspect of TLS at the site
level rather than all sites sharing the same TLS configuration. Not all
of this flexibility is exposed in the Caddyfile yet, but it may be in
the future. Caddy can also generate self-signed certificates in memory
for the convenience of a developer working on localhost who wants HTTPS.
And Caddy now supports the DNS challenge, assuming at least one DNS
provider is plugged in.
Dozens, if not hundreds, of other minor changes swept through the code
base as I literally started from an empty main function, copying over
functions or files as needed, then adjusting them to fit in the new
design. Most tests have been restored and adapted to the new API,
but more work is needed there.
A lot of what was "impossible" before is now possible, or can be made
possible with minimal disruption of the code. For example, it's fairly
easy to make plugins hook into another part of the code via callbacks.
Plugins can do more than just be directives; we now have plugins that
customize how the Caddyfile is loaded (useful when you need to get your
configuration from a remote store).
Site addresses no longer need be just a host and port. They can have a
path, allowing you to scope a configuration to a specific path. There is
no inheretance, however; each site configuration is distinct.
Thanks to amazing work by Lucas Clemente, this commit adds experimental
QUIC support. Turn it on using the -quic flag; your browser may have
to be configured to enable it.
Almost everything is here, but you will notice that most of the middle-
ware are missing. After those are transferred over, we'll be ready for
beta tests.
I'm very excited to get this out. Thanks for everyone's help and
patience these last few months. I hope you like it!!
2016-06-04 18:00:29 -05:00
|
|
|
if err != nil {
|
|
|
|
return errors.New("certificate revoked, but unable to delete certificate file: " + err.Error())
|
|
|
|
}
|
|
|
|
|
|
|
|
return nil
|
2016-02-11 02:06:05 -05:00
|
|
|
}
|
2016-08-10 23:13:06 -05:00
|
|
|
|
|
|
|
// namesObtaining is a set of hostnames with thread-safe
|
|
|
|
// methods. A name should be in this set only while this
|
|
|
|
// package is in the process of obtaining a certificate
|
|
|
|
// for the name. ACME challenges that are received for
|
|
|
|
// names which are not in this set were not initiated by
|
|
|
|
// this package and probably should not be handled by
|
|
|
|
// this package.
|
|
|
|
var namesObtaining = nameCoordinator{names: make(map[string]struct{})}
|
|
|
|
|
|
|
|
type nameCoordinator struct {
|
|
|
|
names map[string]struct{}
|
|
|
|
mu sync.RWMutex
|
|
|
|
}
|
|
|
|
|
|
|
|
// Add adds names to c. It is safe for concurrent use.
|
|
|
|
func (c *nameCoordinator) Add(names []string) {
|
|
|
|
c.mu.Lock()
|
|
|
|
for _, name := range names {
|
|
|
|
c.names[strings.ToLower(name)] = struct{}{}
|
|
|
|
}
|
|
|
|
c.mu.Unlock()
|
|
|
|
}
|
|
|
|
|
|
|
|
// Remove removes names from c. It is safe for concurrent use.
|
|
|
|
func (c *nameCoordinator) Remove(names []string) {
|
|
|
|
c.mu.Lock()
|
|
|
|
for _, name := range names {
|
|
|
|
delete(c.names, strings.ToLower(name))
|
|
|
|
}
|
|
|
|
c.mu.Unlock()
|
|
|
|
}
|
|
|
|
|
|
|
|
// Has returns true if c has name. It is safe for concurrent use.
|
|
|
|
func (c *nameCoordinator) Has(name string) bool {
|
|
|
|
hostname, _, err := net.SplitHostPort(name)
|
|
|
|
if err != nil {
|
|
|
|
hostname = name
|
|
|
|
}
|
|
|
|
c.mu.RLock()
|
|
|
|
_, ok := c.names[strings.ToLower(hostname)]
|
|
|
|
c.mu.RUnlock()
|
|
|
|
return ok
|
|
|
|
}
|